Replacing European 13 Pin to Connect to Trailer 4-Way

Question

Question:

Hello! How can I hook up a standard 4 pin trailer to my 13pin on my 2004 audi allroad

asked by: Andrew B

0

Expert Reply:

What you'll need to do to hook up a trailer with a 4-way to your Audi is remove the 13-pin and replace it with the Tail Light Converter with 4-Pole Flat Trailer Connector # C89VV.

You'll use Circuit Tester # PTW2993 to find the lighting functions of your 13-pin connector, and connect them to the # C89VV. The wires for this part are as follows:

Red Wire - Brake Lights
Yellow Wire - Left Turn Signal
Green Wire - Right Turn Signal
Brown Wire - Tail Lights/Running Lights
White Wire - Ground

This converter only has one wire for the brake lights and running lights so you'd only use one of those wires from your 13-pin to this converter. Then to mount it you'd use Mounting Bracket 4-Pole Flat # 18144.

expert reply by: Kyle S

0

Answer 1

There is a trailer wiring harness for your 2021 Audi Q5, but only a universal hardwire kit, and not specific to your Audi. What you can use is the following: - ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector #119250KIT

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

When installing the Tekonsha Vehicle Wiring Kit #119250KIT on your 2014 Audi Q7 the harness wires will clamp directly to the appropriate circuit wires on the vehicle without splicing into the wire. You won't be able to attach or connect to the…

view full answer...

Answer 5

The #41155 is designed to replace a trailer 7-way and provide a 4-way connector. Sounds like you do not have any trailer wiring so this product wouldn't be the correct wiring kit. The only solution we would have would then be a universal wiring…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacing European 13 Pin to Connect to Trailer 4-Way

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching