Parts Needed to Install 7-Way and Brake Controller in 2019 Kia Sorento
Updated 03/21/2022 | Published 03/19/2022
Products Featured in This Question
Question:
I have a 2019 Kia Sorento EX that I need to install a 7 blade plug harness on. It currently has no trailer wiring or hitch. Ill be pulling a camper with brakes. All I see listed are 4 flat harnesses. Is there products you offer that I can use to outfit the car correctly? I also noticed many towing part listed all trim packages except the EX. Any help would be greatly appreciated. Thank you for your time.
asked by: Ryan M
Expert Reply:
We can help you install a 7-way and brake controller in your 2019 Kia Sorento but you do need to first start with a 4-way like the part # C56256 and then convert it to a 7-way with the part # ETBC7 so that you can install a brake controller like the Brake EVN # TK63VR. This comes with everything needed to convert to the correct connector and wire up a brake controller. For a trailer hitch then the etrailer # e98843 would be a great option.
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: RV Exterior Lighting
- Shop: Trailer Wiring
- Q&A: Replacement 2,000 Pound Axle With 5 on 4-1/2 Bolt Pattern For Bear Trailer
- Q&A: How To Protect Your EcoHitch Hidden trailer Hitch Receiver From Rusting
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: How to Determine Tire/Wheel Diameter
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Rust Prevention
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure for Trailer Hitch Drop
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Red Identification Light Bar with White LED Utility Light - 17 Diodes - 15-1/2" x 1"
- Shop: Optronics LED RV Step Area Light - 5 Diodes - Aluminum Housing - Clear Lens - 12V/24V
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Optronics ThinLine LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 11 Diodes - Clear Lens
- Q&A: Recommended 2,000 lbs Axle w/ Idle Hubs That Have a 5 on 4-1/2 Bolt
- Q&A: How to Choose Replacement Axle for Lowe's 5x8 Trailer
- Q&A: 72" Hub Face Trailer Axle With 60" Spring Center and Idler Hubs
- Q&A: Looking for Replacement 5 Lug Hub with Bearings L44649 Pre Greased
- Q&A: Axle Upgrade For Ironton 5 X 8 Utility Trailer