Measuring the Width of Trim on a Trailer to Choose Replacement Roll of Trim

Question

Question:

I am needing to replace the vinyl trim on my trailer. The aluminum moulding measures 3/4inch in width track to track. However, when I measure the trim currently on the trailer, the trim is 1inch wide when laid flat. Do I need the 3/4inch trim on the 1inch trim? I will need a 100foot roll, white.

asked by: Truman K

0

Expert Reply:

You would measure the overall width of the trim so if it is 1 inch on the trailer now then you would want to use 1 inch trim such as # CAM25222. The good thing about this is that even if something occurred and it turns out you need 3/4 you could trim the trim on each side to make it more narrow.

expert reply by: Michael H

0

Answer 1

The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't really recommend measuring the track as they are not all a standard width. That said, we only offer vinyl…

view full answer...

Answer 2

Hi Vint; the Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding #SR78FR is designed to fit a 3/4" track. It measures 25' long x 7/8" wide x 3/8" tall. If your dimensions and profile match the picture below this will work…

view full answer...

Answer 3

Hey Paula, To find the correct replacement trim pieces for your trailer we'll need to know the profile and dimensions of the both the window seals and the channel. If you pop out the window seal a bit you should be able to see its profile and…

view full answer...

Answer 4

The Rubber Trim for Vehicle Trim Molding, #SR78FR is 7/8" as shown in the attached and identified as fitting 3/4" tracks as measured on the inside, such as your measurement is taken.

view full answer...

Answer 5

I do have an option for you but the bumper mounted spare tire carriers are not made for vehicle/motorhome wheels, they are for trailer wheels. The problem with the vehicle/motorhome wheels is that the bolt pattern is usually too large and they tend…

view full answer...

Answer 6

Thank you for the pictures, you're just needing the trim inserts. You'll just need to measure the space available for the trim insert to find the correct size. We carry 3/4" #CAM25262 and 1" #CAM25202 widths.

view full answer...

Answer 7

When replacing your vinyl molding trim you should measure the overall width of the trim. Since yours is 7/8" I recommend going with the 1" trim, and here are the available options in either White or Black: - 25 Feet: White #37210025 or…

view full answer...

Answer 8

Thank you for the photo of your travel trailer's window trim channel for which you are looking for new cosmetic vinyl trim. I went to our warehouse to look at Camco trim insert #CAM25262 which at 3/4-inch width is the closest to your…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Measuring the Width of Trim on a Trailer to Choose Replacement Roll of Trim

Products Featured in This Question

Continue Researching