bing tracking image
  1. RV Vents and Fans
  2. MAXXAIR
  3. Vent
  4. Roof Vent
  5. 12V Fan
  6. White
MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White
MAXXAIR

MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White

In Stock
$188.52
RV Vents and Fans
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out. Great Prices for the best rv vents and fans from MAXXAIR. MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White part number MA00A04301K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (281)
  • Q & A (0)
  • Photos

MAXXAIR RV Vents and Fans

Highlights

  • Circulates fresh air fast: 12V fan moves 900 CFM with 4 adjustable speed settings.
  • Keeps bugs and debris out: Removable screen makes cleaning quick and simple.
  • Seals tight in bad weather: Rubber weather seal helps prevent leaks when closed.
  • Stays steady in wind: Twin lift arms keep the dome stable while open.
  • Simple roof install: Fits standard 14"x14" openings on 2" – 6-1/2" thick roofs.
  • Easy power hookup: Uses 2-wire design—black for power, white for ground.

Features to know about

Keeps Air Moving with 12V Fan: 4-Speed Control for the Right Airflow

The built-in 12V DC fan moves up to 900 CFM, keeping the air inside fresh and comfortable. With four speeds to choose from, it’s easy to dial in just the right amount of airflow. Close the vent and it switches into ceiling-fan mode to circulate air without pulling outside air in. The sealed, fuse-protected ball bearing motor runs quietly and stays protected from dust and moisture.

Close-up view of the MaxxFan roof vent’s 12-volt motor assembly showing the fan blades and internal housing for airflow in RV ventilation systems

Simple Manual Lift: Hand-Turn Knob with Dual Arms That Stay Put

The manual knob lets you open or close the dome exactly where you want it, then lock it in place. The twin lift-arm design supports the dome evenly, so it won’t flutter in the wind. The high-density polypropylene lid has a smooth, low-profile look when closed, blending cleanly with the roofline.

White MaxxFan roof vent dome with twin lift arms shown in open position on RV roof

Close-up of manual knob control on MaxxFan roof vent for opening and closing the dome in RV ventilation system

Flush-Mounted Keypad: Easy Fan Operation Right on the Vent

A built-in keypad sits flush under the vent, giving you quick control of power and fan speed. There’s no need for separate switches or remotes—everything is right there where you use it.

Flush-mounted keypad of the MaxxFan roof vent showing control buttons for fan speed and power in an RV ceiling vent

Straightforward Install: Fits Standard 14" x 14" Openings

This vent fits roofs 2" – 6-1/2" thick and drops right into a standard 14" x 14" opening. The molded-in flange with rubber weather seal helps prevent leaks, and the included garnish, insulated electrical connectors, and hardware finish the job. It uses a simple two-wire connection—black for power and white for ground—and draws 5 amps.

MaxxFan roof vent with attached MaxxAir FanMate cover installed on RV roof for rain protection

Keeps Bugs Out, Cleans Up Fast: Removable Screen with Clip Mounts

A built-in bug screen keeps insects and debris out while still letting air flow freely. It’s held in with four retainer clips that twist for quick removal, making it easy to pop out for cleaning or maintenance.

Removable bug screen with mesh and retainer clips for MaxxFan roof vent used in RVs to block insects

Specs

Fit and Compatibility

  • Fits: roofs 2" - 6-1/2" thick
  • Opening size: 14" wide x 14" long

Dimensions

  • Overall dimensions (outside of flange to outside of flange): 18-1/8" long x 16-1/2" wide
  • Garnish dimensions: 16-1/4" long x 16-1/2" wide
  • Vent extends above roof: When closed: 4-1/4" | When open: 12-1/4"

Fan Specifications

  • Overall fan diameter: 12"
  • Fan capacity: 900 CFM
  • Quantity of fan blades: 10
  • Power draw: 5 amps

Warranty

  • Warranty: 2-Year limited on vent assembly
  • Warranty: Limited lifetime on dome

Note

Not for use above tubs, showers, or range cooking surfaces.

00B04301K Max Air Max Fan RV and Trailer Roof Vent - White Dome

Replaces MaxxAir 00A04301K

Item # MA00A04301K

Installation Details MA00A04301K Installation instructions



Customer Satisfaction Score:

Ratings & Reviews

4.7

281 reviews
Review sort icon
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.

by:

High quality and no problem with installation. Replaced the OEM fan/vent in our 2017 Jayco JayFlight SLX 265RLSW. Certainly pulls more air through the camper than the stock unit with the tiny fan. Also installed the Maxxair FanMate cover and that was ultra simple, snap on the grill, place over the new vent and install the four clips. Installation instructions from Maxxair are clearly written and easy to follow. I like the ability to tow the camper with the vent open and the fan on so the camper is not hot as an oven when we arrive at the camp site. Etrailer.com shipping is quick and the fan and cover arrived in excellent condition as with everything I have ordered from them. The product description videos on their website are an added bonus.



by:

fan works fine.



by:

My first review of this fan was less than glowing. We installed it in a class b motorhome , installing was a breeze , connected it to 12 volt circuit started up ran a few minutes then it turned off. Checked everything , turned back on same thing. Called tech support they said bad control board , sent me a new one , installed it. Same thing called them back , eric asked do you have LED lighting on that circuit? Rv owner had converted the lights to led lighting. Ran a seperate circuit for the fan & all is well , fan works great now!!! Took solving a mystery and lots of head scratching but we got it going and are happy with the fan and etrailer.



by:

Easy to install and easy to operate.

Jeremiah profile picture

Jeremiah

7/2/2025

I love it! East to install. Easy to operate.



by:

Great product and I would recommend to anyone. The hardest part of the entire installation was removing sealant from the old vent and roof. A heat gun helped greatly with this. Don't forget to buy the needed sealants to install the new one.

Heather A. profile picture
Etrailer Expert

Heather A.

6/6/2018

I recommend a sealant such as part # 0160297.



by:

The fans were a great value work exceptionally well are very quiet. The one thing I did was by a switch and wire it in so I can reverse the fans from intake to outtake. Switches were less than $10 and if I remember right it was a considerable amount more if you bought a reversible fan system so I would highly suggest people to go on [online] and looking at it it’s not that hard to do. Thanks again for all your help look forward to my next purchase from you.

Thomas profile picture

Thomas

12/23/2022

I’m very satisfied with this product. I did modify it and wired in a reversal switch.



by:

Very happy with the fan. I replaced an OEM fan on my older Itasca because of the noise and also the seal had deteriorated over the years. This has several advantages; removable screen, extremely quiet fan, 4 speed motor. I was unable to find a replacement seal for the MaxxFan. Unsure whether a universal seal will work so that could be an issue. Once installed it would be good to know that parts that may fail over time are actually replaceable like the fan blades, the fan motor, the switch and the seal. Can't really tell if any of this is possible.



by:

MaxxFan is the high quality standard for RV fans, and this model cam with easy to follow instructions, written in English, by a person who obviously knows the product well. I was able to complete this job in just under 4 hours - the most difficult part was clearing t e2 inch margin around the fan from the previous installations (I used a paint removal heater gun). Quick, on time shipping, and good recommendation from etrailer!



by:

Not really happy with this product. Expensive fan that will not run for three minutes without turning itself off. Called the mfg , they said bad board they sent a replacement board , worked great for a week now it is back to turning itself off again!!! Not etrailers fault , just a sorry & expensive piece of junk. Wish i had bought the fantastic fan instead. How hard is it to build a 12 volt fan????

Arthur P. profile picture

Arthur P.

8/18/2019

Still going strong!!!! Good product.



by:

Site could use one or two filters to help customers decide which unit to purchase. There is a large number to browse through. Purchase was easy. Unit properly described, shipping boxes were well packed. Unit installed easily, due to etrailer's how to install video. Happy with purchase and easy of installation. Will buy from etrailer again. Thank you.

FJ profile picture

FJ

10/15/2020

Product is excellent! Multiple speeds adds to overall quality of product design.



by:

Great fan, easy installation.



by:

This fan has performed flawlessly for MANY camping tips over the last year. We have a mini camper and I like parking it in the garage. To facilitate this I mounted the fan on the exterior side wall at the trailer nose so it fits under the door. Installation was straightforward and has made our little sleep space very comfortable. One fine value in our opinion. Wholeheartedly recommended.

Jim M. profile picture

Jim M.

10/23/2018

Working very well. Thanks!



by:

works great, i have several and they keep the generators from overheating

John profile picture

John

3/10/2025

the fan motors have stopped working. they overheat and stop working, wont start back up till they cool down.



by:

Fit perfect. Easy to install. Does a good job



by:

Really easy to install!

Lazer S. profile picture
Etrailer Expert

Lazer S.

9/30/2025

Glad to hear it, Mike! If you tell me that thing leaks from the seams, I may have to call you a liar. That's not going anywhere (slaps it in successfulness). : P What did you install this on?



by:

Everything I received is exactly what I needed. The Customer Service was excellent and I look forward to using etrailer for any future needs I may have.



by:

Seams like nice product fit the 141/2 x141/2 opening just fine looks nice but only turned it on twice now to date . Installation was easy



by:

Just as advertised.



by:

Very easy installation. I'm an average do-it-yourselfer and had no problems. I replaced one of the original vents in a 20 year old Airstream. The hardest part of the installation was removing the old vent, Airstream didn't skimp on the adhesive. The Maxxfan looks good inside and out and the fan is very quiet. I was very impressed with the quality and workmanship of the whole unit. I've already ordered another one to replace the other original vent.



by:

Perfect replacement for our bathroom fan replacement.



by:

Great service with quick shipping too. Best price I found online also. Will definitely buy from this company again.



by:

Like too say you guys have been great keeping me updated on shipping n so forth I really appreciate all your team does for the customer's i will be letting friends and family know about your company thanks again

Mike L. profile picture
Etrailer Expert

Mike L.

1/28/2026

Thanks for the kind words (as well as the referral!) We really appreciate it!!



by:

Easy install. The hardest part was getting the old vent out and cleaning up the mounting surface. Stuffing the long electric wires into the side was a little fiddley. Cutting the inside trim ring was ok as I used a plastic cutting blade on a jig saw.



by:

I bought 2 about a year ago and boy am I glad I did. They are awesome!!!

Terry profile picture

Terry

8/28/2026

They are still working like day one.

Heather A. profile picture
Etrailer Expert

Heather A.

8/28/2026

@Terry Heck yeah Terry, that's great news. What kind of trailer are you using them in?


by:

Huge improvement over the previous bathroom vent fan. This thing moves a lot of air and is very quiet. Removal of the old fan was a lot of work but the install was very simple. Excellent product and shipping was very fast.


25
25

See what our Experts say about this MAXXAIR RV Vents and Fans

  • How To Use a Roof Vent Cover With An Auto Open Roof Vent
    The tallest roof vent cover we offer in white is going to be the MaxxAir FanMate RV and Trailer Roof Vent Cover part # MA00-955001 which is about 10-1/4" at its highest point. I will say that most of the auto-open roof vents will stop raising when they sense resistance so you may still be able to use the above or the Camco Aero-Flo RV Roof Vent Cover w/ Swing Open Lid part # CAM40421 that you referenced. However, if your roof vent does not stop opening when sensing resistance then your...
    view full answer...
  • Is Butyl Tape Needed When Installing MaxFan Roof Vent
    When installing the MaxxFan Roof Vent # MA00A04301K that you referenced you will want to use butyl tape on the vent edges in addition to the sealant that you will apply around the unit to cover up bolt holes and any other areas that might lead to a leak. I have attached a sample vent installation on a different model vent just so you can get a better idea of the process. We do have the Roof Vent Installation Kit # 344270KITW available that includes a 10.1 oz bottle of sealant, a 60 foot...
    view full answer...
  • Low Profile Roof Vent Recommendation for Camper
    The lowest profile roof vent we have that has a fan built into it was the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K which when closed sticks up 4-1/4 inches from the roof it's installed on. (edit: now the lowest profile is the part # MA00-04301M which sticks up 2-7/8 inches). You'd have to measure to be sure that would fit under your roof rack or not.
    view full answer...
    Image 1 for
  • Replacement White Lid for MaxxFan and MaxxFan Plus Roof Vent MA00-04000K and MA00A04301K
    Unfortunately, Cindy there's no way to adjust the tension, hinges, or mounting brackets on the Replacement Lid item # MA10A40002K. I'm wondering if your fans lifting arm is bent or twisted. You could replace it with item # MA10-20222KS. This also works with the Maxx Fan item # MA00-04000K and item # MA00A04301K Where do your lids keep cracking? You can add this information, along with any other questions you have, where it says Add Comment.
    view full answer...
  • What Is The Difference Between MaxxAir MaxxFan Standard Roof Vent and Mini Roof Vent
    The difference between the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K and the MaxxAir MaxxFan Mini Roof Vent # MA00-04301M is the height of the fan and the roof thickness they will fit. The mini roof vent extends 2-7/8" above roof when closed while the standard Maxxfan Roof Vent extends 4-1/4" above the roof when closed. The mini roof vent also fits roofs 1" - 6-1/2" thick while the standard fits roofs 2" - 6-1/2" thick. Both models have a 4 speed option, manual lift and fit 14W X 14L...
    view full answer...
  • RV Roof Vent Recommendations, One with Rain Sensor and One that is Manual Lift
    Hey Charlie, the MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-04500K is what I recommend for a roof vent that is quiet and has a rain sensor like you are looking for. Then for a manual lift roof vent the MaxxFan Roof Vent part # MA00A04301K would be a great option. Then for covers for both you could use the part # MA00-955001 which was designed to be used with MaxxFans like what you have. For a vent install kit that doesn't have the leveling caulk then we have the...
    view full answer...
  • Why Does my MaxxFan Roof Vent 4301K Have a Red Glow When the Cover is White?
    Hey Wilma, thanks for reaching out! I honestly don't know why your MaxxFan Roof Vent w/ 12V Fan # MA00A04301K is giving off a red glow, but it likely has to do with what's on the top part of the cover. Are you seeing this throughout the day, or just in the mornings and evenings?
    view full answer...
  • What Powered Kitchen Fan Assembly do You Have to Replace My Fantastic Fan in My 2002 Newmar?
    Hello Daryl, All of the fans that we carry are designed to fit into the standard 14" by 14" opening. The most cost effective option we have for a powered fan is the one you were already looking at, the MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White # MA00A04301K. Any fun adventures this year?? Where have you been, or where are you headed?
    view full answer...
  • Roof Vent Recommendation For A 1978 VW Adventurewagen
    Instead of going with the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K mentioned before, I suggest taking a look at the: -Fan-Tastic Vent Roof Vent w/ 12V Fan and Thermostat # FV803350 instead. This roof vent is designed to fit RV, camper, and trailer roofs up to 4" thick, unlike the MaxxFan Deluxe you mentioned which will fit roofs 2"- 4-1/2". Additionally, this fan is also reversible, and the variable speed fan offers two modes of operation that allow you to boost or reduce airflow...
    view full answer...
    Image 1 for Image 2 for
  • Can MaxxFan Roof Vent w/ 12V Fan MA00A04301K Install On 1 inch Thick Roof
    Hey John, you can install the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K on a 1 inch thick roof like what you have but you will need to cut the ceiling garnish down shorter to match that.
    view full answer...
  • Replacement Vent Lid for 2000 Skamper 23C
    Hi Jeff, I'm sorry to say none of our replacement lids match that hinge style. I would try reaching out to a local shop to see if they have a replacement available. The only other option would be to replace it a new vent like the # MA00A04301K or # MA00-04401M. If you need anything else feel free to reply below.
    view full answer...
  • Recommended Vent Cover for a MaxxFan Roof Vent 4301K
    Hey Flavio, for your MaxxFan Roof Vent w/ 12V Fan # MA00A04301K you can use the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001.
    view full answer...
  • Do You Carry The MaxxAir 4501K Roof Vent With Black FanMate Vent Cover?
    While we do have the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002 we do not carry the exact roof vent you are wanting. We do have the MaxxFan Roof Vent # MA00A04301K which has the same features with the only difference being a white lid versus the black on the 00A4501K. Since you will have the FanMate black covers you would only be able to see the difference in lid color looking up inside the camper.
    view full answer...
  • MaxxAir Translucent Replacement Lid for More Natural RV Bathroom Light
    Hi Mike, there is a better option for bringing more daylight back into the bathroom but we do not have a true clear lid available. MaxxAir Lid part # MA00-335001 is the actual replacement vent lid uses a translucent white design instead of the fully opaque style. That means you’ll still get privacy and some UV protection, but it lets in noticeably more natural light when the vent is closed so you’re not reaching for the light switch in the middle of the day. I completely understand the...
    view full answer...
  • Availability of Replacement Circuit Board for MaxxFan 4751-2019-12-10
    Hey Scott! What you have is a MaxxFan 4751. I'm sorry to say that MaxxAir discontinued the replacement circuit board back in December of 2024. The only option is to completely replace the vent with one like the MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White # MA00A04301K. If you need anything else don't hesitate to reach out in the comments below.
    view full answer...
  • Sealant for Roof Vent Installation on 2015 Mercedes-Benz Sprinter
    Hey Soyka! The best sealant to use when installing the # MA00A04301K or any other roof vent on your Sprinter is the LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1. We use this for installations as well. You will also want butyl tape so I recommend grabbing our Roof Vent Installation Kit # 344270KITW.
    view full answer...
  • Options For Replacing A Lid Cover On A Ventline Northern Breeze BVB0568-01
    Thank you for the pictures. I do have a potential solution for you, but the Ventline northern breeze has been discontinued. We actually used to sell them here. The last one we sold was in 2018. I know this is not what you were hoping to hear, but replacement pats may be near impossible to find. At this point I recommend replacing the entire vent assembly. If you are in need of a new vent, a good replacement is the MaxxFan roof vent # MA00A04301K. This will be pretty similar to what you...
    view full answer...
  • Replacement Screw for a Manual Maxxair Locking Knob
    From everything I could find, the screw should be the Replacement Locking Knob Screw for MaxxAir MaxxFan and MaxxFan Deluxe # MA10-21241K. However, this is specifically designed to fit the MaxxAir MaxxFan # MA00-04000K or # MA00A04301K or the MaxxFan Deluxe # MA00-06401K. This is due to the knob on these models being on the thick side and the screw needing to go fairly far up into the unit to get purchase. I included an image showing what I mean as well. With that being said, if you do...
    view full answer...
    Image 1 for
  • MaxxAir Roof Vents for RVs with Thermostats with Manual Lift and Powered Lift
    You are correct and all of the settings of the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07000K that you mentioned are correct. The powered lift can be turned off to allow you to manually lift the lid, this is thermostatically controlled, and due to the lid design it could be open and vent while raining. This is due to the vents being underneath the lid. I attached a picture that shows what the display looks like for the temperature setting. The smoked color actually...
    view full answer...
    Image 1 for
  • Replacement Circuit Board For A MaxxFan Plus Roof Vent 4500K
    For your MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-04500K, you're going to need to use the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan # MA10A21275K that you mentioned. The Replacement Printed Circuit Board and Switch for MaxxFan Roof Vents # MA10-04301k-v16 is actually designed to work with the MaxxFan Roof Vent w/ 12V Fan # MaxxFan Roof Vent w/ 12V Fan # MA00A04301K, as well as the other models 4201KW, 4251KW, or 4401KW.
    view full answer...
  • MaxxFan Roof Vent With A Brushless Motor
    The MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White Item # MA00-07000K has a brush motor. The MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White # MA00A04301K however does have a brushless motor. This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects...
    view full answer...
  • Vent Cover For MaxxFan Roof Vent 4301K
    This cover will fit. The MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001 is designed to fit all of the 4000 Series MaxxAir Fans with 4 mounting tabs, including your MaxxFan Roof Vent w/ 12V Fan 4301K # MA00A04301K
    view full answer...
  • Intake & Exhaust Capable MaxxAir MaxxFan Roof Vent Option
    Sure thing! The MaxxFan Roof Vent w/ 12V Fan # MA00A04301K is actually exhaust only. However, if you're wanting the exhaust & intake version, then you'll want the: -MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat # MA00-04000K.
    view full answer...
  • Maxxfan Item # MA00A04301K Shutting Self Off After 1 Minute On High Speed
    According to the manufacturer, if the controls are not working correctly the circuit board Item # MA10-04301k-v16 is malfunctioning on your MaxxFan Roof Vent Item # MA00A04301K. Since you have replaced the circuit board already and it is doing the same thing, the replacement board could be bad. If you wanted to try to replace the motor it would be Item # MA10-20968.
    view full answer...


< Previous




Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Kathleen M
Updated by:
Kathleen M
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Jenny M
Updated by:
Jenny M
Employee Michael B
Updated by:
Michael B
Employee Matthew E
Updated by:
Matthew E
Employee Tim N
Updated by:
Tim N
Employee Manda E
Updated by:
Manda E
Employee Cole B
Installed by:
Cole B
Employee Robert C
Installed by:
Robert C
Employee Jacob W
Written by:
Jacob W
Employee Aidan B
Video by:
Aidan B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 1-800-940-8924