Parts Needed For Installing a Custom Seat Adapter In a Jeep TJ Wrangler For a RoadMaster BrakeMaster

Question

Question:

Does Mounting Post #450596 come with the Seat Adapter Kit #88154 or the Roadmaster #9160 Brakemaster or does one have to purchase that part separately?

asked by: Victor B

0

Expert Reply:

The RoadMaster BrakeMaster Custom Seat Adapter # RM-88154 that fits a 1997 - 2006 Jeep TJ/Wrangler does require a Mounting Post # RM-450596.

You may already have this post with the Roadmaster BrakeMaster System # RM-9160 as one was included with the kit. If this is for a second vehicle the Second Vehicle Kit # RM-98160 also includes the mounting post.

expert reply by: Bud M

0

Answer 1

In order to flat-tow a 1998-2006 Jeep Wrangler TJ with all four wheels on the ground you will need a base plate kit, tow bar, safety cables, flat-tow wiring harness, supplemental braking system, and possibly a high-low adapter. I have attached my…

view full answer...

Answer 2

The base plates you can install on your Jeep depend on the bumper style you have. If you have a U-channel bumper the base plates that will work are part #1417-1. If you have an off-road bumper with the 1-inch D-Ring bumper mounts then the base plates…

view full answer...

Answer 3

We have three Roadmaster base plate fits for the 1998 Jeep Wrangler TJ with the u-channel bumper that appear on the linked page. These items are the fixed-install Classic #1417-1, and the kits with removable arms, EZ5 #RM-521424-5 and the EZ4 kit…

view full answer...

Answer 4

I've put together a photo for you showing the dimensions of the #e98975 etrailer Replacement Tow Bar Adapter Kit for Roadmaster Direct-Connect Base Plates. I've also linked to a product description video for the adapter kit.

view full answer...

Answer 5

Hey Baihr, In order to fully know if a brake-lite relay is needed for your setup there is a short questionar we recommend going through to determine if you need one. Since I do not have your vehicle in front of me it is a little difficult to tell.…

view full answer...

Answer 6

Hey Louie! Yes, the etrailer Anti-Rattle Hitch Collar #e38FV can be used with a hitch extender. You will want to add this to the 2" receiver on the trailer hitch on your Jeep. The anti-rattle feature on your Kuat Transfer V2 Bike Rack #KU84FR…

view full answer...

Answer 7

You can obtain the replacement air line right here for your Roadmaster BrakeMaster Braking System #RM-9060. The air line hose is sold by the foot so you can get the exact amount you want, with the correct part number being the following: - Air Line…

view full answer...

Answer 8

The air line assembly for the Roadmaster BrakeMaster, #RM-921004, is 76 inches long. This cord is only 12 inches shorter than the 88 inch cord #RM-921004-88. I spoke with my contact at Roadmaster and he told me that these are the only two…

view full answer...

Answer 9

Yes, 1/4 inch air line like part #RM450700 would fit over the fitting part #RM-450735 that you referenced.

view full answer...

Answer 10

In order for this wiring harness to be installed correctly, you will have to unplug the brake wires on your 1998 Jeep Wrangler. Your wiring harness, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, part #HM56202, should have two plugs per…

view full answer...

Answer 11

There are a number of replacement parts available for your Falcon All Terrain Tow Bar #RM-522. Without knowing the specific parts you are seeking, I'll list what we have available for you to take a look at. - Replacement Inner Arm #910021-65 -…

view full answer...

Answer 12

You will need the Pollak 6-Pole #PK12720 to replace the end on the Hopkins Custom Tail Light Wiring Kit #HM56200. You will cut off the 4-way end and connect the wires inside the 6-pin connector. We do have a Mounting Bracket #PK11771 which will make…

view full answer...