Compatibility Of Dexter DX EOH Disc Brake Actuator With Hydrastar HBA-CAM OEM Adapter Module

Question

Question:

Am I able to use a HBA-Cam Module with a Dexter DX 1600psi EOH Actuator?

asked by: Alan B

0

Expert Reply:

Yes, you can use the HydraStar Electric Over Hydraulic Actuator Adapter Module # HBA-CAM with the Dexter DX Series Electric Over Hydraulic Disc Brake Actuator # K71-651. In my experience I find the Hydrastar HBA-CAM is the most reliable module with the least issues during use.

expert reply by: Bud M

0

Answer 1

For a brake controller I would recommend the Prodigy P3 Brake Controller part #90195 for basically every towing situation but especially for an electric over hydraulic setup like what you have. This is our best selling brake controller because of how…

view full answer...

Answer 2

The Grease Seal - Double Lip - 2.250" ID - 3.376" OD #GS-2250DL and Grease Seals 10-36 (pair) #RG06-070 have the same exact measurements of 2.250" inside diameter and 3.376" outside diameter so they will work for the same…

view full answer...

Answer 3

There are actually two ways that 7-way wiring colors are commonly seen. One uses a red wire and the other a purple. The circuits they represent do vary though. So check out the updated diagram I attached to this page and most likely you need to wire…

view full answer...

Answer 4

Does your trailer have solar panels? We've heard of this issue and and it appears there is a tech bulletin out about how the solar panel kits on trailers make the truck have this issue and disconnecting helps. The tech bulletin is 23-NA-113 and…

view full answer...

Answer 5

It is possible that we can offer you an adapter which will allow the factory brake controller on your 2018 Chevy 2500 to work with electric-over-hydraulic brakes. This is a known issue for the 2018 chevy trucks. We will need to know specifically what…

view full answer...

Answer 6

The truth of the matter is that there simply isn't an electric over hydraulic brake actuator that is going to work well with the factory brake controller in your 2013 Chevy Silverado because those controllers were designed for electric brakes…

view full answer...

Answer 7

William yes, I can confirm that the Curt T-Connector Vehicle Wiring Harness #C88RV is what you'd need for your 2025 Chevrolet Equinox. If you're needing help with anything else, feel free to drop a comment before you go!

view full answer...

Answer 8

Yes, the Adapter Module #DX35FR is the part you need. This will allow you to use the factory trailer brake controller on your 2020 GMC Sierra 3500 with the Dexter DX Series Electric Over Hydraulic Brake Actuator #K71-651 on your 5th wheel. The Module…

view full answer...

Answer 9

Wiring connections for the Electric Over Hydraulic Brake Actuator are as follows. Yellow - Cold side of breakaway switch, The wire that goes hot when a breakaway occurs. Black - Positive connection on breakaway switch, The wire that charges the…

view full answer...

Answer 10

You will want The HydraStar Control Adapter Module #HBA-CAM, to use your Hydrastar #HBA-16 unit with the factory integrated brake controller on your 2020 Chevrolet Silverado 3500. The factory brake controllers on 2007 and up GM trucks are not…

view full answer...

Answer 11

What brake controller does your truck have? Typically the OEM integrated brake controllers in newer trucks can be a little problematic but the aftermarket ones like the P2 part #90885 work consistently really well. It's pretty common to see the…

view full answer...

Answer 12

The Dexter electric over hydraulic actuator does not have its own adapter for use with the integrated controller on your truck. Titan BrakeRite EHB Adapter for Ford/Chevy Integral Brake Controllers, part #T4846000, will only work with the Titan…

view full answer...

Compatibility Of Dexter DX EOH Disc Brake Actuator With Hydrastar HBA-CAM OEM Adapter Module

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching