Replacement Scissor Step Bracket for Brophy Scissor Steps

Question

Question:

Brophy sent me to you. I have one of their expanding scissors type steps for our camper. It 16 inches wide and I need the bracket that’s on the back of our camper that holds it. Brophy says the part number is 2001. Do you have one? Thank you

asked by: Chuck J

0

Expert Reply:

We do carry the Replacement Scissor Step Bracket # CR2001 (this is the Brophy part 2001). However, this is for 18" steps.

We do not have a bracket that is for the 16" step. If Brophy told you that you needed the # CR2001, we would default to their recommendation.

expert reply by: Scott S

0

Answer 1

We do offer mounting brackets for scissor steps. I have attached a photo of the Replacement Scissor Step Bracket for 18 inch steps, part #CR2001. You can check out the bracket to see if this is the style you need for mounting your scissor steps. This…

view full answer...

Answer 2

From the base of the bracket #CR2001 to the top of the hook measures 1-3/4 inches and measured from the mounting hole centers to the top of the hook measures 1 inch.

view full answer...

Answer 3

The distance between the two hanger hooks of the bracket part #AS2002 that you referenced is 17-7/16".

view full answer...

Answer 4

What you're going to want instead is the: -Brophy Tailgate Scissor Step Mounting Bracket #TSSB. This mounting bracket will work with your AS04 scissor steps, as well as the AS02, AS03, AS05, AS23, AS24, AS25, SS02, SS03, and SS04 steps. The…

view full answer...

Answer 5

Yes we do, the correct replacement mounting bracket for the #SS04 is the part #AS2002.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Replacement Scissor Step Bracket for Brophy Scissor Steps

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching