Would Trailer Hitch for 2001 Mazda B3000 Truck Also Fit 1996 Model

Question

Question:

Would a 2001 mazada tow hitch assemply fit my mazda 1996 B3000

asked by: Ray

0

Expert Reply:

The hitches we carry for the 1996 Mazda B3000 like the Curt # 13138 fit models from 1994 to 2010 so yes a hitch from a 2001 would also fit a 1996 model.

expert reply by: Jameson C

0

Answer 1

For your 2004 Ford Ranger with a full size spare and stepside bed, I recommend the Curt Class III Round Tube Receiver Hitch #13138. This is a Class III trailer hitch that will provide a 2 inch receiver opening with a 400 pound tongue weight capacity…

view full answer...

Answer 2

The difference between the Curt Class III Receiver Hitch part #13019 and the Curt Class III Receiver Hitch part #13138 is strictly aesthetics. The square tube option is a bit more cost effective and it matches the body lines on your 1992 Ford Ranger…

view full answer...

Answer 3

It is difficult to identify what hitch fits just by looking at the holes in the frame. However, I can tell you that the Curt Trailer Hitch Receiver #13138 is confirmed to fit your 2004 Ford Ranger Edge. This is a Class III hitch with a 2"…

view full answer...

Answer 4

For your 2007 Ford Ranger, I'd recommend the Curt Class III hitch, part #13019. This hitch is reasonably priced, but still provides a full 4000 lb towing capacity/ 400 lb tongue weight capacity. The Curt Class 3 hitch part #13088 is a fit for the…

view full answer...

Answer 5

Hello Andrew, thanks for reaching out, and congrats on the new car! For the 2026 Hyundai Tucson Hybrid you will need the following wiring harness: - Curt T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector #C28DQ This will fit all…

view full answer...

Answer 6

Hey Eric. The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package item #C44FR fits the following vehicles: 2025 - 2026 Chevrolet Equinox 2025 - 2026 Chevrolet Equinox excluding Diesel 2025 - 2026 Chevrolet Equinox with factory Tow Package…

view full answer...

Answer 7

I recommend Curt Class III Round Tube Receiver Hitch part #13138 to fit the 2007 Ford Ranger with 16 inch spare tire. The Curt Trailer hitch is designed to fit around the spare tire and the installation does not require the spare tire to be removed…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Would Trailer Hitch for 2001 Mazda B3000 Truck Also Fit 1996 Model

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching