Result: leaf spring shackles

The internal length of u-bolts #SP01-160 is 5-3/4 inches so you would not subtract 9/16 inches from that length. The u-bolt plate #117594-G is 3/16 inches thick. The spring stack for #SP-040275 I just measured and it is 1-7/16 inches thick. Adding in…

It sounds like the U-Bolt Plate #TRTP200175 that you referenced could work for you as this plate is designed for use with 1-3/4 inch wide springs and the other measurements you listed are close. However, I would have you check out the picture I…

We sure do. U-Bolt Plate #117594-G is galvanized and attaches a 2 inch square axle to 1-3/4 inch wide leaf springs.

The bolt hole spacing for the CE Smith Front/Rear Hanger Bracket for Double-Eye Springs #CE14026G is 4-3/8" x 1-5/8". I've attached a dimensional photo for you to check out as well as a review video to reference.

A 5200 lb axle is actually a 6000 lb axle that's been de-rated by using a different outer bearing. The proper replacement leaf spring will depend on how long the original springs are. Because leaf springs flatten out and become longer as they…

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

It sounds like you may have the 3-Leaf Double-Eye Spring #e59SR on your trailer. This spring is 23-1/8" long from eye center to eye center when fully relaxed and has 3 leaves. As a leaf spring is loaded with weight it will get longer and…

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

Hello Steven, I do have a keyed alike option for you, but I am sorry I cannot add the keyed alike option to the Trimax. I checked on the Trimax website and did not see the UMAX100-KA on there, I only saw the UMAX100. Are you sure it was on the Trimax…

The shackle straps included in the Lippert Tandem Axle Equa-Flex AP Kit - Wet Bolts - 3-1/8" Long Shackles #LC64FR you mentioned are 3-1/8" center to center and 4-3/8" overall length as shown in included diagram. Using the longer…

We recommend having a minimum of 3" between the top of the tire and bottom of the fender in order to allow for proper suspension travel. However, based on the photo you sent I believe you need new leaf springs as the ones you have appear to be…

Hey Charles! We have no way of knowing what kind of lock is on your 2022 Holiday Rambler Vacationer 33C. Is there anything else on yours to identify it? If it is a Global Link MRL-41510-2006 or a Trimark 030-0900 without a linkage rod it is a direct…