bing tracking image
  1. Trailer Hitch
  2. TorkLift
  3. 2 Inch Hitch
  4. Class V
  5. 17000 lbs GTW
  6. Visible Cross Tube
FITS 2001 Ford Excursion
TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift

TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers

Part Number: TLF1006
In Stock
$803.04
Retail:$1,011.98
You Save: $208.94
Trailer Hitch
Confirmed to Fit
2001 Ford Excursion

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions. Great Prices for the best trailer hitch from TorkLift. TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers part number TLF1006 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (23)
  • Q & A (0)
  • Photos

2001 Ford Excursion - TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers

Highlights

  • Designed to Fit Your 2001 Ford Excursion: Mounts to existing attachment points
  • Dual 2" Receivers: Tow a trailer and use a bike rack or cargo carrier at the same time
  • Handles up to 17,000 lbs (GTW) / 1,700 lbs (TW): Heavy-duty Class V strength for large loads
  • Weight Distribution Ready: Boosts capacity to 20,000 lbs (GTW) and 2,000 lbs (TW) when used with WD
  • Bolt-On Installation: Mounts securely without welding for a strong, custom fit
  • Corrosion-Resistant Finish: Black powder coat protects sturdy steel construction over time
Made in USA

Features to know about

Tow Heavy and Haul More Gear: Dual 2" Receivers with Class V Strength

The TorkLift SuperHitch Original packs serious muscle with dual, vertically stacked 2" receivers and Class V power. It’s rated for 17,000 lbs gross trailer weight and 1,700 lbs tongue weight, or up to 20,000 lbs GTW and 2,000 lbs TW when used with weight distribution. You can tow a trailer while carrying a bike rack or cargo carrier at the same time without sacrificing strength or stability. The high-capacity design keeps your setup steady whether you’re hauling equipment for work or loading up for a trip.

Keep Your Camper Setup Ready: Pre-Drilled for Tie-Downs and SuperTruss Extensions

If you run a truck camper setup, this hitch makes life easier. It’s pre-drilled to accept TorkLift camper tie-downs and works with the SuperTruss extension system to clear your bed-mounted camper while maintaining heavy towing capacity. Even with long extensions—up to 60"—this system can hold up to a 10,000-lb limit using weight distribution. That means you can keep your camper loaded and still tow your trailer safely without weak adapters that cut down capacity.

Truck with bed-mounted camper using TorkLift SuperHitch and SuperTruss extension to tow a trailer, showing clearance provided by dual-receiver hitch system.

Built to Last Through Hard Use: Reinforced Steel Construction with Corrosion Protection

This hitch is built from sturdy steel with high-penetration, dual-shield welds that hold up under tough conditions. The hardened, reinforced hitch pin holes prevent wear over time, and the black powder coat finish fights rust and corrosion. Safety chain loops are built in, and two hitch pins with clips come included so you can get set up right away. It’s a solid foundation for anyone who expects durability and real towing performance that lasts.

Specs

Receiver Specifications

  • Receiver openings: 2" x 2"
  • Rating: Class V

Technical diagram of TorkLift SuperHitch Original showing dual stacked 2-inch receivers, reinforced structure, and key component callouts.

Weight and Capacity

  • Maximum gross trailer weight: 17,000 lbs
  • Maximum GTW when used with weight distribution: 20,000 lbs
  • Maximum tongue weight: 1,700 lbs
  • Maximum TW when used with weight distribution: 2,000 lbs

Dimensions

  • Cross tube dimensions: 3-1/2" x 3-1/2"

Warranty

  • Lifetime warranty

F1006 Tork Lift Original Super Hitch with 2 Receivers



Customer Satisfaction Score:

Ratings & Reviews

4.8

23 reviews
Review sort icon
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.

by:



by:



by:



by:



by:

Box was a little beat up, but looks like all the pieces are there.



by:

Excellent hitch



by:

Just what I was looking for, it's larger and heavy duty even the chain holes are double plated. I'm very excited to install and put it to work. I am very happy with the whole setup.



by:

Nice looking unit. Starting to see surface rust over entire hitch.



by:

Absolutely Love the hitch. Built extremely well. Would definitely buy again.



by:

Item arrived before estimated time and in perfect condition. Old hitch broke and bought this as a replacement. Better than factory by far.



by:

I love this hitch. The only think that could be improved on is the profile of the plug frame. I'm not sure how, but is seems to hang lower than necessary.



by:

Excellent customer service, excellent install instructions.
I have used this for not only towing, but also stump removal (as well as chain breaking service) and it has not disappointed.



by:

Product is the best I’ve seen ...but....

I
would say the directions lack some important information..... when undoing the old hitch they neglect to tell you that the factory nut plates can puncture a hole in the fuel tank unless you remove bolts in a certain order... so I punctured a hole in mine ... also the new hitch makes retightening the fuel tank bolts very difficult.... with this said the hitch itself is great !



by:

Better than the stock receiver by far. Stock one rusted out and need to replace it. We tow a 12k lbs. Toyhauler with our Excursion. This works great!

Matt C. profile picture

Matt C.

6/21/2017

Still a great product.



by:

It rocks I have an 11k weight 38 foot travel trailer no issues. The extra bulk steel around the hitch pin holes really help prevent rounding out pin movement.



by:

Great hitch for my Excursion!
Far superior
to the factory equipped hitch!!!

John profile picture

John

4/7/2023

Excellent product



by:

I am a repeat customer of etrailer.com. As always the customer service they provide is top notch. They also offer some of the best prices around. This hitch is a special order item and an etrailer customer rep was in constant contact with me. She provided me with updates and ETAs on my special order. As far as the hitch goes its also a great product. Torklift also has great customer service. I have used Torklift hitches before and they are very well made and very sturdy. They provide a massive tongue load rating. Thats the most often overloaded weight on a hitch.



by:

Love the trailer double hitch. The only negative issue I had was the hardware should be grade 10.9. I have been a heavy equipment mechanic and all bolt on components should always come with gade 10.9 hardware. After I upgraded to the proper grade hardware before I installed the hitch is perfect. Also it did come with some chips on the powder coating but most likely due to shipping. It is what it is a little touch up epoxy primer did the trick to protect the metal where it was chipped.



by:

This Hitch is the best hitch I have ever purchased. Easy to install everything was included. If you looking for heavy duty an American made then you can't go wrong with this hitch.


Thank you Tammy D. for helping me.

Thanks again

Douglas V.

Douglas V. profile picture

Douglas V.

6/9/2018

Great product other than the power coat paint. It’s rusting just like I said it would, whoever came up with powder coating should be fired.

Heather A. profile picture
Etrailer Expert

Heather A.

6/12/2018

Rocks and flying debris under the vehicle can sometimes cause scratches and dings in the powder coating of the hitch. Routinely check the hitch for scratches and immediately spray paint any bare metal areas with a black spray paint such as rustoleum to prevent rust. Also, periodically washing the hitch off with fresh water will prevent corrosion from salt exposure. I have attached a link about rust prevention.


by:

It was a project for sure. With limited access due to large fuel tank, and have to drill out two of the factory bolts it took much longer than anticipated. I considered not using both fender washers as directed, and wanted to loctite all bolts. I dislike the supplied 7-pin mount, seems to place connector far too low. I'm still looking for a solution, and may re-use factory part. Hitch is an amazing piece once installed. Ford dealer quoted me $125 to install, once I was finished I wish I had taken them up on the that deal!

David profile picture

David

6/17/2019

One year later and this amazing receiver is still as good as the day it was installed. It does hang lower than the factory hitch it replaced, but it hasnt been an issue. I reused the OEM 7-pin mount after some clean up and a respray. I used stainless steel pipe clamps from the local home improvement retailer to secure to the hitch. It fits nicely under the bumper and is well protected.



by:

Holy cow this is an amazing hitch! It fit perfectly on my 2001 Ford excursion diesel 4X4. The bolt wire fishing tool easily solved the problem of accessibility with the huge factory 45 gallon diesel tank in the way. I couldn’t believe how easy this install was. And it has a ton of ground clearance and the top receiver is almost exactly where the factory receiver hole would be.



by:

Fantastic instruction set, Heavy plate steel, perfect fit. Outstanding product.



by:

Torklift has been spectacular. It has performed flawlessly towing my Jeep around. The secondary receiver is great for the spare tire carrier.


23
23

See what our Experts say about this TorkLift Trailer Hitch

  • Recommended Factory Replacement Hitch for a 2000 Ford Excursion
    Thanks for the picture Jim! Yes, you'll definitely need to remove that 7-way and reinstall it. The Curt Hitch item # C14011 is custom fit for a 2000 Ford Excursion and it does not have any pre-drilled holes or slots to attach the 7-way. We did have a customer attach the factory 7-way to the Curt Hitch item # C14011. I have included the picture they sent in below. Why are you wanting to replace the factory hitch? You can add this information and any other questions you have where it says...
    view full answer...
  • Is There a Class V Trailer Hitch Receiver For a 2000 Ford Excursion With 2-1/2" Receiver?
    Our only custom fit trailer hitch receivers we have for your 2000 Ford Excursion are the Curt Class IV # C14011 and Torklift Class V # TLF1006. The Curt has one 2" receiver while the Torklift has two 2" receivers. We do have a Curt Class 5 Universal Weld-on Hitch # C37CR with a 2-1/2" receiver opening. This will need to be taken to a shop to have welded onto your frame. They may need to add additional structure to strengthen your frame.
    view full answer...
  • Long Ball Mount and Hitch Extension for 2000 Ford Excursion with Dual Rear-Mount Spare Tires
    The extra-long 2-inch ball mount we offer, part # EA40 from Brophy, is 15-3/4-inches long and may give you the clearance you need at your dual rear-mounted spare tires to let you use a friction sway control unit like # 83660 on a bracket # RP26003. If you measure from the center of your hitch pin hole rearward 15-3/4-inches that point will be where the center of the hitch ball hole will be. Do note however that this ball mount is rated for 6000-lbs gross trailer weight and 600-lbs tongue...
    view full answer...
    Image 1 for
  • Hardware Size Used to Install Curt # C14011 or Torklift # TLF1006 on 2000 Ford Excursion
    To see installation details for both hitches, click the provided links. The Curt # C14011 installs using 18mm bolts that use existing nut plates in your Excursion's frame. No drilling is required to completed the installation. The hitch has a 12,000 lb towing/1200 lb tongue weight capacity. The Torklift # TLF1006 installs using 1/2 inch and 5/8 inch hardware, and nuts. The existing nut plates are removed, so you'll need to remove the rear bumper to access the interior of the frame members...
    view full answer...
  • Curt Hitch C14011 Installation on 2001 Ford Excursion
    You will naturally be better off if your shop does NOT break off the factory weld nuts when removing the OEM hitch from the frame rails on your 2001 Excursion. Given the vehicle's age its quite likely that the bolts securing the OEM hitch will have some rust. Application of a solvent like PB Blaster or WD40 will help dissolve that accumulated corrosion and give them better odds of getting the hitch off without damage so that you can install either Curt hitch # C14011 or TorkLift # TLF1006. Both...
    view full answer...
  • Trailer Hitch and Wiring for a 2000 Ford Excursion
    The 2000 Ford Excursion is actually rated for 10,000 pounds gross trailer weight. The 18,000 pounds is the gross combined weight rating or GCWR. The GCWR is the most that the Excursion and trailer can weigh including cargo, passengers, and fuel. So the Excursion cannot tow 18,000 pounds and its weight plus the trailers weight cannot exceed 18,000 pounds. The trailer can weigh up to 10,000 pounds total but no more. With that said the highest capacity trailer hitch we have for your vehicle...
    view full answer...
  • Do Both Receivers On TorkLift Super Hitch TLF1006 Have The Same Weight Capacities?
    Both of the 2" receivers on the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers # TLF1006 have the same tongue weight rating of 1700lbs and trailer weight rating of 17000lbs, Or 2000lb tongue weight rating and 20000lb trailer weight rating if you are using a weight distribution hitch.
    view full answer...
  • High Capacity Trailer Hitch Recommendation for a 2005 Ford Excursion
    I have a very high capacity hitch I can recommend for your 2005 Ford Excursion, but the Curt part # C15410 is not it. Instead you would want the Torklift part # TLF1006 which is a confirmed fit and has a 1,700 lb tongue weight capacity and a 17,000 lb total trailer weight capacity.
    view full answer...
  • Charging Trailer Battery and Weight Distribution for 38 ft Primetime Lacrosse 3311RK
    Most people will trickle charge their trailer battery through the 12-volt accessory circuit of the 7-way trailer wiring connector. You'd basically just run a wire from the 1:00 pin of the 7-way to the positive terminal of the battery # BRW37FR and it would receive a trickle charge when you are towing. You'd want to use 10 gauge wire like the # 10-1-1 which we offer by the foot. If the tow vehicle side of this connection isn't made you'd can use 10 gauge wire for this as well but you'd also...
    view full answer...
  • Which TorkLift Super Hitch Trailer Hitch Receiver Fits A 2000 Ford Excursion?
    I have another option for you, but the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2" # TLD1109 you were looking at is only confirmed to fit select Ram Pickups and will not fit your 2000 Ford Excursion. Instead I recommend the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers # TLF1006 which is confirmed to fit your Excursion and has a 1700lb tongue weight rating and 17000lb trailer weight rating making it a...
    view full answer...
  • 2001 Ford Excursion Hitch That Offers More Than a 1,400 lb. Tongue Weight
    The TorkLift SuperHitch Original Trailer Hitch Receiver part # TLF1006 is designed to be a direct bolt on installation. It offers a 1,700 lb. tongue weight rating when used typically or 2,000 lbs. when used with weight distributionand will takes care of your needs.
    view full answer...
  • Do You Have a Recommended Kayak Rack for a 2001 Ford Excursion?
    I called my contacts at both Yakima and Thule, and they both advised against buying the Yakima Big Stack # Y04041 and the Thule Stacker # TH830 because of the 1/4 inch clearance under your factory crossbars on your 2001 Ford Excursion. The best way to go to guarantee a fit of the kayak carrier clamps to your vehicle is to purchase the Thule WingBar Evo Crossbars - Aluminum - Silver - 53" Long - Qty 2 # TH711400. With the crossbars, you will need: - Rapid Podium Feet for Thule Crossbars...
    view full answer...
  • Front Mount Trailer Hitch and Winch Mount for a 2005 Ford Excursion
    There are front mount hitches available for your 2005 Ford Excursion but TorkLift hitch # TLF1006 will not fit. The available front hitches that do fit are Draw-Tite hitch # 65022 and Curt hitch # 31114. Both are rated for 9,000 pounds line pull and 500 pounds vertical load. For a winch mount that fits in a 2-inch receiver we have: # C31010 # BDW20011 # BDW20155
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924