Demco 5-Position Adjustable Channel Bracket Review Video

There is a lot to unpack here so I'll try address your concerns as best I can. First, you should not use a spacer of any kind to ensure your wheels fit; this would cause potential installation issues with the overall assembly not to mention void…

Since you are building an off-road trailer you would want the Timbren Heavy-Duty Axle-Less Trailer Suspension #ASR2KHDS02. This comes with a longer spindle to let you use a wider wheel and tire than the Timbren Axle-Less Trailer Suspension System…

If your boat trailer has a 3" wide tongue then yes the Demco 5-Position Adjustable Channel Bracket #DM13867-52 will work great. If not, feel free to let me know what you have and I can look and see what we have.

The distance between the two holes you are looking for is 2-1/2 inches. This #PA-1 is designed to attach to a weight distribution shank that has 1-1/4 inches between the mounting holes. I added the dimension to the picture you submitted.

Technically, a trailer rated for 10,000 lbs can have 5 lug hubs. They are most common on 3,500 lb axles but can be used on the rare 4,000 lb axles as well. You could have a gooseneck or 5th wheel trailer with the 10,000 lb capacity and tandem axle 5…

Demco coupler #DM15791-97 is designed to fit a 3 inch wide channel bracket such as #DM59602. On the coupler where it mounts to the channel the distance from the outside of one flange to the other is approximately 2-7/8 inches. I have included a…

The Replacement Entry Door Hinge for RV - 6 Leaf - White #LC198295 could very well be what you're needing for your 2001 Fleetwood Expedition 36T Diesel but even if you sent me pictures of your current hinges you would be the better judge of that…

There isn't a database for us to check the door based, only the manufacturer would be able to look up any info on it. The friction hinges #LC95VR and #LC22NJ that we carry are a universal fit so they will fit most RV doors but typically will not…

You will need the Dexter Electric Trailer Brake Kit w/ Parking Brakes #23-112-113 to replace the 12"x2" electric brakes on your trailer. This is a set which contains one set for the left and right side of your trailer. Since you are…

For mounting the Demco 5-Position Adjustable Channel Bracket #DM13867-52 you will need to source 1/2" grade 5 mounting bolts from your local hardware store. This will allow you to secure the bracket to a 3" wide channel tongue.

Hey Isaac! While we don't have one specific all in one kit we do have every component you will need to update your trailer's lighting and brakes. I recommend using the Trailer Wiring Kit item #ET7WK. This includes a 7-Way connector, a…

Hey Carlos we do have a good solution for converting the 2" ball coupler on your trailer to a lunette ring. What I recommend is the Demco 5-Position Adjustable Channel Bracket #DM13867-52. This can be bolted to a 3" wide trailer tongue and…