Result: fuse

Hey Darren, the studs of the Optronics Fusion LED Trailer Light #OPT45KB that you referenced are not designed to thread out of the assembly easily. You could take a cutting wheel to them and cut them off flush pretty easily though if you wanted to…

Hey Sal, the Optronics Fusion LED Trailer Light #OPT45KB is for just 1, not set of 2. These are super nice, but if you want some other options to consider, we also have the Fusion LED Hardwired Trailer Light #OPT57NR which does have the same…

Hello James, To replace your Atwood 8940-111-DCLP, you will want to go with the Dometic RV Furnace - Propane - Automatic Pilot - 12V DC - 40,000 Btu Black #DMC48RR (or White Door #DMC68RR, or doorless #DMC72ZR). This is going to be your best…

Good morning, Dana! Yes, you are in luck because the new models use WFCO’s Auto-Detect charging, making it compatible with: -Lead-acid (flooded and AGM) - 3-stage charging -Lithium - 2-stage charging up to 14.6V No switches. No settings. The…

Hey Ken, when wiring up the Victron charger part #VN93VR you do need to run the ground from the negative battery post as well as to a chassis ground. I know that seems redundant but in every diagram in the instructions that step is shown. I attached…

Hey Daniel! That’s one of the benefits of these newer WFCO Auto-Detect panels. You won't need to replace anything again since they are compatible with lithium. The new models like #WF46FR, #WF86FR, and #WFC72GR all automatically detect lithium…

We've got just what you need. If you don't already have a 4 way connector on the back of your 2020 Jeep JL you'll first need to install that using the Tekonsha T-One Wiring Harness #118786. This harness will tee into your Jeep's tail…

Hey Lee! The Victron parts can get pretty confusing. The Victron Orion-Tr #VN75ZR is only designed to be a power supply for DC loads, not for battery charging. You do not want to use this converter to charge any type of battery. To charge your…

Hey Ed! I reached out to NOCO and they said the Commercial Grade Battery Box for Group 4D Batteries #329-HM408 will be able to fit inside. There is enough flex, it will just be incredibly tight. This also means you won't have to try to fit the…

Hey David, thanks for reaching out. No, that Victron Orion XS RV Converter #VN93VR isn’t going to do what you’re thinking in that situation. It’s built to take power from one 12V source, usually your alternator while the engine is running, and charge…

Hey AJ! The best option for your setup is the Victron Orion XS RV Converter - DC to DC - 12V/12V - 50 Amp #VN93VR. This will take power from your truck’s alternator and charge your RV batteries while also preventing any backfeeding into the truck.…

Hey Lloyd, thanks for reaching out. We have just the thing. You can replace the main board assembly to make your WF-8955 compatible with Lithium batteries. For that you will need the following: - Replacement Main Board Assembly for WFCO Auto-Detect…