What Frame Dimensions Does Trailer Valet JXS part # TV34FR Fit

Question

Question:

Your QandA says it will fit 5x3 1/2inch frame but ad says 4 3/4x3 1/2inch frame. My trailer is 5x3. Will that fit?

asked by: Dick C

0

Expert Reply:

Sorry for any confusion but the Trailer Valet JXS part # TV34FR that you referenced fits the frame dimensions of 4-3/4" tall x 3-3/4" deep and requires 6 inches of clearance on the frame for the width of the bracket. There isn't a version that would fit a 5 inch frame.

expert reply by: Jameson C

0

Answer 1

Hello John. The InfiniteRule Lock #IR66FR is the best lock option for the Demco Channel Tongue Trailer Coupler #DM15945. This lock was made specifically for the Demco eZ-Latch couplers, so it will work great for you. To answer your second question,…

view full answer...

Answer 2

Hey John, thanks for reaching out. You will want to use some 1/2" grade 5 bolts and locknuts for mounting the Demco Channel Tongue Trailer Coupler #DM15945. Since the current coupler uses only 2 bolts, you will be fine to use two bolts with the…

view full answer...

Answer 3

The Trailer Valet JXS Trailer Jack #TV34FR will come already lubricated. It is recommend to grease the internal gear system every 90 days.

view full answer...

Answer 4

To determine the correct jack capacity for your boat trailer, you will need to know the tongue weight of the trailer. Once the tongue weight is known you can select a jack with a lift capacity that is equal to or greater than the tongue weight of…

view full answer...

Answer 5

There is no wheel add-on specifically for the Trailer Valet JXS Trailer Jack part #TV34FR but there is a similar version of this jack with wheel, the Trailer Valet 5X Swivel Jack and Trailer Mover part #STC-V211 which is what I recommend using. This…

view full answer...

Answer 6

Thanks for the photo of your trailer coupler. That really helps explain what you are asking about. I spoke with a couple of other Experts and we may have a couple options you can consider. One way to go is to use Loctite Threadlocker 262, part…

view full answer...

Answer 7

The travel of the Swivel Marine Trailer Jack with Caster Wheel part #DL67MR is 10" per the technical drawing from Dutton-Lainson which I have attached below.

view full answer...

Answer 8

I spoke with my contact in the Tech Services department at Fulton, who explained that Aluminum trailer frames have a greater wall thickness than a steel frame. The bolts that attach the hinge to the trailer frame have a large diameter shoulder which…

view full answer...

Answer 9

Dutton-Lainson jacks are manufactured right here in the US and are actually really good quality. The mount used by your current Dutton-Lainson jack wouldn't be compatible with the Fulton F2, which leaves you with a couple of options. You could…

view full answer...

Answer 10

Your tongue weight is going to be 10-15% of your trailer weight. With a 5,000 lb boat and assuming a tandem axle trailer weighing an average of 1,000 lbs that puts you at 600-900 lbs of tongue weight. This would allow you to use the Fulton Bolt-Thru…

view full answer...

Answer 11

We have just what you are looking for. I recommend the Fulton F2 Swing-Up Trailer Jack #F1413140334. This jack is designed to work with frames up to 5 inches and it has the swivel feature and a wide-track wheel. This jack has a 1,600 lb capacity.

view full answer...

Answer 12

I'd recommend using a jack specifically designed for uneven terrain, like the ARK off-road swing up trailer jack, part #ORJW350D. The jack is rated for up to 770 lbs of tongue weight, and features dual wheels for easy maneuvering in all types of…

view full answer...

What Frame Dimensions Does Trailer Valet JXS part # TV34FR Fit

Continue Researching