WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step for 2" Hitch - 300 lbs

Part Number: WT81BS1XL

In Stock

$118.90

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

weathertech hitch step fixed smooth bumpstepxl hitch-mounted bumper protector and for 2 inch - 300 lbs

weathertech hitch step fixed 300 lbs bumpstepxl hitch-mounted bumper protector and for 2 inch -

weathertech hitch step fixed 24 inch wide

weathertech hitch step smooth 300 lbs wt81bs1xl

weathertech hitch step fixed 24 inch wide bumpstepxl hitch-mounted bumper protector and for 2 - 300 lbs

weathertech hitch step 300 lbs 24 inch wide wt81bs1xl

weathertech hitch step fixed 300 lbs wt81bs1xl

weathertech hitch step smooth 24 inch wide wt81bs1xl

Show All (11) Product Images

Show Fewer Product Images

In Use/Installed

0 hitch step weathertech smooth 300 lbs in use

0 hitch step weathertech smooth 24 inch wide wt81bs1xl

0 hitch step weathertech fixed 24 inch wide in use

0 hitch step weathertech fixed 300 lbs bumpstepxl hitch-mounted bumper protector and for 2 inch -

0 hitch step weathertech smooth 300 lbs wt81bs1xl

Show All (5) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step for 2" Hitch - 300 lbs customer photo

Show All (4) Customer Images

Show Fewer Customer Images

Videos

WeatherTech BumpStepXL Hitch-Mounted Bumper Step Review

WeatherTech Hitch Step - Fixed Step - WT81BS1XL Review

Show All (2) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Simply guard against bumps, dents, and scratches to your vehicle's bumper or safely stand on this rugged step to load a roof rack. Slides into your 2" trailer hitch receiver. 1-800-940-8924 to order WeatherTech hitch step part number WT81BS1XL or order online at etrailer.com. Free expert support on all WeatherTech products. Great prices and Fastest Shipping for WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step for 2" Hitch - 300 lbs. Hitch Step reviews from real customers.

All Info
Reviews (85)
Q & A (0)
Related Parts
Photos

WeatherTech Hitch Step - WT81BS1XL

Simply guard against bumps, dents, and scratches to your vehicle's bumper or safely stand on this rugged step to load a roof rack. Slides into your 2" trailer hitch receiver.

Features:

Sturdy step gives you quick, easy access to the rear of your truck or SUV
- Makes it easy to climb into and out of your truck bed or to reach your SUV's roof rack
- Provides sure footing with large, anti-slip surface
Acts as a bumper guard - helps protect against bumps and scratches
Composite resin stands up to the sun's harsh rays for a long life
Matte black finish delivers a rugged look
Simple installation - step slides into your 2" hitch receiver
Includes installation instructions and required hardware
Made in the USA

Specs:

Application: 2" x 2" trailer hitch receivers
Weight capacity: 300 lbs
Dimensions: 24" long x 3-1/2" tall
Limited lifetime warranty

81BS1XL WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step for 2" Hitch - 300 lbs

Customer Satisfaction Score:

95% were satisfied with this product

5% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered

5% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered

4.6

85 reviews

5 Stars		(65)
4 Stars		(12)
3 Stars		(3)
2 Stars		(1)
1 Star		(4)

by: Bill 02/22/2019

My wife wanted something that would help her step into our Travato motorhome via the back door. It's built on a RAM Promaster and entering through the back doors requires a pretty good step up to get in.

When I saw the BumpStep, it looked like it would make getting in easier, so I figured I'd give it a try.

It arrived this morning, took about five minutes to install using the included hardware and it works even better than expected.

The only thing you need to install is a 15/16" socket. The step is super sturdy and makes it so much easier to step in and out of the van through the back doors.

Would highly recommend.

Click to Enlarge

Bill M. One Year Later

2/23/2020

Great - very sturdy, still like new after a year in the weather

by: Marilyn 10/02/2026

Looks great! Just a safety plan for the parking lots

by: Tom 06/26/2026

Great product but one week to get item when it was advertised that I would receive item in three days. Was to be a Father’s Day present.

by: Cynthia 02/01/2019

Very easy install but wish there was option available through etrailer for the security bolt.. bolt makes world of difference so there is no rattle.

Click to Enlarge

by: Thomas 03/04/2026 One Year Later

Great protection for the tailgate for those who don't pay attention to their distance. Must be working because there are no new dents on the tailgate. Also provides a good step up for this old body.

by: Blair 10/22/2022 One Year Later

Great step and I was super impressed by the strength it has. I was rear-ended by a big F350 truck and this step went right through the F350's bumper and grill and cracked the engine block, and the step stool looks new hahaha.

by: NativeYUMAN in AZ 04/30/2021 One Year Later

Used primarily for protection from minor front end collision. Nothing to report as yet. We also have our truck protected with WeatherTech floor mats.

by: Tammy 12/15/2018

A Christmas Gift that came in the original packaging with the picture and name of the item...the UPS man handed to my husband...Fail on the Christmas gift!

Click to Enlarge

by: CWebb 01/03/2025 One Year Later

Love this step. It helps me get onto the roof rack and also provides protection for the rear bumper.

by: Mike 08/21/2020 One Year Later

This is a great way to utilize a hitch receiver when you're not towing or using it for something else. Makes it super easy and comfortable to get in and out of my Sprinter van.

by: Tom 11/03/2018

IT IS WELL BUILT AND LOOKS GOOD. BUT I STILL RETURNED IT BECAUSE IT GOES ON A NEW 2019 JEEP GRAND CHEROKEE WHICH CAME EITH A 7000 lb hitch. . I DID NOT BOLT IT ON BUT BECAUSE OF ITS HEIGHT, IT WOULD BE IMPOSSIBLE FOR MY WIFE TO STAND ON IT. ME ALSO, TO HIGH
ALSO QUICKLY LEARNED THAT THERE ARE ZERO HAND HOLDS AT THE REAR OF THE JEEP. ONLY THING IS A WIPER BLADE. NOT A GOOD IDEA TO GRAB THAT.
It appears to be super strong etc.

by: Victor 08/28/2025 One Year Later

As advertised! worth it!

by: Tom 10/21/2025

Looks great and fits as expected.

by: Floyd 08/22/2022

The one I purchase is to long and restricts my rear camera when self parking is involved. I should have gotten the shorter bump step.

by: James 12/09/2018

Fits perfectly since it has multiple mounting holes. Non skid coating seems to work very well, even when wet. It comes with a bolt in case you don't want to use your own pin. I leave mine installed, so I didn't used the supplied bolt, but rather my old locking pin.

by: John 01/26/2022

I bought one last April and it came with an Allen bolt and wrench. This combo makes it difficult to steal it. The one I just received has a standard bolt which is easily removed with an adjustable wrench. I am not happy with this arrangement.

Jenny N.

1/26/2022

I do not have an option of offereing a lock on this step however we do carry a hitch step that is lockable. It would part # GY79VR which is lockable with an anti-rattle lock part # GY39FR.

by: Glenn 11/12/2021

I was surprised to find out the receiver insert section was made of plastic, the functionality of and quality of BumpStep is nice but not sure how it would hold up as a bumper protector.

by: Frank 01/15/2023

With a little filing work, thankfully it’s made of plastic, the BumpStep fit my receiver tube and it’s great, super easy to get in my flatbed, thanks

by: CNM 04/05/2023

This WeatherTech bump step is a great product for stepping into rear of truck and protect the rear bumper from minor bumps.

by: Maria 03/20/2021

Click to Enlarge

by: Josh 04/02/2022

quick shipping, new product with all parts. thanks!

by: Dee 05/02/2024

It is all plactic with medal inserts where the holes are that the hitch lock goes through. The bolt they sent was to short. Just a peice of junk for $[XX] bucks. It will not last long.

by: Harvey 09/07/2018

This will solve the problem of having no rear bumper on my diesel pusher in case of a rear hit that would take out my radiator.

by: Theresa S. 02/14/2019

We have not used product as of this time (weather). The original transaction was efficient and straightforward. Information was precisely what I needed, and was delivered before promised date. Product is to assist owner to reach roof, for removing snow &ice, and protecting rear of vehicle.

by: Randy 05/09/2020

Great product. Fit perfectly on our Sprinter 3500. Gives a nice step up to rear doors.

true

Show More Reviews

See what our Experts say about this WeatherTech Hitch Step

Do you have a question about this Hitch Step?

Will WeatherTech BumpStepXL Hitch-Mounted Bumper Protector Interfere with Reverse Sensors or Camera
The WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step for 2" Hitch part # WT81BS1XL should not interfere with the backup camera or reverse sensors on a vehicle. We aren't able to test this for every vehicle obviously but in most cases, it does not stick out far enough to affect either the backup camera or reverse sensors. If you need helping reaching items on the roof of the vehicle, this is the perfect step for you that will make this task much easier. Please note, the step...
view full answer...
Hitch Step/Bumper Guard that Can Fit 1-1/4 inch Trailer Hitch
The most similar bumper step we have to the part # WT81BS1XL that fits a 1-1/4 inch hitch would be the Bully Black Bull Hitch Step part # BBS-1104L which has ability to fit both a 2 inch and a 1-1/4 inch hitch.
view full answer...
Front Mount Trailer Hitch Receiver for a 2017 Ram 2500 Power Wagon
The Curt Front Mount Trailer Hitch Receiver # C31015 will fit your 2017 Ram 2500 Power Wagon. I have included an image below of this receiver installed on a Power Wagon so you will be able to see how it will fit. It mounts below the winch so you will not have any issues with that. As you mentioned the brush guard I would need to know exactly what brush guard you have to determine if it will be an issue as I do know it will fit with some units but can't say for sure what all will fit. I...
view full answer...
Front Mounted Trailer Hitch Receiver For a 2021 GMC AT4 with 3.0L Duramax Diesel Engine
The Draw-Tite Front Mount Trailer Hitch Receiver # DT44HR is confirmed to fit your 2021 GMC Sierra 1500 with the 3.0L diesel engine. This receiver is rated for a vertical load up to 500lbs and a line pull rating of up to 9,000lbs. This Draw-Tite uses different mounting points than the Curt # C31088 that you installed on your 2019 Trailboss. The Curt will not fit the 3.0L Duramax or 2.7L Turbo Gas engine due to the intercoolers. I recommend using the WeatherTech BumpStepXL # WT81BS1XL...
view full answer...
Curt Front Mount Trailer Hitch Receiver Cutout For a 2021 Ram 1500 Big Horn Built to Serve Edition
The Curt Front Mount Trailer Hitch Receiver # C87FR will fit your 2021 Ram 1500 Big Horn Built to Serve edition truck. It will require you to trim out a 2.5" x 2.5" section of your lower fascia panel. I have included an image to show what must be trimmed. The WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL is great to fill the receiver hole. It will help protect your front bumper and provide the additional step to access under your hood.
view full answer...
Front Mount Trailer Hitch Receiver Which Fits a 2023 Ram 3500 Diesel
Yes, the EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH37FR is confirmed to fit your 2023 Ram 3500 with the diesel engine. This will require trimming of the lower front fascia below the bumper so you will not have to worry about any loss of front ground clearance or approach angle. The WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL I find is a great add on for the front receiver. This will help protect the front portion of your bumper from hitting...
view full answer...
Front Mount Trailer Hitch Receiver For a 2016 Ford F-150
For your 2016 Ford F-150 with the 5.0 V8 you will need either the Curt Front Mount Receiver # C31083 or Draw-Tite Front Mount Receiver # 65067. The EcoHitch # 306-X7904 that you found only fits the 2017-2022 Ford F-250/F-350. I recommend the Curt Front Mount Receiver # C31083 as it is rated for up to 500lbs of vertical weight, 9,000lbs of line pull capacity and will allow you to move a trailer up to 5,000lbs. The Draw-Tite is not rated for moving trailers with the receiver. The Draw-Tite...
view full answer...
Hitch Step - Sensor/Camera Interference ON A 2021 Toyota Tacoma?
If you have ever put a ball mount in your hitch on your 2021 Toyota Tacoma and there was no interference, then you will be fine to use the BumpStep XL # WT81BS1XL. You will be able to see it in your rear view mirror, but it will not block a large part of your view because it's 24" long x 3-1/2" tall. This will be nothing compared to a bike rack or cargo carrier. If you want to make sure it will not interfere, go with this one # CARR190011B. This folds up so you don't have to remove it every...
view full answer...
Recommended Front Mount Trailer Hitch Receiver For a 2021 Ram 3500 Dually
I recommend the EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH37FR for your 2021 Ram 3500. This 2" receiver is rated for a vertical load up to 1000lbs, trailer weight of 3,500lbs, and a line pull of 10,000lbs. This receiver will include a front mount license plate bracket since it mounts where the factory plate sits. A etrailer Trailer Hitch Receiver Lock # e98880 will better secure this in your receiver. If you do not require a plate the WeatherTech BumpStepXL Hitch-Mounted...
view full answer...
Front Mount Trailer Hitch Receiver For a 2020 Ram 2500 Diesel With Parking Sensors
You will need the EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH37FR for your 2020 Ram 2500 Diesel with the parking sensors. The EcoHitch # 306-X7900 only fit up to the 2010-2018 model years. This hitch will included a license plate bracket if your state requires you to always have a front license plate visible at all times. Otherwise I like using the WeatherTech BumpStepXL # WT81BS1XL as it will protect the bumper and makes accessing under the hood much easier.
view full answer...
Front Mount Trailer Hitch Receiver For a 2020 Ford F-450 Cab and Chassis Work Truck
The Draw-Tite Front Mount Trailer Hitch Receiver # 65049 is confirmed to fit your 2020 Ford F-450 cab and chassis. It has different mounting points than the Draw-Tite Receiver # 65076 that you were looking at. I recommend keeping either a Cover # 63080 or Step # WT81BS1XL in the receiver to eliminate the whistle from the wind front receivers will often create. The step is great as it allows you to easily access under the hood if you do your own service work or run into issues on the road.
view full answer...
Front Mount Trailer Hitch Receiver For a 2009 Jeep Grand Cherokee
The Curt Front Mount Trailer Hitch Receiver # C31047 is currently the only front receiver we carry for your 2009 Jeep Grand Cherokee. This receiver is rated for a tongue weight of up to 300lbs which should be more than enough for your fishing rods and cooler rig. I recommend a Hitch Cover # 22282 or Hitch Step # WT81BS1XL be kept inside the receiver when not in use. This will eliminate the whistle that front receivers will often produce on the empty receiver.
view full answer...
Front Mount Trailer Hitch Receiver For a 2022 Ford F-350 Dually
The EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH83GR will fit your 2022 Ford F-350 Dually with the 7.3L gas motor. This is a new receiver from EcoHitch that was specifically made to fit your Dually. This receiver has a 2" square opening with a 1,000lb tongue weight rating, and 10,000lb trailer and line pull rating. The EcoHitch receiver will come with a license plate bracket or you can use a WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL if you are...
view full answer...
WeatherTech BumpStep for 2 Inch Hitch Receiver
We carry the WeatherTech BumpStep Hitch-Mounted Bumper Protector and Step for 2" Hitches # WT81BS1 and recently added the BumpStep XL # WT81BS1XL which has a 24 inch length versus the 12 inch length.
view full answer...
Front Mount Trailer Hitch Receiver For a 1990 Ford Ranger XLT 2WD
Yes, the Draw-Tite Front Mount Trailer Hitch Receiver # 65017 will fit on your 1990 Ford Ranger XLT 2wd truck. This receiver will fit all trims and drivetrains for the 1990 Ford Ranger. Since this mounts in the same area as the license plate you can use the Front Mount Trailer Hitch License Plate Relocation Bracket # 5443 if you are required to have a front license plate. I like using the WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL. This helps to prevent...
view full answer...
List of Available 2" Hitch Mounted Steps
It sounds like you might be looking for a hitch mounted step. If that is the case we do have several options for this, like the WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step part # WT81BS1XL you mentioned. I have attached a full list of options below.
view full answer...
Front Mount Trailer Hitch Receiver For a 2021 Chevy Silverado 2500 with Factory Snow Plow Package
The EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH57FR will fit on your 2021 Chevrolet Silverado 2500 if it came with the factory snow plow prep package. If your using an aftermarket plow mount you will need to check to ensure it will not interfere with the mounting points for the EcoHitch(see install video below). If you let me know what aftermarket plow setup you have I can confirm if you will run into any interference with this receiver. I recommend using a Hitch Cover # 22282...
view full answer...
Is Skid Plate Removal Required To Install Draw-Tite Front Trailer Hitch Receiver 2017 4Runner SR5?
If your 2017 Toyota 4Runner SR5 has one of the TRD front skid plates it will need to be removed to install the Draw-Tite Front Mount Trailer Hitch Receiver # 65074. I recommend using the WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL to keep in the receiver when you are not using it. This will help to protect your front bumper and give you a nice step for working under the hood of your 4Runner. It will also eliminate the whistle that is often caused by the...
view full answer...
Front Mount Trailer Hitch Receiver Compatible With 2022 Ram 1500 Bighorn Without Tow Hooks
The Curt Front Mount Trailer Hitch Receiver # C87FR is confirmed to fit on your 2022 Ram 1500 Bighorn. This hitch is only compatible as long as you do not have the front factory tow hooks. It is rated for a tongue weight up to 500lbs with a maximum trailer weight of 5,000lbs or a line pull or 9,000lbs. Do be sure to get a cover like the Draw-Tite QSP Trailer Hitch Silencer and Cover # 63080 or I prefer to use a WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL...
view full answer...
Front Mount Trailer Hitch Receiver For a 2006 Forest River Lexington 255DS E-450 RV Cutaway Chassis
The Curt Front Mount Trailer Hitch Receiver # 33055 is confirmed to fit the Ford E-450 RV Cutaway chassis that is under your 2006 Forest River Lexington 255DS. I recommmend using either the etrailer Rubber Hitch Cover # 22282 or WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL to fill the receiver hole and eliminate the whistle it often creates. The step is great as it will give you that added reach when cleaning your RV.
view full answer...
Compatability Of EcoHitch Front Mount Receiver On a 2021 Ford F-350 Tremor Edition
The EcoHitch Hidden Front Mount Trailer Hitch Receiver # 306-X7904 will fit your 2021 Ford F-350 Super Duty Platinum with the Tremor package. The only models it will not fit are those that come with the dual rear wheels. As the Tremor Package is only available in a single rear wheel chassis it will fit your F-350. This receiver is capable of supporting 1,000lbs of tongue weight, moving a trailer up to 10,000lbs and using a winch with a line pull up to 10,000lbs. The WeatherTech BumpStepXL...
view full answer...
Easiest Front Mount Trailer Hitch Receiver For a 2003 GMC Sierra 1500 SLT
I recommend the Curt Front Mount Trailer Hitch Receiver # 31302 for your 2003 GMC Sierra 1500 SLT extended cab with the 6.5' bed. This is our easiest front receiver to install as the frame mounting brackets are separate from the receiver cross tube. I have linked an installation video below for you to see where the brackets mount. I like using the WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL with the front mounted receiver as it makes it much easier when I...
view full answer...
Hitch Bumper Guard that Can be Used with GM Trailer Hitch # 22956689
The GM 2 inch hitch part number 22956689 that you have would work great with the bumper guard part # WT81BS1XL that you referenced.
view full answer...
Will The Curt Front Mount Trailer Hitch Receiver C31078 Fit a 2023 Ford F-250 With Tremor Package?
Yes, the Curt Front Mount Trailer Hitch Receiver # C31078 is confirmed to fit your 2023 Ford F-250 with the Tremor package. The installation will require some trimming of your front fascia. I recommend using the WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL with the receiver. This will help protect you from damaging the lower front portion of your bumper on objects while also providing a helpful step to get under your hood for checking fluids and fuses.
view full answer...

Do you have a question about this Hitch Step?

Info for this part was:

Edited by:

Leah B

Expert Research:

Jameson C

Video by:

Dustin K

Installed by:

Cole B

Installed by:

David F

Video Edited:

Chris R

Updated by:

Wilson B

Updated by:

Erin H

Written by:

Ronnie R

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.