Replacement Axle For 84 Inch 3,500 Pound Dexter Axle
Updated 03/07/2022 | Published 03/04/2022
Products Featured in This Question
Question:
Looking for a 3500 axle and hub assemblies. I have a picture of the axle tag. Dexter D35 HB370S HF84 SC70
asked by: James O
Expert Reply:
Based on the information you have given me, you have a 3,500 lb axle that is 84" long (hub face to hub face) with a 70" spring center length. At this time we do not have any replacement axles that are 84" long, but I do have a solution. I recommend using the Timbren Axle-Less Trailer Suspension System w Hubs - Straight Spindle - 5 on 4-1/2 # A35RS545.
The Timbren system will fit any frame width so there is no need to worry about matching your current axle length. It is a complete suspension system so this will replace your leaf springs as well. If you are looking for a hub and drum assembly with brakes, the # A35RS545E is also an option.
If you are looking for a bolt pattern other than 5 on 4-1/2 then you would need the # ASR3500S05 instead. This uses inner bearing # L68149 and outer bearing # L44649 so you would need to choose hubs that match these bearings with a 3,500 lb capacity.
I have attached a review video long with a link to all of our hub and drum assemblies that use these bearings for your reference.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
- Video: Feature Review Dexter Single Axle Heavy Duty Suspension Kit
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 2K Trailer Axles - 20-3/8" Long - Dacromet
- Shop: CE Smith Frame Straps - 2-1/2" Hole to Hole Length - Galvanized Steel - Qty 1
- Search Results: trailer suspension kit
- Search Results: trailer shackle
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/4" - Dacromet
- Video: Review of CE Smith Trailer Suspension Parts - Spring Seat Typical 3500lb Trailer Axle - CES88WR
- Shop: 2-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood
- Search Results: static/images/styles/checksvg
- Search Results: galvanized trailer springs
- Search Results: torx screws
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Search Results: 84 axle
- Video: The Low-Down on the etrailer Rust-Resistant 4-Leaf Double Eye Spring for 5K Trailer Axles
- Q&A: Recommendation For Screws To Attach Pressure Treated Decking To a Flat Trailer
- Q&A: Recommended Screws For Plywood Deck on Snowmobile
- Q&A: 3,500 lb Dexter Axle Trailer Hub Recommendation for Marine Use
- Video: What to Know About the etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles
- Video: Checking Out the etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles
- Video: Redline Tie Down Anchors TFX250ACQ Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Solution for Trailer Drop Axle that Blocks Brake Adjustement Star
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Lookiing To Upgrade Axles On 2015 Keystone Cougar 33RBK
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Axles
