Bearing Kit for Lippert 4400 Trailer Axle

Question

Question:

I think the spindle size on my Lippert 4400 lb. axle is 85 according to the tag on the axle. would that still use the same bears as the 84 spindle? LC152-SB-85-68.5-NOSP-OS-L-65516-7278-30PT-GAWR 4400# Looking for bearing kit for my 2017 Keystone 1/2 ton Cougar 5th wheel 297RKSWE.

asked by: Willi C

1

Helpful Expert Reply:

The Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part # BK2-100 which comes with bearings, races, and seals. It looks like the 85 number you have found in your part number is based on the hub face to hub face dimension of the axle.

expert reply by: Jameson C

1

Answer 1

Hey Travis, the Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part #BK2-100 for a kit that includes the correct bearings and seal. Are you doing yearly maintenance or…

view full answer...

Answer 2

I believe you almost solved the problem when you swapped the wiring, but in reality you needed to use 10 gauge wire like part #10-1-1 (sold by the foot). You are experiencing a voltage drop due to the long distance of wire that's not thick…

view full answer...

Answer 3

The best option for you is going to be to crawl under the trailer and read the tag on the center of the axle. This will tell you the weight capacity of your axle which will be needed to find the correct replacement braking assembly. I can see from…

view full answer...

Answer 4

We have exactly what you need for the bearings and seals for a Lippert 4,400 lb axle, which is Bearing Kit #BK2-100. This kit includes inner bearing #L68149, inner race #L68111, outer bearing #L44649, outer race #L44610, grease seal #58846, a cotter…

view full answer...

Answer 5

For a Lippert 4,400 lb trailer axle the correct bearing kit is the part #BK2-100 which includes inner bearing #L68149, inner race #L68111, outer bearing #L44649, outer race #L44610, grease seal #58846, a cotter pin and a tang washer.

view full answer...

Answer 6

For your 7K Lippert Axle I'd go with the etrailer #AKEBRK-7-SA you were looking at. They will be a direct replacement, and will include both sides for one axle, if you have two axles, you're going to need two of these. I really like the…

view full answer...

Answer 7

AxleTek is who makes our etrailer brake assemblies like the #AKEBRK-35-SA. We have found that while not considered to be as much of a premium brand like the Dexter assemblies they work just as well and happen to cost a lot less. To put it a different…

view full answer...

Answer 8

Hey George, we do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following: Bearings #L68149…

view full answer...

Answer 9

Hey Gerald, this is a great question but basically the Lippert 4,400 lb axle just uses the same bearings as the 3,500 lb axles. The bearings themselves aren't actually rated for weight and instead we just organize them based on what axle…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

The Dexter 4,400 pound will need the same type of kit used for the 3,500 pound axle. You can find it here, Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle #BK2-100. I suggest getting some extra seals too because they…

view full answer...

Answer 12

We do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following: Bearings #L68149 and…

view full answer...

Bearing Kit for Lippert 4400 Trailer Axle

Product Page this Question was Asked From

Continue Researching