Bolts for Demco Channel Mount Trailer Coupler

Question

Question:

are the channel mount couplers available in bolt mount?

asked by: Tom

0

Expert Reply:

The Demco Trailer Coupler # DM12688-95 does install to a channel bracket using bolts like what we find in the Kit # DM6166.

If you were looking for a bolt-on channel bracket then the part # DM13867-52 would be what you're looking for which fits 3" wide channel tongues.

If you were talking about something else please let me know and I'd be happy to look into it.

expert reply by: Jon G

0

Answer 1

Yes, the Curt Lunette Ring #C48600 will fit great with your Demco 5-Position Adjustable Channel Bracket #DM13867-52. To install the ring you can use the Curt Bolt Kit #C48620.

view full answer...

Answer 2

Yes, you will want to sleeve the aluminum extrusion on your Legend cargo trailer when you install the Demco 5-Position Adjustable Channel Bracket #DM13867-52. This will help prevent the frame channel from being crushed.

view full answer...

Answer 3

The inside mounting channel width is just under 2 inches, while the outside width (as you mentioned), is just under 3 inches, designed to fit into a 3 inch wide channel, like #BDAC5000300. The overall length is 10 inches, as shown in the attached…

view full answer...

Answer 4

Bulldog Collar-Lok Coupler #BD028287 and similar couplers have a sleeve that constantly puts pressure on the front of the coupler, the part that goes around the ball, so that it cannot come loose. There is also more surface area of the coupler making…

view full answer...

Answer 5

Hello James; yes, the Demco 5-Position Adjustable Channel Bracket #DM13867-52 has a silver powder coat finish.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Bolts for Demco Channel Mount Trailer Coupler

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching