Hardware Kit for Demco Adjustable Channel Mount Couplers

See what our Experts say about this Demco Accessories and Parts

• Help Understanding and Achieving the 21K Weight Capacity of Demco Trailer Coupler # DM14040-81
  First I want to make sure you verify your channel mount for the Demco Trailer Coupler # DM14040-81 has a 21K or larger capacity as often times they are less like the Demco # DM15349-52 which often times people look at and think it is a channel mount like the coupler so it has to be rated the same. The other big hang up most people have is the see the Hardware # DM6166 only being grade 5 instead of grade 8 which should be stronger. The big difference is while grade 8 bolts allow for more...
  view full answer...
• Is The Composite Or Steel Demco EZ Latch Coupler A Better Choice Over The Other?
  Personally I prefer the Demco Trailer Coupler # DM14976-52 with the composite handle over the Coupler # DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most trailers are always outside the safety latch tends to get some corrosion in the handle and can become difficult to open. Both these couplers will need the Hardware Kit # DM6166 to mount to a 3" channel. You will need a locking pin like the...
  view full answer...
• Torque Needed For Bolts on Demco Channel Mounted Coupler
  Good question; the bolts in the Hardware Kit for Demco Adjustable Channel Mount Couplers # DM6166 should be torqued to 150 lb-ft during install of a Demco coupler like # DM14040-81 to a bracket like # DM66134.
  view full answer...
• Length of Bolts in Demco Hardware Kit 6166
  I went out to the warehouse and found that the thread of the bolts in the Hardware Kit # DM6166 you referenced is about 1-3/4" long while the overall length of the bolts is 2-1/8" which you can see in the attached photo.
  view full answer...
  
• Bolts for Demco Channel Mount Trailer Coupler
  The Demco Trailer Coupler # DM12688-95 does install to a channel bracket using bolts like what we find in the Kit # DM6166. If you were looking for a bolt-on channel bracket then the part # DM13867-52 would be what you're looking for which fits 3" wide channel tongues. If you were talking about something else please let me know and I'd be happy to look into it.
  view full answer...
• How to Mount an Adjustable Trailer Coupler
  Adjustable trailer couplers are not going to mount to your truck; they will attach to the frame of your trailer. Some of the adjustable couplers, such as the Bulldog Cast Head # BDA2563C0317 come with the mounting hardware to weld onto the frame of your trailer. Others, such as the Demco # DM15791-81, come with the channel bracket # DM66134 and mounting hardware # DM6166 separately. I've added a link to our page with each of our 2-5/16" adjustable trailer couplers for you to take a look at.
  view full answer...
• Replacement Actuator and Coupler for 2013 Jayco Jay Flight
  For the Jayco RD-19 you would use the Demco Hydraulic Brake Actuator - Drum - Primed - A-Frame - Adjustable Channel Center - 8,000 lbs # DM8759522 and then the Demco Trailer Coupler - Cast - Adjustable Channel - eZ-Latch - Black - 2-5/16" Ball - 21K # DM14040-81. Then use Hardware Kit for Demco Adjustable Channel Mount Couplers # DM6166.
  view full answer...
• Recommended Channel Mount Coupler/Brake Controller Installation for Trailer Towed By 2010 Tacoma
  The Demco # DM12688-95 you've looked at would be a good choice. The 2 inch channel mount coupler is compatible with a 3 inch channel, and has bolt spacing of 2 inches on center. Demco is known for high quality products, you'll get years of service out of the coupler. With a 10K capacity it'll be a lot stronger than you really need, but whenever you're talking weight capacities and safety, a little overkill is a good thing. I've heard of absolutely no problems with the Demco Ez-Latch system....
  view full answer...
  

Do you have a question about this Accessories and Part?