Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Soft sand, gravel driveways, and muddy campsites don’t stand a chance against the Ark Xtreme Off-Road Tube Mount Swivel Trailer Jack. The dual 8" diameter by 2" wide rubber tires keep traction when the ground gets loose, rolling smoothly over uneven surfaces without flat spots or drag. Sealed bearings help the wheels stay in line and prevent wobble over time. Whether you’re pushing the trailer into storage or hitching up on a slope, the tread and stability of this setup make it easy.
Nobody wants to waste time spinning a jack endlessly just to reach the ground. The Ark Xtreme’s quick-release handle drops the jack tube fast into one of four positions, cutting down the amount of cranking needed. The magnetic removable crank handle attaches solidly to the jack and stores out of the way when not in use. With 10" of screw travel and 7-11/16" of drop leg travel for a total lift of 17-11/16", you get the reach you need without the struggle.
The square steel body on this jack limits play between the tubes and increases side-load strength. Precision-machined fittings and anti-rattle pins keep it steady during operation or travel. It’s built to handle 1,650 lbs static load and 1,100 lbs dynamic load, so you can move and lift with confidence. The zinc finish and black powder coat provide corrosion resistance with a 600-hour salt spray rating, and a built-in grease zerk keeps the internal screw running smoothly.
When it’s time to roll out, just pull the pin to swivel the jack parallel with the tongue or remove it entirely. The reinforced tube-mount bracket bolts around trailer frames 3" to 6" tall, and it’s compatible with most 2-1/2" outer diameter tube mounts already welded in place. The five-position yoke lock holds the wheels where you want them—upright for ground clearance or tucked down for storage. For extra peace of mind, you can use a 5/8" hitch pin lock (sold separately) to secure the jack.
This jack was built tough to handle off-road use and years of weather. The premium materials and finish keep rust at bay, and the sturdy square design resists bending and chatter. Reviewers who’ve used it long-term say it’s smooth, stable, and far stronger than cheaper jacks they’ve owned. It’s the kind of gear that feels solid from the first turn of the handle—made for real work, not just the driveway.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Great quality
Solid product. Worth spending the money to get a great Jack versus the cheap ones that are out there.
Very sturdy and smooth function. MUCH better than the previous two competitors products. Glad I found this one
I really am impressed with the quality and durability! Made in the USA is huge for me and I highly recommend this jack.
This is a rugged product that allows me to move my teardrop trailer around on flat ground.
This Jack is exactly what I needed. Great product. Shipping was fast.
Heavy Duty. Better than the 500 which failed to hold up due to the latch on rough roads and can't be removed from trailer. Like that I can remove from off road trailer and store in truck and easily reinstall.
Great product. Great customer service follow up. They actually waited a year to ask me to review. Will buy from them again!
This is the 3rd one I purchased. The company still included bolts that are too short. All 3 trailers I have put the on take 4.5” bolts so I had to go buy new bolts. Trailers must be different where these are mfg. This new model has changed how you rotate the wheels up. I am not sure if I prefer the old release or the new one but the new release makes the unit easier to install.
One year after my purchase of an Ark hitch jack for my overland camper Ii am happy to report that everything is performing perfectly.
This thing is really heavy. I would have been worried about the added tongue weight, but something else made that moot. The company that made the trailer put the VIN sticker right where this thing needs to go, and I was worried about the clamping force and accidental slippage causing damage to the sticker. So this thing just takes up space in my garage.
The welds on Both pins that connect the wheel assembly to the clamp cracked and the pins bent…..on a 3500 lb trailer…..thought I bought heavy duty. Now I cannot put wheel down without trying to put pins in place - which, of course, weakens them. I don’t expect they’ll last - looking to get someone to weld them again, but the placement needs to be perfect. Very disappointed.
Replaced my stock jack after I, ahem, sorta ruined it. But, boy am I glad I got this one. So much sturdier and easier to use. It was an unfortunate-fortunate accident that ruined my stock jack. This one really does a great job and is just easier to raise and lower our overland trailer. At first I wasn’t sure I was going to like the removable (magnetic) cranking handle, but I actually like it more than a permanently affixed one. For one thing, it does make it a little harder for someone if they wanted to try and steal the trailer. Of course a lock helps with that as well, but it’s just one more deterrent.
I’ve loved the product so far. A year later it still feels and performs like a high quality piece of equipment.
Very sturdy and makes it easy to move our Patriot Camper Gen 2 X3 around in camp or in the garage. Infinitely better than the cheap one Patriot provided with the camper.Very well made trailer jack. Worth the price
I am very impressed and satisfied with it. the quality of the jack and ease of use
Ray T.
12/5/2025
Excellent, very well built
this is my 2nd XO jack that has failed on me. The 2 pins that prevent the jack from rotating have small spot welds that broke. This failure would allow the jack to collapse. Why they do not have proper full welds is unclear to me given the cost of this product. They offered to RMA it but at my expense to ship back to them which was far more expensive than having a local welder fix it.
Jenny N.
6/20/2023
I reached out to ARK about the concerns with the jack. What I found is that the spot welds that you are seeing will not affect the integrity of the jack. The pins that are spot welded on only assist to keep the trailer jack from tilting slightly. The jack will function normally without the pins. The main way that the jack is secured is the central tube that carries all the weight and had a weld process that covers the entire 360 degree tube to the bracket.
Very solid product. Installation was easy. I haven’t had a chance to use it yet, but I got a strong feeling it’s gonna be great.
I have a tandem axle ALUMA trailer. The trailer is lightweight and can be moved without a vehicle. This jack allows me to move the trailer into storage, or align it behind my vehicle. The jack is easy to install and very sturdy. Excellent product. Worth every penny. LOVE IT.
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brent
8/29/2025
I can’t tell you how much easier life is moving this 5,000 lb trailer. I can move it with a golf cart now. You know it is high quality from the moment you pick it up - it’s heavy. The disconnect feature is convenient. It slightly misaligns to my trailer frame, but some shims solved the issue. Glad I got a reminder to rate this product… excellent purchase.