Dimensions Of Shackle Bolt For Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00

Question

Question:

What is the length of 9/16 portion of the hanger bolts? Thanks

asked by: Ted S

0

Expert Reply:

The Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 uses the Shackle Bolt # 007-126-01. The 9/16" portion of this bolt is 2-1/4" long.

expert reply by: Bud M

0

Bolt Dimensions
(click to enlarge)

Answer 1

Hello Danny, For the single axle trailer, we do not have a wet bolt kit that has 2 5/8" Shackles. Is that your overall length, or center eye to center eye? The closest kit we we would have for the single axle would not have wet bolts, but it…

view full answer...

Answer 2

We can get you the right shackle kit for your single axle trailer with a Dexter 3,500 lb axle, and you can choose from either a standard kit or an upgrade kit. Either will work, though the Upgrade Kit is going to be the best option due to the fact it…

view full answer...

Answer 3

Hi Austin, I can help you determine the right replacement double-eye leaf springs for your 2018 Jayco trailer, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your…

view full answer...

Answer 4

Excellent question. There is no disadvantage to using a special trailer tire with a higher weight Load Range Rating than is required by your trailer's weight. Doing so simply means that those higher-rated tires will tend to run cooler, since they…

view full answer...

Answer 5

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 6

The biggest advantage and reason most people go with a larger trailer tire is the increased weight capacity that the larger tires offer. The larger diameter offers a negligible amount of better ride quality for the trailer since the larger the tire…

view full answer...

Answer 7

Hey Mike! Sounds like you're needing the Easy Grease Trailer Idler Hub Assembly for 2K Axles #AKIHUB-545-2-EZ-2K. If you're wanting something with a better protective coating the Galvanized Hub #AKIHUB-545-2-G-EZ-2K will do the trick, but…

view full answer...

Answer 8

The threaded portion of the bolts of the #K71-403-00 are 7/16 inch but the stepped up diameter is 9/16 inch. The shackle length is 3-1/8 inch from hole center to hole center. The bolt length is 2-7/8 inches. We can't help much with the axle…

view full answer...

Answer 9

The shackle straps included in the Lippert Tandem Axle Equa-Flex AP Kit - Wet Bolts - 3-1/8" Long Shackles #LC64FR you mentioned are 3-1/8" center to center and 4-3/8" overall length as shown in included diagram. Using the longer…

view full answer...

Answer 10

Trailer manufacturers don't usually keep a record of parts like these that they install at the factory, so I cannot be sure as to the exact length of the shackle strap that would have come originally on your trailer. With this in mind, a 3-1/8…

view full answer...

Answer 11

If your current axle has 89" hub face and 74" spring center measurements then yes, the Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern #e72GR can be used as a replacement but you'll also need to swap out your…

view full answer...

Answer 12

Hey Duncan, a 26 inch long leaf spring would be the way to go like the part #e22YR that you referenced. Springs do tend to stretch out and flatten once worn out so going with a new one that measures a bit shorter is the way to go. To pick out…

view full answer...

Dimensions Of Shackle Bolt For Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching