Recommended Wide-Track Single Wheel Jack For Trailer With 5-Inch Frame

Question

Question:

Does the fulton wide track singe wheel have a 5 inch swivel bracket to fit a 5 inch trailer frame??

asked by: Jodie L

0

Expert Reply:

We have just what you are looking for.

I recommend the Fulton F2 Swing-Up Trailer Jack # F1413140334. This jack is designed to work with frames up to 5 inches and it has the swivel feature and a wide-track wheel. This jack has a 1,600 lb capacity.

expert reply by: Jeffrey L

0

Answer 1

Hello John. The InfiniteRule Lock #IR66FR is the best lock option for the Demco Channel Tongue Trailer Coupler #DM15945. This lock was made specifically for the Demco eZ-Latch couplers, so it will work great for you. To answer your second question,…

view full answer...

Answer 2

Hey John, thanks for reaching out. You will want to use some 1/2" grade 5 bolts and locknuts for mounting the Demco Channel Tongue Trailer Coupler #DM15945. Since the current coupler uses only 2 bolts, you will be fine to use two bolts with the…

view full answer...

Answer 3

Good to hear from you again, John. For your 2990 lb GVWR trailer, the 770 lb capacity Ark Xtreme Off-Road Swivel Trailer Jack #ORJW350D jack will be more than sufficient. The total tongue weight is generally about 10-%-15% of the total trailer…

view full answer...

Answer 4

To determine the correct jack capacity for your boat trailer, you will need to know the tongue weight of the trailer. Once the tongue weight is known you can select a jack with a lift capacity that is equal to or greater than the tongue weight of…

view full answer...

Answer 5

Dutton-Lainson jacks are manufactured right here in the US and are actually really good quality. The mount used by your current Dutton-Lainson jack wouldn't be compatible with the Fulton F2, which leaves you with a couple of options. You could…

view full answer...

Answer 6

I'd recommend using a jack specifically designed for uneven terrain, like the ARK off-road swing up trailer jack, part #ORJW350D. The jack is rated for up to 770 lbs of tongue weight, and features dual wheels for easy maneuvering in all types of…

view full answer...

Answer 7

Stainless steel fasteners are going to be a much better option for securing a Trailer Tongue Toolbox #350970 to the front of your trailer. Galvanized are going to be able to wear through the coating and begin to corrode while stainless is throughout…

view full answer...

Answer 8

Your tongue weight is going to be 10-15% of your trailer weight. With a 5,000 lb boat and assuming a tandem axle trailer weighing an average of 1,000 lbs that puts you at 600-900 lbs of tongue weight. This would allow you to use the Fulton Bolt-Thru…

view full answer...

Answer 9

The travel of the Swivel Marine Trailer Jack with Caster Wheel part #DL67MR is 10" per the technical drawing from Dutton-Lainson which I have attached below.

view full answer...

Answer 10

I wish there was such an adapter, but there is not any sort of adapter to allow a trailer jack like the Fulton F2 #F1413140334 you purchased to be bolted on to your trailer frame since it is 6" tall. Your only option will be drilling holes and…

view full answer...

Answer 11

I spoke with my contact in the Tech Services department at Fulton, who explained that Aluminum trailer frames have a greater wall thickness than a steel frame. The bolts that attach the hinge to the trailer frame have a large diameter shoulder which…

view full answer...

Answer 12

Thanks for the photo of your trailer coupler. That really helps explain what you are asking about. I spoke with a couple of other Experts and we may have a couple options you can consider. One way to go is to use Loctite Threadlocker 262, part…

view full answer...

Recommended Wide-Track Single Wheel Jack For Trailer With 5-Inch Frame

Continue Researching