bing tracking image
Q & A Icon

How Cand I Use the Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights with My 1" D-Rings?  

Updated 08/12/2026 | Published 08/07/2026

Question:

I received my Nighthawk tow bar and realized it doesnt have a forked end where the pins slide in. It wont hook up to my jeep like this. What do I need to do? thanks

0

Expert Reply:

Hello Nick,

Thanks for finally finding a reason to write in to us!

I am pretty sure I figured out what the issue is. You recently ordered the Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights - Non-Binding - RV Mount - 8,000 lbs # RM-676, but I see that back in 2020 you ordered the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1.

Do you still have the same Jeep with the same bumper? If so, you will need to transfer the # RM-035-1 over to the new # RM-676. If you no longer have the # RM-035-1, you will need to purchase a new set so you can hook up to your 1" D-rings. I attached an image for reference so you can see exactly what it looks like when everything is hooked up.

Getting things geared up for one final summer adventure? Where are you headed next?

expert reply by:
0
Kate F
Roadmaster Nighthawk Hooked to D-Rings
Roadmaster Nighthawk Hooked to D-Rings
(click to enlarge)
Dan H. profile picture

Dan H.

8/12/2026

Etrailer has the solution for you. Just call them and ask.

Kate F. profile picture
Etrailer Expert

Kate F.

8/12/2026

@DanH Thanks for the shout out Dan, we do what we can =)
Gary S. profile picture

Gary S.

8/12/2026

Not sure what the issue is, sounds like a different bumper or jeep; however, I have always been a bit leery of using the bumper D-rings for towing. If you check behind the bumper you will find the only thing connecting the bumper to the jeep frame are two accordion-like sheet metal devices. It’s due to safety standards and crash absorbing bumpers. It seems a lot to ask of these devices to tolerate the constant tugging a pulling of the tow bar. Testimonials on the Jeep forum and other sources seem to bear this out with stories of jeeps being separated from the tow vehicle due to failure of these devices over the long term. A better solution might be a tow plate designed to fit your jeep. These plates bolt directly to the jeep frame thru already existing holes in the frame behind those accordion devices. If interested, I am sure e-trailer can help with fitment of Roadmaster, Curt, or other tow plates for your jeep. BTW excellent choice in the Roadmaster Nighthawk. I’ve had mine for a couple of years and several thousand miles of towing my JK behind my RV. Best wishes and keep on truckin’ or better yet, Jeepin’

Kate F. profile picture
Etrailer Expert

Kate F.

8/12/2026

@GaryS I agree with you Gary, and that’s a really important point to bring up. A frame-mounted base plate is a great option and takes the guesswork out of whether the factory or aftermarket bumper is suitable for flat towing. I would also add that if someone does want to flat tow using D-ring mounts, they need to verify that the bumper itself and the D-ring mounts are specifically rated by the manufacturer for flat towing. Not all bumpers or D-ring mounts are, regardless of how heavy-duty they may look. And I’m with you on the Nighthawk, it’s a great tow bar. Thanks for sharing your experience and happy Jeepin’!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>