Getting the trailer height right makes towing smoother and safer. This hitch gives you a simple 2" drop or 2" rise, perfect for keeping your trailer level with your tow setup. No complicated adjustments—just set it up and go. A level load tracks straighter and brakes more predictably, so every haul feels steady from start to finish.
When you’re pulling serious weight, you want a hitch that’s built to back you up. The BulletProof Aluminum Hitch handles up to 14,000 lbs on the 2-5/16" ball and 10,000 lbs on the 2" ball, with a 2,000-lb maximum tongue weight capacity. That’s plenty of strength for heavy campers, boats, or loaded trailers. It’s built from aluminum with stainless steel balls—strong enough for the job without adding extra bulk.
If you tow more than one trailer, this setup makes switching easy. The dual-ball design gives you both a 2" and a 2-5/16" option, and the stainless platform flips in seconds when you need to change sizes. Quick pins hold everything tight, so you can switch from a lighter utility trailer to a heavier hauler without hunting for tools or parts.
Road grime, salt, and moisture can take their toll on towing gear. This hitch fights back with an aluminum body and stainless steel balls that resist rust and corrosion even after long use. The pins are stainless too, so you won’t be replacing hardware after a rough season. It’s made to stay strong and look sharp year after year.
Heavy-duty doesn’t have to mean heavy to lift. Weighing just 17 lbs, this hitch is easy to install or remove without strain. You get all the pulling capacity—up to 14,000 lbs—without lugging around a chunk of steel every time you hook up a trailer.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the BulletProof hitches aluminum adjustable two ball mount with a two inch drop or rise for a two inch hitch. Has a 14,000 pound maximum gross towing weight capacity. Now this is an aluminum ball mount with a stainless steel dual ball platform, which will slide into a two inch hitch receiver, and let you hook up your trailer to your tow vehicle. Basically, the shank portion right here is what'll slide into your two inch hitch receiver. And when you do install it, it will require a hitch pining clip or a hitch lock for securing it to your hitch receiver.
Those items are not included. We do sell those separately on our website. You wanna make sure to get a hitch pin that'll have a diameter of 5/8 of an inch. Now up front you can see it has the dual hitch balls. These will provide the connection point for your trailer coupler, and it is two different size stainless steel hitch balls, a two inch diameter or a 2 5/16 inch diameter.
So it's gonna let you tow trailers with different coupler sizes. And it's pretty easy to switch the ball if you want to use either one. Right now it's set up to use the 2 5/16 diameter. If you want to switch it to the two inch, you just pull out these two clips, pull out the two pins, turn the ball over, and then you can use the two inch. Put your clip pins and clips back in.
If you notice the adjustment holes, it does adjust in one inch increments. Now we've mentioned the pins and clips. We just pull one of the clips out. Pull one of the pins out. They use a 5/8 inch diameter, corrosion resistant, hardened steel pin.
Has a nice nickel undercoat with a zinc plating top coat for best corrosion resistance. And then the clip is included. So you just slide that through, line up your hole with the clip, go ahead and push your clip in. And just like that, you're all set to go. Now the gross towing weight capacity on this is gonna depend on what diameter ball size you use. So if you use the larger 2 5/16 inch diameter ball gets you a 14,000 pound gross towing weight capacity. If you switch it to the smaller two inch diameter ball, it'll get you a 10,000 pound gross towing weight capacity. The tongue weight will stay the same. It's 2,000 pounds. And we mentioned it is an adjustable height, so it'll let you tow trailers of different heights with the same vehicle. Basically this ball mount will slide up or down, in the drop or rise position. And as we mentioned, it'll get you a maximum drop of two inches or maximum rise of two inches. You just slide this up or down along the shank, secure it in place with those two pins and clips. And basically it's gonna offer you five different mounting positions. The ball mount is a solid lightweight aluminum, has a nice sleek polished finish to it that doesn't chip or corrode. And it is machined to an extremely tight tolerance for a nice precise fit. Again, the application this fits onto a two inch by two inch trailer hitch receiver. Last thing I wanna do is just give you a couple measurements. We're gonna measure the distance from the center of the hitch pin holes to the center of the ball. So if we measure using the first hitch pin hole to the center of the ball, we'll be able to see is gonna be right at eight inches. And if we go from the second hole to the center of the ball is gonna get you a measurement of 9 1/4 inches. But that's gonna do it for a look at this BulletProof hitches aluminum adjustable two ball mount with the two inch dropper rise for your two inch hitch.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.