Which Trailer Hitch Receiver Fits A 2013 Porsche Cayenne?

Question

Question:

Looking for a 2inch hitch for a 2013 Porsche Cayenne. Ive read online that the Curt 13116 for the Toureg is a perfect fit. I also read there is a Draw-Tite equivalent that should work, but I dont know the model number. Do you know what model I need?

asked by: Kurt A

0

Expert Reply:

The correct Draw-Tite Trailer Hitch for your 2013 Porsche Cayenne is the Draw-Tite # 75950 and is a great cost effective option that fits nearly the same as the Curt Trailer Hitch # C13116 you mentioned.

Between these two hitches I would go with whichever hitch is the most cost effective at the time as they share the same 750lb tongue weight rating and 7500lb trailer weight rating and are very similar in overall design and installation.

If you are planning on towing a trailer with your Cayenne you will also need a vehicle wiring harness # 119190KIT.

I included written instructions and some videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

For your 2018 Porsche Cayenne I recommend the Draw-Tite Class III Max Frame Receiver Hitch #75950. Both this hitch and the Curt #C13116 that is also available for your vehicle feature similar designs and identical weight capacities (7,500 pounds…

view full answer...

Answer 2

I checked with Curt and they do list trailer hitch #C13116 as a fit for all models of the 2016 Porsche Cayenne. The all models would include yours as well. There is no trimming of the rear fascia indicated in the installation details, linked for…

view full answer...

Answer 3

For a hitch receiver I suggest the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75950. It has a 750 pound max tongue weight and a 7,500 pound gross trailer weight. It is a bolt on, no drilling, install that takes…

view full answer...

Answer 4

There is just a single difference between the Curt and etrailer trailer hitches that fit your 2017 Volkswagen Touareg, which is the finish - the Curt has a glossier finish than the matte black finish of the etrailer hitch. The hitches that fit your…

view full answer...

Answer 5

You can install a 7-way and brake controller in your 2009 Audi Q7 with the Draw Tite hitch #75950 that you are planning on installing but you have to start with a 4-way since your vehicle isn't pre-wired for a 7-way. So for that you'd want…

view full answer...

Answer 6

On the 2015 Porsche Cayenne whether it is a hybrid or gas model there will be a metal bumper structure behind the rear fascia. This is where the hitch installs so it would not interfere with anything forward of that location. I have included a link…

view full answer...

Answer 7

I reached out to my contact at Tekonsha and there are a few things that could be causing the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit #119250KIT you installed on your 2014 Audi AllRoad to have…

view full answer...

Answer 8

We haven't had the opportunity to install the ZCI Circuit Protected Vehicle Wiring Harness #119250KIT on a 2013 Porsche Cayenne as of yet (August 2023), but I do have an install video on a 2017 Cayenne to help you. Basically, what you want to do…

view full answer...

Answer 9

For your 2016 Porsche Cayenne I recommend trailer hitch #75950 because it does not require a strap when using the hitch with your bike rack. The Curt hitch #C13116 does have this requirement but it is the only one of the hitches for your Cayenne with…

view full answer...

Answer 10

Yes, the Curt Trailer Hitch Receiver part #C13116 has been tested and is a confirmed fit for your 2018 Porsche Cayenne E-Hybrid. This is a Class III hitch with a 2" receiver tube opening. It is made in the U.S.A. and comes with a lifetime…

view full answer...

Answer 11

I attached a couple pictures that I took from the install instructions for the part #75950 that you referenced. According to the instructions the only fascia trimming that would be required would be if you installed the hitch on a Touareg.

view full answer...

Answer 12

Between the Curt and Draw Tite hitches the Curt for your 2016 Porsche Cayenne part #C13116 is the way to go. Curt hitches tend to have the edge in build quality consistency and also they have a more durable powder coat as well. It's a pretty big…

view full answer...

Which Trailer Hitch Receiver Fits A 2013 Porsche Cayenne?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching