Should Spring Bars Be Removed when Backing Up with a Weight Distribution System
Updated 04/22/2013 | Published 04/19/2013
Question:
Is there any issues with backing-up and making sharp cuts with weight distribution sway control RP66084 installed
asked by: Don D
0
Expert Reply:
With any weight distribution system you will want to remove the spring bars every time you encounter any tight maneuvering situation. So if you were reversing your trailer and the trailer did not swing too far to one side or the other you should be fine, but I still would recommend you disconnect the bars under most normal reversing circumstances just to be safe.
expert reply by:
Jameson C
0
