How To Determine Correct Replacement Front Leg for Lippert Ground Control 3.0 Leveling System

Question

Question:

I have a 2016 Coachman Brookstone 395RL Is Item # LC362485 for the 3.0 system the correct replacement part? It looks the same. Where can I find the part number on my existing jack leg?

asked by: Scott

0

Expert Reply:

In order to determine what system you have, you'd need to be looking at the touch pad or control module. The touch pad for the 3.0 looks like part # LC421484. There is also a part number on the control module that can be referenced but there are really not many automatic leveling systems on the market so you more than likely have the Lippert Ground Control 3.0. Therefore, the correct replacement leg for the front would be part # LC362485.

expert reply by: Conner L

0

Answer 1

The distance between the insides of the weld stops on the jack leg #LC362485 is 17-1/2 inches and the outer tube diameter is 2-1/2 inch by 2-1/2 inch.

view full answer...

Answer 2

Hey Patrick, thanks for reaching out. Yes, the Replacement Front Jack Leg #LC362485 should work for your 2021 Open Range 314RLS with the Lippert Ground Control 3.0 system. Since your weld stop “bump outs” measure 17-1/2" apart, that matches the…

view full answer...

Answer 3

Hey Feb, no there isn't a rebuild kit for the Replacement Jack part #LC362485. If yours is damaged only solution would be a replacement

view full answer...

Answer 4

Both would actually work as a replacement front jack for your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System - 6-Point Set #LC675817. It just depends on if you want the jack tube only, or the jack tube, motor, and foot. -…

view full answer...

Answer 5

For the Lippert Ground Control 3.0 system #LC358590 or #LC675817 the correct front jack replacements is the part #LC362485. This works on the front and left jacks so you'd need a quantity of two. The price is available down below at the link.…

view full answer...

Answer 6

Hello Jerry, thanks for reaching out. I am sorry to say we do not offer a replacement rod and nut for the Lippert Ground Control 3.0 jacks. The only solution I can offer would be a whole new leg such as part #LC362485 which replaced the front jack…

view full answer...

Answer 7

Hello Michael, Congrats on the new 5th Wheel! What’s your favorite feature so far? Three words everyone likes to hear: "You are correct." And you are! Your pin box is indeed the Lippert Rhino. I’m not sure why Lippert doesn’t just put that…

view full answer...

Answer 8

Can you let me know what landing gear set you have on your RV? I don't have a way to look that up so I would need you to get me that info.

view full answer...

Answer 9

We sure do Billy! That 241846 part number you gave me corresponds to the Replacement Heavy Duty Driver Leg for Lippert Ground Control 2.0 Landing Gear item #LC241846. The item #LC241846 is intended to replace the heavy duty master leg on Lippert…

view full answer...

Answer 10

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Answer 11

We have exactly what you are looking for - heavy duty landing gear with a long extension, dual motors, and no cross member - with one set from Ultra-Fab: - Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010 This landing gear has a total capacity…

view full answer...

Answer 12

There is an easy way to tell in this situation. The Lippert Components 32" Lead 5th Wheel RV Landing Gear part #LC179013 has a weld stop measurement outside to outside of 17.5". You can simply measure yours and if it is the same these will…

view full answer...

How To Determine Correct Replacement Front Leg for Lippert Ground Control 3.0 Leveling System

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching