Product Experts Available Now!
Call 1-800-940-8924
Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs
(175 reviews)
Price: $1,625.90
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs
Part Number: TH43003XT-510
In Stock
$1,625.90
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (175)
- Q & A (0)
- Photos
Thule Ladder Racks - TH43003XT-510
Highlights
- Custom Fit for Your Vehicle: Installs with hardware that attaches to your truck's bed rails or stake pockets
- Sliding Rack System: Adjusts along T-track rails to fit ladders, kayaks, and long loads.
- Strong Carrying Capacity: Handles up to 1,250 lbs without stressing the truck bed.
- Tool-Free Removal: Quick-release knobs let you slide or remove uprights in seconds.
- Rustproof Aluminum Build: 6000-series aluminum with dual powder coat resists corrosion.
- Secure Tie-Downs: Includes 4 load stops and 4 side cleats to keep cargo firmly in place.
Features to know about
Adjustable Rack for Work or Play: Slides the Full Length of the Bed
The Thule TracRac SR Sliding Truck Bed Ladder Rack lets you move the uprights anywhere along the bed using its built-in T-track base rails. The design slides smoothly to carry long boards, ladders, or short cargo without being locked into one position. Quick-release knobs loosen and tighten by hand, so you can reposition or remove the rack whenever you need full bed access. With a 1,250-lb carrying capacity, it’s ready for heavy loads whether you’re hauling tools for work or kayaks for a weekend trip.
Streamlined Strength: 6000-Series Aluminum with Dual Powder Coat Finish
This rack is built from 6000-series aluminum, giving it a strong and durable frame that won’t rust. The dual-stage powder coat finish—an e-coat followed by a clear coat—adds extra protection against scratches and corrosion. The lightweight construction also means more of your truck’s capacity goes to the load instead of the rack.
Quiet and Aerodynamic: Elliptical Crossbars with Trip Strips
Each crossbar has an aerodynamic, elliptical shape that cuts through the wind to reduce drag and noise. Airfoil trip strips at the front of the bars keep air from whistling through the slots, so you get a quieter ride even with the rack mounted. The streamlined design helps improve overall efficiency and keeps the truck looking clean and finished.
Secure Cargo Management: Load Stops and Side Cleats Included
Four heavy-duty aluminum load stops slide inside the crossbar channels to hold ladders, lumber, or other long gear firmly in place. Each has built-in loops for tie-down straps. Four side cleats attach to the uprights to anchor extra straps or secure items in the bed. The combination gives you multiple tie-down points and quick adjustability for different gear sizes.
Simple, No-Drill Mounting: Stake-Pocket Installation with Wide Bases
The TracRac SR installs through the stake pockets, so no drilling is required. The wide bases on the uprights add stability without extra bracing, keeping the rack solid even under heavy use. When not needed, the rack sections can slide together at the front for unobstructed bed access and better aerodynamics.
Specs
Carrying capacity: 1,250 lbs
Crossbar length: 69-1/2"
Rack height (with base rails): 32-11/16"
Material: 6000-Series aluminum with dual-stage powder coat finish
Includes 4 load stops and 4 side cleats
Specs
Weight and Capacity
- Carrying capacity: 1,250 lbs
Dimensions
- Crossbar length: 69-1/2"
- Rack height (with base rails): 32-11/16"
Warranty
- Limited lifetime warranty
43003 Thule Track Rack SR Sliding, Truck Bed Rack
21510 Thule Track Rack Base Rail SDS - Short Bed Ford Super Duty Trucks
Replaces TracRac TA21510-03
Alternate Instructions
This Product Fits The Following Vehicles
- 1999 - 2016 Ford F-250 Super Duty 6-3/4 Foot Bed
- 1999 - 2016 Ford F-350 Super Duty 6-3/4 Foot Bed
Ratings & Reviews
4.6
175 reviews
by:
Sandy
08/11/2022
Delighted. Very strong, good looking. The only drawback is that the screws which keep the racks on the tracks can be easily removed and the racks stolen. They should provide screws with security heads. I installed my own... but they began to rust immediately.
by:
John
03/04/2023
fast friendly. service. shipped and received in a couple days. was a pleasure doing business with you and I'd refer you guys to all.
by:
Rosendo E
09/14/2022
by:
Juan Pablo
10/13/2025
2026
GMC
Sierra 1500
Great product as it was promoted. Also good quality and strong. I’m using it to add to my rack.
by:
Louis
11/04/2025
2018
Ford
F-150
I bought my first Thule TracRac in 2018 and loved it for its crisp style, robust integrity and ease of removal so in 2025 when I bought my next F-150 Lariat I bought the same Trac Rac again. It's a wonderful design. Pro-tip, get the BAK industries tonneau cover too, they fit together perfectly. Amazing!
Mike L.
11/4/2025
That's awesome, Louis! Great advice on the BAK cover....
by:
Jake
11/21/2025
2018
Mercedes-Benz
Sprinter 2500
I move a lot of material for work. This rack seems very well constructed, very easy to put together and install. Being able to adjust the racks and slide them completely out of the way was reasoning to purchase this exact unit. I also tow a gooseneck trailer and need full access to the bed of my truck. Great product that functions and looks nice on a black truck with chrome trim package.
Nick S.
11/24/2025
That is great to hear! I am glad the installation was a breeze and it works well for your application. What do you do for work hauling that material around?
by:
Chris
07/20/2015
2010
Dodge
Ram Pickup
Couldn't be happier with the Rack, it went together and operates flawlessly. Dealing with e trailer was a snap, I was informed all the way through the buying process of shipping and arrival dates. Will absolutely buy shop again with e trailer.
Chris
8/5/2016
Im as happy today as I was the first day that I had the Rack. Its agreat product!!
by:
Jim
04/18/2024
We've been really happy with the Thule Sliding TracRac, and have made some unusual modifications. We wanted to mount it outside/around a camper shell, so we needed to mount the rails outboard of the truck bed (aluminum "shelves") and figure out how to make the crossbars longer (bought a third crossbar and connected extension sections by making three-holed t-slots nuts and using round aluminum tubes). None of this sanctioned by etrailer or Thule, of course. See photos, which also show an adaptor I made to mount a Thule square bar above the TracRac crossbar to use existing Thule accessories.
by:
Chris
02/18/2025
2023
Ford
F-350 Cab and Chassis
Ordered this rack for my 2023 Ford F350 super duty long bed, even when being told it was on a 2-3 month backorder the sales team kept me updated throughout the whole process. I actually received this order 1 month ahead of original schedule and it fit perfectly on my truck. Everything lines up perfectly fine minimum tools where required and looks great.
Brooke M.
2/20/2025
Thanks for sending in the photo, it looks great! Is this a work truck? Its a really cool feature how youre able to slide the bars up like that.
Brooke M.
2/20/2025
@Chris Thats awesome! Ill have to double check the fitment on this and possibly make an update to what should be listed! What do you do for work? I used to work for a very tall house painter who probably would have loved to be able to scoot the bars up when they werent being used. Im only about 5 ft 6 and still would hit my head from time to time, haha
by:
Tim
12/15/2023
Pontiac
Trans Sport Van
Past 20 years I've used Rack-It truck racks. They're solid steel, eventually rust and took two grown men (and an extra set of nuts) to remove them from the truck. Great racks. Just way more than what I need the older I get.
However I wanted something that could easily be removed (by myself), if needed, and was aluminum. I bought these, as well as the extension cantilever, and it serves my needs as a general contractor. It supports my 24' walk plank just fine. The only thing I have to be creative to transport is full length rebar. If I transported rebar all the time, this rack would not be my first choice.
At the time of my purchase, there was not a specific rack for my GMC AT4. So I simply measured the bed of the truck, bought one with a similar measurement, and modified the drilling holes to work.
Lastly, I didn't want a silver color rack on my black truck. While you could get the racks in black. You could not purchase a black cantilever. So I simply had all the pieces powder coated black.
Honestly, I get a lot of compliments on it. Because no one else has one like it.
I'm very happy with it. It's perfect for the occasional ladder, walk plank, or 16' piece of lumber. I've had it mounted for over a year now, with zero problems! I remove it weekly to go through the car wash, and throw it back on in 5 min or less when i get home.
However I wanted something that could easily be removed (by myself), if needed, and was aluminum. I bought these, as well as the extension cantilever, and it serves my needs as a general contractor. It supports my 24' walk plank just fine. The only thing I have to be creative to transport is full length rebar. If I transported rebar all the time, this rack would not be my first choice.
At the time of my purchase, there was not a specific rack for my GMC AT4. So I simply measured the bed of the truck, bought one with a similar measurement, and modified the drilling holes to work.
Lastly, I didn't want a silver color rack on my black truck. While you could get the racks in black. You could not purchase a black cantilever. So I simply had all the pieces powder coated black.
Honestly, I get a lot of compliments on it. Because no one else has one like it.
I'm very happy with it. It's perfect for the occasional ladder, walk plank, or 16' piece of lumber. I've had it mounted for over a year now, with zero problems! I remove it weekly to go through the car wash, and throw it back on in 5 min or less when i get home.
by:
Robert B.
09/20/2019
Very happy with the rack on my 2018 Silverado. I also have the Back flip hard top bed cover. I am able to open all but the very last position. I might still be able to adjust the rails and to get there but it hasn't been an issue. Used it to haul lumber and I made a bicycle rack that works with the racks and the bed cover down. Works great. Was not hard to install.
by:
Don A
09/24/2017
2018
Dodge
Ram Pickup
Well made product and pretty clear and straight forward install. This was installed on top of a Retrax Pro Bed Cover with stake bed cutouts and no Ram box for a 2018 Dodge Ram 2500.
Only negative comment was the kit was short 2 end bed rail caps.
Just to be clear, this is somewhat uncharted territory as there isn't any info I could find on the compatibility of the Trac Rac with the Retrax Pro bed cover. Worked out very well and no modifications were necessary otjer than cutting out the factory bed pocket cutouts in the RAM truck itself.
Highly recommend the combo!
Only negative comment was the kit was short 2 end bed rail caps.
Just to be clear, this is somewhat uncharted territory as there isn't any info I could find on the compatibility of the Trac Rac with the Retrax Pro bed cover. Worked out very well and no modifications were necessary otjer than cutting out the factory bed pocket cutouts in the RAM truck itself.
Highly recommend the combo!
by:
Harry W
04/13/2022
etrailer.com is an outstanding company. I purchased a Thule system in January. Due to logistics (my fault) I tried to install the system in April. Three of the attachment arms were incorrect. I contacted Ashley of etrailer, the sales representative who sold me the system, who patiently listened and after receiving the needed photos and explanation, etrailer sent me a replacement system. The new system was installed and the truck is ready to go. Ashley's professionalism, communication skills, product knowledge were excellent. Ashley and etrailers' commitment to solving my issue expeditiously puts etrailer in a class by itself.
by:
Michael R.
10/01/2017
2016
Nissan
Titan
In short: the sliding ladder rack is excellent.
Assembly: Plan on spending a good while assembling it, and make sure you have a decent torque wrench and ALSO a strong set of allen head sockets, so you don't round out cap screws. Be triple sure you have the top and bottom of the crossbars correct before attempting assembly.
Usability: other reviews have spoken to all of this, but for me: the carrying capacity mixed with ease of adjustment and removal. It also happens to look incredibly sexy, when installed on my 2016 Nissan Titan XD (and with the TracRac cantilever extension installed).
Assembly: Plan on spending a good while assembling it, and make sure you have a decent torque wrench and ALSO a strong set of allen head sockets, so you don't round out cap screws. Be triple sure you have the top and bottom of the crossbars correct before attempting assembly.
Usability: other reviews have spoken to all of this, but for me: the carrying capacity mixed with ease of adjustment and removal. It also happens to look incredibly sexy, when installed on my 2016 Nissan Titan XD (and with the TracRac cantilever extension installed).
by:
Eric K
09/30/2020
Very heavy duty ladder rack that does not "whistle" while you drive down the road. Easy install overall, and it is very easy to install and remove the racks as needed after the original install. At the time of purchase this was not available for my vehicle with a short 5.5' bed, but with very minor fabrication the rails for longer beds fit perfectly. I have recommended this rack to several people since purchased a year ago.
by:
Jim H.
05/06/2017
2015
Chevrolet
Silverado
I am very happy with the quick processing and shipping of my TracRac from etrailer. The TracRac is well made and the instructions were good. It fit my 2015 Chevy Silverado 2500HD well. I was able to use it with my bakflip F1 tonneau cover but the seals rub against the rack rails. The only reason I did not rate it at 5 stars was that one of the rack arms had the center pipe in backwards. I had to spend 20 minutes removing it and turning it around to install correctly. It looks great on the truck and is very sturdy. The racks slide easily on the rails so I can adjust them to fit whatever I am carrying. It also allows me to slide the rear rack all the way back so I can open the bacflip tonneau cover without it hitting the rack arms.
by:
Jeff N
07/10/2017
2016
Toyota
Tundra
This is a great product and works really well with the Bak RevolverX2 Tonneau cover.
The only reason I didn't give it a 5 was because the base track has about a 3/4" overhang at the rear of the bed rails. Unfortunately the bed rails of the 2016 Tundra Double Cab are not square. As you can see from my photos, the front fits flush while the rear hangs over. Besides that, they are very sturdy and installation was simple.
Knowing what I know now, I would still buy this product again.
The only reason I didn't give it a 5 was because the base track has about a 3/4" overhang at the rear of the bed rails. Unfortunately the bed rails of the 2016 Tundra Double Cab are not square. As you can see from my photos, the front fits flush while the rear hangs over. Besides that, they are very sturdy and installation was simple.
Knowing what I know now, I would still buy this product again.
by:
Mark WHI
09/23/2019
Great product! Packaging could be better for the larger pieces (rub marks). My 2018 Ram 1500 quad cab came with some small challenges that I had to solve myself. No videos or written words available. Basically if your bed rails are covered with a bed liner you need to remove the plastic sleeve in the rear stake pockets. Otherwise you won’t get an equal spacing from one rail to the other. You will also need to use the provided rubber tape with the wedges in order to make the rails level. Otherwise it went together great.
by:
Christian
11/24/2021
I did install the Thule TracRac SR. I did it on my own and it went well.
I'm really pleased with it.
As for the photo, I will send you one, once I've washed my truck.
Can't make a photo with a dirty truck.
I will leave feedback later after some time with the rack.
I'm really pleased with it.
As for the photo, I will send you one, once I've washed my truck.
Can't make a photo with a dirty truck.
I will leave feedback later after some time with the rack.
by:
Manny
08/27/2022
2018
Toyota
Tundra
I searched many ladder racks I was unsatisfied till I found this one. It’s beautiful it’s light and it’s versatile. I have a X-short bed Toyota Tundra platinum with a top. With this ladder rack I was able to keep my topper.
by:
BurningDaylight
03/17/2023
Just installed this last night sobs true rating is hard to do. With that said it is definitely good quality very tight with no wobble! Hope it works like I want with removal for trips and going through the car wash. Keeps the truck looking pretty sharp compared to the traditional ladder racks!!
by:
Timmy L
08/02/2017
2017
Ford
F-150
Beautiful product. Well made. Went together easily. Sturdy and infinitely adjustable. I like that it installs with no drilling. Looks beautiful on my new Platinum F-150. I am happy that If I want I can remove the towers easily. Well worth the money. Great service from eTrailer. Came well packaged and very quickly.
by:
Ian M. - etrailer.com Employee
12/09/2014
I have had this ladder rack for a while now and have only good things to say about it. Having a short bed truck, this rack offers a great way to haul longer items that would not normally fit well in my bed. The rack works great for hauling long pieces of lumber. When you need your bed space back, it is really easy to slide the rear rack forward. Just loosen the locking knobs on either side of the rack and slide it forward.
by:
Chris
08/07/2017
2016
Ram
2500
Very well made and easy to install. Hardest part is aligning the rails and not showing any of the stake pocket by the cab. Be sure to have a torque wrench, the rubber block makes your hand tightening deceiving.
by:
Thomas
06/08/2020
It was a tight fit with my existing GatorTrax Tonneau Cover but doable. The Bull Ring Pocket Router made cutting of the stake pockets a breeze.
25
175
true
Show More Reviews
See what our Experts say about this Thule Ladder Racks
- Compatible Ladder Rack With TruXedo Deuce 2 Soft Cover On 2016 Ford F-250 Short BedI do have an option for you but The TruXedo Deuce 2 Soft Tonneau Cover - Hinged - Roll Up part # TX769101 on the 2016 Ford F-250 Super Duty is not compatible with the Thule TracRac part # TH43003XT-510 because the cover's rails install too closely to the bed rails so the ladder rack track would not have room for installation. I recommend to use Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43003XT-510 on the 2016 Ford F-250 short bed with BAK Revolver X2 Hard Tonneau Cover -...
view full answer...
- Ladder Rack That Works with BAK Revolver X4 Tonneau CoverFinding a ladder rack that is compatible with a tonneau cover is always tough, but I have a great solution for you! I recommend going with the Thule TracRac SR # TH43003XT-510 (6-1/2ft bed) or # TH43003XT-010 (8ft bed). The Thule TracRac is a sliding ladder rack that mounts onto the bed rails on your 2016 Ford F-350 Super Duty and won't interfere with the functioning of your BAK Revolver X4 # BAK79310 . The TracRac has cross bars that allow you to use a variety of crossbar mounted accessories....
view full answer... - Comparing the BAKFlip MX4 and BAK Revolution X2 Tonneau Covers Being Used With a TracRac RackI contacted the manufacturer of the BAKFlip MX4 Tonneau Cover, # BAK48310, and they told me all though using this cover may work with the TracRac SR, # TH43003XT-510, they cannot confirm that when folding the cover all the way to the cab will or will not interfere with the ladder rack arms. They suggested using the BAK Revolver X2, # BAK39310. The Revolver will allow you access to your truck bed without interfering with the TracRac ladder rack rails. You can also use the BAKBox 2 Collapsible...
view full answer... - TracRac SR Ladder Rack Compatible with Access TonnoSport Soft Roll-Up Tonneau Cover The Access TonnoSport Soft Roll-Up Tonneau Cover # A22010319 that you referenced is a confirmed fit on your 2004 Ford F-250 with the 6-3/4-foot bed. Thank you for your photo showing it installed. Since this cover installs inside the truck's bed rails, rather than on top of them as some other covers do, this means that those rail tops can be available for installation of a ladder rack. When both a tonneau cover and a ladder rack mount in the same place they will be incompatible, but when...
view full answer...
- Is The Yakima OverHaul HD Ladder Rack For Tonneau Covers Compatible With The BAKFlip F1No, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 is designed to work with tonneau covers that have accessory slots for the adapters to slide into so it would not be compatible with the BAKFlip F1 Hard Tonneau Cover # BAK72310. You would need a cover like the Pace Edwards UltraGroove # 311-KRF6985 or RetraxONE XR # RTT-60362. If you already have the BAKFlip F1 # BAK72310 and are needing a compatible rack then you would need either the Thule TracRac...
view full answer... - Recommended Tonneau Cover Compatible With TracRac SR Sliding Ladder RackThe BAK Revolver X2 Hard Tonneau Cover # BAK39311 for 8 foot bed or the # BAK39310 are the only tonneau covers that are a perfect fit to allow full function of both your locking tonneau as well as the use of the TracRac SR Sliding Ladder Rack # TH43003XT-010 or # TH43003XT-510. Although other tonneau covers with interior rails can fit with the rails of the sliding ladder rack, the rack has an inward slant that makes the folding style use limited and requiring movement of the ladder rack...
view full answer... - Tonneau Cover that Will Fully Retract and Not Interfere with 2015 Ford F-350 with Tracrac SRThe Revolver Bak Hard Tonneau Cover # BAK39310 will work with the TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-510 because the F1 installs inside of the bed rails rather than on top of the rails. The SR Sliding Rack installs on top of the bed rails, in the stake pockets. The tonneau will not interfere with the ladder rack. It is possible that the upright arms of the ladder rack may interfere when trying to fold up the tonneau. Using a quad fold tonneau cover like the F1 will increase...
view full answer... - Ladder Rack That Is Compatible With the BAKFlip F1 Hard Tonneau CoverThe TracRac SR Sliding Truck Bed Ladder Rack, # TH43003XT-510, is confirmed to fit the 2014 Chevrolet Silverado 1500 with 6-1/2 ft. bed. However, this rack will not work with the BAKFlip F1 Hard Tonneau Cover, # BAK72121. The edge of the tonneau cover hits the TracRac bed rails that are mounted to the truck. We have contacted TracRac and they have told us that the only tonneau covers that will work with the SR racks are the rolling style covers. The BAK Revolver X2, like # BAK39121,...
view full answer... - Ladder Rack Compatible With Truxedo LoPro QT Tonneau Cover on 2014 Chevy Silverado 1500Because the Truxedo Lo Pro QT sits to the inside edge of the bed sides, it is possible to use a ladder rack that mounts to the top of the bed side rail, via the stake pockets. Just about all the ladder racks we offer would mount to the inside edge of the bed side, which won't work if you want to use a Tonneau cover. The TracRac SR, part # TH43002XT-782EX attaches to the top of the bed side and would be perfectly compatible with your Truxedo LoPro QT Tonneau cover. This ladder rack is...
view full answer... - Ladder Rack and Tonneau Cover that Fit Together on 2001 Ford F-350 Short BedThe Bak Revolver tonneau part # BAK79303 with the TracRac sliding ladder rack part # TH43003XT-510 is the correct fit for your 2001 Ford F-350 short bed. This is the best solution when needing both a ladder rack and a tonneau but even individually these are both excellent options. The Bak is the only tonneau that rolls up far enough to the inside of the bed rails that will allow the base rails of the TracRac to fit.
view full answer... - Correct Thule TracRac SR Ladder Rack for a 2006 Dodge Ram 1500 with 6-1/2' BedThe Thule TracRac SR # TH43003XT-510 that you referenced is a fit for various Ford Super Duty pickups but you can get the Thule TracRac SR part # TH43003XT-501 instead which will fit your 2006 Dodge Ram 1500 with the 6-1/2' bed.
view full answer... - TracRac Ladder Rack and RetraxPRO MX Fitment for a 2011 Ford F-350 Super Duty Short BedAs long as your older TracRac is the SR version that installs using the stake pockets, like the current Thule TracRac SR # TH43003XT-510, it will fit and work with the RetraxPRO MX Hard Tonneau Cover # RT80362 on your 2011 Ford F-350 Super Duty with the 6-3/4' bed. If your TracRac ladder rack uses the clamps on the inside of the bed rails then there aren't any tonneau covers that will fit. You can swap out your ladder rack for the SR mentioned above if you'd like though. There are also...
view full answer... - Recommended Tonneau Cover And Ladder Rack For 2016 Ford F-250 Super Duty With 6-3/4' BedI have another option for you, but while the Invis-A-Rack Folding Ladder Rack # DZ951600 you were looking at is confirmed to fit your 2016 Ford F-250 Super Duty with a 6-3/4' bed, there is not a tonneau cover made for your truck confirmed to work with this rack. Instead I recommend using the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-510 which has a maximum load capacity of 1250lbs, and since the ladder rack slides in a track system, it can be moved to support any load...
view full answer... - Best Tonneau Cover That Works With The Thule TracRac Ladder Rack On My 2011 Ford F-350According to BAK, the tonneau cover that works the best with the Thule TracRac # TH43003XT-510 is either the BAK Revolver X4 or X2. There is two versions for both the X2 and X4. The 6-3/4 foot bed option for the X2 # BAK39310 and the X4 # BAK79310 and also the 8 foot bed option for the X2 # BAK39311 and the X4 # BAK77ZR. I've included videos for both the X2 and X4 to help you decide! The only difference is the finish of the covers. The X4 has more of a matte finish and the X2 has more...
view full answer... - Thule Ladder Rack Compatible with the BAKFlip MX4 on a 2013 F-350 Short BedIt looks like you have the BAKFlip MX4 for the 2013 Ford F-350 short bed, part # BAK48310. This tonneau cover does install inside the bed rails, so using the Thule TracRac SR Sliding Truck Bed Ladder Rack that is compatible with your truck, part # TH43003XT-510, is a great option since it installs over the bed. I've linked to a video review of this ladder rack for you to look at. As for the panels of the tonneau cover hitting the legs while folding, that may still be somewhat of an issue....
view full answer... - TracRac Ladder Rack Recommendation for 2015 Ford F-250 Super Duty 6-3/4 Foot BedThe correct TracRac sliding ladder rack for your 2015 Ford F-250 with a Crew Cab and 6-3/4 foot bed is the part # TH43003XT-510 which is a confirmed fit.
view full answer... - Thule Kayak Carriers that Can Fit Top Channel of TracRac Sliding Ladder RacksSince the load bars of the Thule TracRac Ladder racks are much thicker than roof rack crossbars the types of kayak carriers that can fit them are the ones that can install in top channels. The Thule kayak carriers that will fit into crossbar channels are: Hullavator Pro # TH898 DockGrip # TH895 DockGlide # TH896
view full answer... - Ladder Rack Recommendation for 2016 Ford F-250 Short Bed with Tonneau CoverSince you have a tonneau cover on your 2016 Ford F-250 the best we can do is a sliding ladder rack since none of the folding ones will fit. Reason being the folding ones all clamp around the inside of the bed rail where your tonneau resides. Only option we have is the TracRac Sliding Rack part # TH43003XT-510.
view full answer... - Tonneau Cover to Fit 2016 Ford F-350, 6-3/4 Ft Bed, with TracRac SR Ladder RackI have a solution for you, but we have found that the BAKFlip F1 # BAJ72310 tonneau cover is not compatible with the TracRack SR Ladder Rack # TH43003XT-510. This is due to the fact that the rubber seal along the outside of the tonneau cover contacts the base of the ladder rack with folding the tonneau cover. Many times the base of the ladder rack will not allow the rubber seal to lay flat along the top of the truck bed rail. Instead of the BAKFlip F1, I recommend the BAK Revolver X2...
view full answer... - Ladder Rack Recommendation for 2014 Ford F-350 with Tonneau CoverSince you have a tonneau cover installed on your 2014 Ford F-250 you will have to go with a ladder rack that installs through the stake pockets and does not wrap around the bed rails at all. For that we have two options depending on your bed length. If you have a short bed truck you would need the part # TH43003XT-510. If you have a long bed you are going to need the part # TH43003XT-010.
view full answer... - Which TracRac SR Ladder Rack Fits a 2008 Ford F-250 Super Duty 6-3/4 BedThe correct TracRac SR ladder rack for your 2008 Ford F-250 Super Duty 6-3/4' bed is part # TH43003XT-510. If you want the over-the-cab extension then you need part # TH43003XT-510EX instead. Either option will sit 28-15/16" high (including the base rails) and will work great with the Toolbox Mounting Kit # TH25200 that you already have. I have attached some review videos for you to check out.
view full answer... - TracRac SR Ladder Rack Compatibility With BAK Revolver X2 Tonneau Cover On 2015 Ford F-350 Short BedThe TracRac SR Ladder Rack will allow some tonneau covers that fit between the bed rails to fully open. The the BAKFlip F1 Hard Tonneau Cover - Folding - Aluminum and Fiberglass # BAK72310 may work, but may rub the edges of the track or tonneau. The only hard tonneau cover we have a confirmed fit with the TracRac SR # TH43003XT-510 is the BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl # BAK39310. This is a confirmed fit for your 2015 Ford F-350.
view full answer... - Recommended Ladder Rack for 2003 Ford F-250 with Tool Box As long as the weather guard box doesn't hang over the top of the bed's side rails on your 2003 Ford F-250, the best option for a compatible ladder rack is one that mounts right on top of the rails without requiring any space on the inside. For this I highly recommend the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-510. This would let you keep the toolbox in place when utilizing the rack. This is an excellent system that uses unique T-track base rails that attach to the...
view full answer... - Sliding Truck Bed Ladder Rack for 2004 Ford F-250 Super DutyThat's a good question but the only difference between these part numbers is that they fit different trucks, and we absolutely have a TracRac SR ladder rack that will fit your 2004 Ford F-250 Super Duty, it just depends on the bed size you have. For a 6-1/2 foot bed you need the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-510. If your '04 F-250 has an 8 foot bed you need the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-010. This ladder rack is going to allow...
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Michael B
Written by:
Matthew S
Video by:
Ryan G
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
10/20/2025
That looks great on your truck! I am glad it has been working well for you. Where are you mainly taking that canoe out to?