In-Depth Review of the Ark Xtreme Off-Road Tube Mount Swivel Trailer Jack- Sidewind Video

Hey Rich, that is a really good question. The short answer is, no, you do not need to go relocate your jack. According to the manufacturer, mounting the jack on the middle rail allows it to more evenly distribute the weight of the trailer, making…

If you like the Trailer Valet XL Trailer Dolly with Chain Drive part #TVXL2 but it's out of your budget then you may be interested in Trailer Valet 5X Swivel Jack and Trailer Mover part #STC-V211 which is a jack and dolly combo but has a…

I got my hands on the Removable Xtreme Off-Road Swing-Up Trailer Jack #ARK47FR and was able to determine that it can accept a 2" outer diameter tube inside the mounting tube and has a 5/8" diameter retention pin. If you remove the current…

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

Hey there Gary, thanks for the photo and yes the etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8" Swivel Pin #e52JR will indeed work with your Round, Pipe Mount Swivel Jack #TJP-5001S-B.

Looks like you're running the Kenda KR25 Radial Trailer Tire with 12" Aluminum HWT Wheel #AM31208HWT - thanks for the photo! The tire is rated for 1,220 lbs at 65 psi so I can definitely see why you're experiencing bounce. You can…

From the ground to the middle of the mounting bracket for the Extreme Off-Road Swing-Up Jack w/ Dual Wheels #ORJW500D measures 710mm (27.95") when you have it set at the highest setting. This jack gives us the ability to extend the leg using the…

I will start by saying the ARK Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU will fit frames that are 2" to 6" tall. The bolt hole measurements vary and I included a diagram with everything listed, but the overall dimensions of…

The Removable Extreme Off-Road Swing-Up Trailer Jack - Dual Wheel - Sidewind - 10" Lift - 1,650 lbs item #ARK57FR you were looking at is the ORJW750T model of Ark jacks. The jacks mounting tube has a 2" inner diameter and a 2-1/2"…

Yes you are correct. The outer diameter of the Removable Xtreme Off-Road Swing-Up Trailer Jack #ARK57FR is 2 1/2" and the inner diameter is 2.

As long as a qualified welder is used, a Safety Chain Attachment Loop like part #E950 could be welded to the receiver as shown in the photo I provided. Having an amateur welder weld it could result in the hitch being weakened. This would be the best…

I would be happy to help you with those measurements for the Ark Removable Extreme Off-Road Swing-Up Trailer Jack item #ARK57FR. It is a standard fitting so unless your trailer has something custom added to it, it should fit. The Ark jack will fit a…