Installation Instructions and Fascia Trimming for the Draw Tite Hitch part # 75950

Question

Question:

The link to the Installation Instructions for the Draw-Tite hitch does not link to a document. Im particularly interested to see what type of Facia Trimming is required during the installation process for this hitch.

asked by: Daryl H

0

Expert Reply:

I attached a couple pictures that I took from the install instructions for the part # 75950 that you referenced.

According to the instructions the only fascia trimming that would be required would be if you installed the hitch on a Touareg.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The correct Draw-Tite Trailer Hitch for your 2013 Porsche Cayenne is the Draw-Tite #75950 and is a great cost effective option that fits nearly the same as the Curt Trailer Hitch #C13116 you mentioned. Between these two hitches I would go with…

view full answer...

Answer 2

Yes, the Curt Trailer Hitch Receiver part #C13116 has been tested and is a confirmed fit for your 2018 Porsche Cayenne E-Hybrid. This is a Class III hitch with a 2" receiver tube opening. It is made in the U.S.A. and comes with a lifetime…

view full answer...

Answer 3

For your 2016 Porsche Cayenne I recommend trailer hitch #75950 because it does not require a strap when using the hitch with your bike rack. The Curt hitch #C13116 does have this requirement but it is the only one of the hitches for your Cayenne with…

view full answer...

Answer 4

For your 2018 Porsche Cayenne I recommend the Draw-Tite Class III Max Frame Receiver Hitch #75950. Both this hitch and the Curt #C13116 that is also available for your vehicle feature similar designs and identical weight capacities (7,500 pounds…

view full answer...

Answer 5

Between the Curt and Draw Tite hitches the Curt for your 2016 Porsche Cayenne part #C13116 is the way to go. Curt hitches tend to have the edge in build quality consistency and also they have a more durable powder coat as well. It's a pretty big…

view full answer...

Answer 6

I am not 100 percent sure what you are asking in regards to plugging into the factory connector but I can tell you that there are two connectors that will fit your 2013 VW Touareg, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector…

view full answer...

Answer 7

The wires to install the Prodigy P3 #90195 are indeed already run and under your dash. I have added a link to an installation video showing exactly how to install this brake controller in a 2011 GMC Sierra like yours. On the Prodigy the blue wire is…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Installation Instructions and Fascia Trimming for the Draw Tite Hitch part # 75950

Continue Researching