Correct Fastway e2 Weight Distribution System for a Forest River Wolf Pup 17JG

Question

Question:

What is the correct size Fastway E2 for a Wolf Pup 17JG?

asked by: Don C

0

Expert Reply:

The correct Fastway e2 Weight Distribution System for a Forest River Wolf Pup 17JG is part # FA92-00-0800. That said, you will still need a hitch ball, part # EQ91-00-6080 for 2" or part # EQ91-00-6100 for 2-5/16".

expert reply by: Conner L

0

Answer 1

I have confirmed with my technical contact at Pro Series and the Weight Distribution system that you referenced, the #C17322, can be used with a 2 inch trailer ball. This assembly comes equipped with a 2-5/16 inch trailer ball that is 2-1/2 long, and…

view full answer...

Answer 2

Hey Ron, no there isn't a way to do that. The larger ball will not fit into the coupler. You'll need a 2 inch ball like the part #A-90.

view full answer...

Answer 3

Hey Norm, yes you can swap the ball on the B and W Continuum to the 2 inch hitch ball size but you have to use their ball part number HB94021 which comes directly from them.

view full answer...

Answer 4

Hey Linda. There's two options for SumoSprings that work with your 2021 Forest River Cherokee Wolf Pup 16BHS. Which one you need is going to depend on how your axle is mounted to your springs. If your axle is mounted above your leaf springs,…

view full answer...

Answer 5

Hello Mike, thanks for reaching out. I see you already have the kit on order, but I wanted to make sure your question was answered. When Installing the #TSS-106-40 Sumo Springs on a tandem axle trailer, the helper springs will get installed in the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Correct Fastway e2 Weight Distribution System for a Forest River Wolf Pup 17JG

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching