Is There a 4" Bumper Mounted Spare Tire Carrier for Dually Wheels

Question

Question:

Okay I have a 4-in by 4 in RV bumper and I want to put my dually spare tire on the bumper . My truck as a super duty Ford 350 so will I hold the spare tire for my truck Thank you

asked by: Donna A

0

Expert Reply:

I do have an option for you but the bumper mounted spare tire carriers are not made for vehicle/motorhome wheels, they are for trailer wheels. The problem with the vehicle/motorhome wheels is that the bolt pattern is usually too large and they tend to weigh more than trailer wheels The best option we offer for vehicle/motorhome wheels is the Roadmaster Hitch Mounted Spare Tire Carrier part # RM-195225 which mounts to the trailer hitch.

expert reply by: Conner L

0

Answer 1

You would measure the overall width of the trim so if it is 1 inch on the trailer now then you would want to use 1 inch trim such as #CAM25222. The good thing about this is that even if something occurred and it turns out you need 3/4 you could trim…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hey Ken, welcome back. There's no specific bracket or support made to hold up the Replacement Crank Extension item #LC1315411 when it's connected to the Lippert Spare Tire Winch item #LC159056. You'll need to fabricate some kind of…

view full answer...

Answer 8

The Roadmaster Hitch Mounted Spare Tire Carrier part #RM-195225 will work great with a bike rack but you'll need to keep a few things in mind with weight being the biggest. The carrier alone reduces hitch capacity by 33% or 1/3. You must also…

view full answer...

Answer 9

Hi Justin, that's a great question. The part numbers can definitely be confusing. The TorkLift StableLoad Suspension Upgrade, Part #TL89CR, is the same kit as TorkLift's Part A7312S (I wasn't able to find a A7312A) for a 2017 Ford F-350…

view full answer...

Answer 10

Hi Larry, The part #SU29AR spare tire carrier is compatible with 5x160, 6x180, 6x120 wheel bolt patterns. It mounts through the factory rear door hinge locations into the reinforced door structure, so there's no need to remove or realign the door…

view full answer...

Answer 11

Hey Connie, thanks for reaching out. My first thought here was to use a hitch mounted spare tire carrier like part #e98ZR, but in all likelihood, the bike rack on your rear door would interfere with the tire carrier, so that probably isn't the…

view full answer...

Answer 12

Hey David, the Roadmaster Spare Tire Mount part #RM-195225 that you referenced would be a really great option for you. This will be able to carry the spare you have and also has a hitch opening behind it for your tow bar so that you can continue to…

view full answer...

Is There a 4" Bumper Mounted Spare Tire Carrier for Dually Wheels

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching