Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle - 1,600 lbs #FW16000101 you referenced measures 6-1/2 inches high and at its longest is 8 inches, as you can see by the accompanying photo. The base of the Fulton F2 is…
view full answer...Yes, the new brake controller will work whether or not you have the ITBM reprogrammed on your 2012 Ram 2500. I recommend the P2 #90885. It will require harness #3021-P which will plug into a connector located under the dash near the emergency brake…
view full answer...The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…
view full answer...Realistically there isn't a noticeable difference between the two Curt gooseneck hitches that both fit your 2013 Chevy Silverado 2500HD. Both the #C607-604 and #C611-624 are a great fit that will for all intents and purposes work just as well as…
view full answer...Easiest solution for that would be the Curt auxiliary LED indicator lights part #C53201. This would allow you to add stoplight/turn signals to your bike rack and it plugs into a 4-way like you mentioned.
view full answer...In order to create a wiring harness for the two Thinline LED Trailer Tail Lights part #STL59RB I recommend using the Wesbar 4-Pole Flat Connector part #W787264 along with the Deka Heat Shrink Butt Connectors part #DW05744-5. The white wire on each…
view full answer...The trick here is to get as close as possible. If you are talking about less than 2 inches or so, there is nothing to worry about. Having the trailer tongue a bit too high is preferable to it being too low. You may be a good candidate for an…
view full answer...In order to separate two awning head covers such as the Solera Awning Plain Drive Head Front Cover part #LC289560 and the Solera Awning Plain Drive Head Back Cover part #LC289561 you'll need to remove the screws which are accessed from the back…
view full answer...I checked with Torklift and they informed me that the Cannon #TLE1636 is made of 2 different tubes that overlap. One of them has a wall thickness of .25 and the other is .21. One tube fits inside of the other so the wall thickness is different at…
view full answer...We do offer hitch extensions for the factory 3" trailer hitch receiver on your 2017 Ford F-350 Super Duty, but there is not one that is 24" long. The shortest extension available is the TorkLift Cannon Hitch Extension - 3" Ford Super…
view full answer...There is one extender that will work with the 3 inch factory hitch on your 2017 Ford F-350 Super Duty, the TorkLift Cannon Hitch Extension, and it comes in three different lengths: 36" Long #TLE1636, 42" Long #TLE1642 and 48" Long…
view full answer...Setting up your 2022 Chevy Colorado ZR2 for flat towing will require a few things, but I have a full list of everything you need below. The base plate I have listed will also work with or without the Adaptive Cruise Control option on your ZR2, so no…
view full answer...Related Searches
Filter Your Search
Contact and Help