Trailer Plug to Replace Lance 7-Pin

Question

Question:

is there plug and play adaptor to plug a Lance camper with 7 pin round directly into 7 blade in 2021 F450 truck bed camper is 2009 Lance 992

asked by: RICHARD G

0

Expert Reply:

Due to Lance having a proprietary plug, there isn't a plug-and-play adapter to go into the 7-way on your Ford F-450. So what you will need to do instead is cut off the Lance plug and replace it with a standard 7-way, the Pollak # PK12706.

You will need a circuit tester as well to determine the functions of the plug, and the easiest to use is the Cordless Circuit Tester # PTW2979.

expert reply by: Kyle S

0

Answer 1

For the Fan-Tastic RV roof vents the correct vent cover is the part #FVU1500WH which comes with the needed hardware to install on your camper.

view full answer...

Answer 2

Assuming you have a standard 6-way plug and not the proprietary Lance plug on your camper you can use the #HM47085. This will plug into the 7-way on the bumper of your truck and connect to the 6-way on the camper. If you have the Lance plug, you will…

view full answer...

Answer 3

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

To keep the Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long #RP45292 you were looking at from having movement I recommend adding the Roadmaster Quiet Hitch for 2-1/2" Trailer Hitches #RM-062 which…

view full answer...

Answer 6

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 7

Hello Rick, thanks for reaching out. I do have a solution for you, but there is no adapter for the 3 prong plug on your lance camper. Lance uses proprietary plug, so your best option is to replace it with a 7-way plug like the Hopkins 7-Way Blade…

view full answer...

Answer 8

The MaxxAir II RV and Trailer Roof Vent Cover part #MA86JR is sufficient enough for either fan as long as they are the standard 14x14 fan. However, I do recommend to use a Fantastic Vent Ultra Breeze Trailer Roof Vent part #DMC38FR because it is…

view full answer...

Answer 9

Hey Michael, it sounds like you're looking for the MaxxAir Standard Roof Vent Cover #MA00-933066. This cover goes over your existing Fantastic vent, and will let you use your vent in less than ideal weather like rain! This cover measures 20"…

view full answer...

Answer 10

These are universal fits so yes, your Fan-Tastic vent is compatible with the MaxxAir II RV and Trailer Roof Vent Cover with EZClip #MA86JR. Since yours is an older Fan-Tastic model, you will need to drill screw holes in order to use this vent cover…

view full answer...

Answer 11

The trailer hitch on the truck is what supports the extension. The extension is designed to fit in a 2-1/2 inch receiver (measuring on the inside) and the receiver part of the extension has a 2 inch receiver opening. The only thing you need for the…

view full answer...

Answer 12

Yes, as long as your Lance camper has a 6-way plug the part #HM47085 will allow you to connect it to the 7-way you have on your truck.

view full answer...

Trailer Plug to Replace Lance 7-Pin

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching