What Bearing Kit Is Needed For My 2021 Grand Design 2910BH 4,400 Pound Dexter Axles.

Question

Question:

I have a Grand Design 2021 2910BH and would like to get a spare wheel bearing and seals, however I do not see the 2910BH as an option when searching. I have Dexter 4400lb axles...What part numbers do I need?

asked by: Troy

0

Expert Reply:

The Dexter 4,400 pound will need the same type of kit used for the 3,500 pound axle.

You can find it here, Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle # BK2-100. I suggest getting some extra seals too because they are not reusable. Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2 # RG06-050.

expert reply by: David B

0

Answer 1

The Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part #BK2-100 which comes with bearings, races, and seals. It looks like the 85 number you have found in your part…

view full answer...

Answer 2

Hey George, we do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following: Bearings #L68149…

view full answer...

Answer 3

Hey Gerald, this is a great question but basically the Lippert 4,400 lb axle just uses the same bearings as the 3,500 lb axles. The bearings themselves aren't actually rated for weight and instead we just organize them based on what axle…

view full answer...

Answer 4

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 5

We do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following: Bearings #L68149 and…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hi Rosann, I’m really glad you reached out because I know how frustrating it is to keep dealing with a fridge that works for a while and then quits again. Based on your 33" by 64" opening and wanting to keep things budget-friendly, I…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

What Bearing Kit Is Needed For My 2021 Grand Design 2910BH 4,400 Pound Dexter Axles.

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching