Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
This item does not fit your vehicle
2012 Ford Edge
These items fit your vehicle
2012 Ford Edge
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
This hitch says it fits Volvo XC60 2019 model but it doesn't. Please mark this hitch as not compatible with this car model.
Lazer S.
12/30/2025
I just heard back from Curt and this is what they said to me asking if there were any issues they had any issues with fitment on the XC60: Only one in our feedback system. And it was determined at that time to be incidental contact and not an issue. It's always a snug fit on those, but the areas shown it looks to need a little massaging to make it fit. Have you tried torquing everything down to see if it did kind of push itself into place?
This is a good hitch but with a design flaw. The safety chain eyelets are welded below the hitch - I’ve scrapped the eyelets several times while driving through a dip. The vehicle clearance is fine but the eyelets should have been placed on the sides (like most trailer hitches). This bothered me so I cut the eyelets off with an angle grinder and re-welded them to the sides (where they should have been placed). See photo for the improved hitch design.
Does not fit a 2020 XC60. The hitch isn’t wide enough to clear the upper lip of the rear faceplate. Curt sent me a replacement, but it was actually narrower than the first. I even tried bending the hitch slightly to gain clearance, but it made no difference. It seems Curt may have based the hitch’s design on the XC90, whose rear faceplate differs from the XC60. On the XC90, the top lip is less pronounced, providing more clearance, unlike the more aggressive lip on the XC60, which causes interference.
I decided to just go for trailer hitch receiver for my Volvo XC90 from etrailer as they have a good reviews and video of DIY installation. My son actually started the installation work while I was finishing up my yard work, just checking on him from time to time. It took him exactly 2 hours from start to finish. The hard part was just removing the bumper cover being it's a plastic and he was trying not to damage/cracked the part. We have not installed the wiring harness yet.Its's plug and play. The hitch itself is a bit heavy but really easy to install. The instruction says we can just use the 3 existing bolts and nuts or if wanted, add the the 4th one that came with the hitch. This will just be use for occasional 5x8 yard trailer and maybe bike rack. With this hitch, I don't have to think about going back to buying another truck in the next couple of years, saving me money.
Sturdy and easy to use hitch. I had it installed professionally and use it with my bike rack.
Great fit and easy install after watching the video. The fascia trimming was very minor and easier than expected. One of the mounting bolts is somewhat inaccessible but with a proper combination of ratchet extensions, it's possible. Installed in about an hour.
It fit with just a little modification to the bumper shroud on my Volvo xc60 it holds a bike rack with an e-mountain bike without any issues.great product and installation videos thanks. The only improvement would be to recommend an electrical adaptor for a trailor
Took it off my 2018 XC90 and a direct fit, installed on my 2022 XC90 T6 Inscription and no cutting required u like my 2018.
Great looking and great customer service
Instructions and video were very helpful, made installation go very smoothly.
Fit like a glove, great quality. Good instructions would recommend and purchase again.
Customer service is outstanding!!!!
Delivery was prompt and followed up by CS. I used the excellent video and had it installed solo in 1.5 hours (without wirimg harness). I only had to bend the heat shield up in the middle like he said in the video, no cutting except the center of the underside of the fascia. I'll write another after I do the wiring harness.
This is my second hitch set up from etrailer and I'm very pleased with both purchases.
Perfect fit
This is the 5th hitch we have purchased through ETRAILER.com
everything has been quality. The shipping is super fast. The customer service is great.. This is how companies should operate. I'm thankful and will ALWAYS us them
Excellent design. I love how this dovetailed behind the trim of my car (Volvo XC90) All you can see is the 2" receiver.
Fantastic Build quality! And a great price! I saved easily 400$+ by installing it myself. Took maybe an hour of my time. Pulls the boat and the bikes.
It is always a good experience dealing with etrailer.com. Very helpful folks, especially George J. I highly recommend this company!
I think the quality control at Curt may be suffering. The product is very sturdy and well constructed, but their joints are crooked. I received the product and the hitch was about 3 degrees off square from the crossbar. I returned it thinking it was a one-off error. The second hitch I received was about 1.5 degrees off of square. I'll make it work, but I was definitely disappointed in Curt's attention to detail.
Gwendolyn Y.
3/12/2025
Hey Paul. I'm sorry to hear about the hitches. Would you be able to get some pics showing what your explaining? I can get ahold of my contact at Curt.
Hi quality assembly and installed without any drama.
Easy to install with clear instructions. Well packaged by etrailer rather than drop shipped as some other suppliers do. Appreciate the thorough tracking and follow up email once the product arrived.
Recommend keeping the car keys out of range of the vehicle or disconnecting the battery so you don't accidently trigger the rear hatch sensor while you're removing the rear facial.
Hitch is nice and went on fairly easily. Instructions missing descriptive step for removal of screws in each wheel well. Also not sure it was necessary to trim heat shield at each end of the bumper as it would have not affected install (a reason why in the instructions would be nice).
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
12/30/2025
I am working with Curt directly on this, but the picture of the pieces not letting the hitch sit flush is addressed in step 5 of the instructions (linked to this response). We also have an install video of this being installed on a 2018 XC60, which is the same generation), so I'm wondering if you maybe got one that is out of spec or something. Either way, I will let you know what Curt says as soon as I hear back from them.
Helpful Links
https://assets.curtmfg.com/masterlibrary/13467/installsheet/13467_ins.pdf
tv-install-curt-trailer-hitch-receiver-custom-fit-class-iii-2018-volvo-xc60-c53hr.aspx