Recommended Trailer Hitch Receiver, 7-Way and Brake Controller For a 2021 Toyota Highlander Hybrid

Question

Question:

I need to add a tow package to my 2021 Toyota Highlander Hybrid to tow a small travel trailer. The trailer does have electric brakes so I will also need a brake controller. Can you list the parts so I know what all I need?

asked by: Melvin

0

Expert Reply:

First you will need a receiver, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # DT65MR for your 2021 Toyota Highlander Hybrid. This receiver will allow you to use a weight distribution hitch like the Equal-i-zer Weight Distribution System # EQ37060ET which will provide you with a safer ride as it will allow you to better keep your Highlander level and will reduce trailer sway caused by wind and large trucks.

The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK57VR will provide you with a 7-way trailer connector and the wiring needed to install a Tekonsha Prodigy P3 Trailer Brake Controller # 90195. You will need a Mounting Bracket # PK12711U to connect the 7-way connector to the mounting tab already on the Draw-Tite receiver.

expert reply by: Bud M

0

Answer 1

In terms of how the hitch would appear from the rear, the Draw-Tite #DT65MR and Curt #C13200 are practically identical. The receiver tube plus several inches of the crossbar on either side of the receiver tube will be visible from the rear. The…

view full answer...

Answer 2

It appears you have done some research as some hitches won't allow the aluminum rim full size spare because it is slightly wider. For your 2018 Toyota Highlander I recommend the Draw-Tite Max-E-Loader Trailer Hitch Receiver #DT65MR. This is a 2…

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver part #DT65MR will allow for the full size spare tire to be stowed under the vehicle on a 2021 Toyota Highlander. There are other options with a hidden cross tube which looks better but there won't be…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi LaMar, To add a 7-way plug to your 2024 Toyota Highlander SLE you'll need to use the etrailer Universal Installation Kit for Trailer Brake Controllers part #ETBC7. This kit will give you a functioning 4-way flat and 7-way for towing and…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended Trailer Hitch Receiver, 7-Way and Brake Controller For a 2021 Toyota Highlander Hybrid

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching