Heavy Duty Landing Gear With Dual Motors for 5th Wheel Trailer

Updated 10/09/2020 | Published 10/08/2020

Question:

Hello, I have a 2015 Eclipse Attitude 28SAG with what I assume are the stock landing gear jacks. They are slow and sound like they are grinding rocks.. Im definitely looking for something a little sturdier. Also, I have a 6inch lift on my trailer subframe so I really need something on the longer side. Currently, I just use blocks, and I can continue to do that.. but if I can get away with fewer blocks that would be ideal. I think its a single motor system now with a cross member.. is there an option to move to a dual motor without the cross member in my rig relatively easily?

asked by: Jason C

Expert Reply:

We have exactly what you are looking for - heavy duty landing gear with a long extension, dual motors, and no cross member - with one set from Ultra-Fab:

- Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010

This landing gear has a total capacity of 12,000 lbs, has 38 inches of lift, a 12 volt motor on each leg which can be used independently with their own switch, and uses hangers that are welded onto your trailer frame. The jacks then bolt onto the hangers and you're set.

I have added links below to a video review and the installation instructions for you to check out of the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010.

expert reply by: Kyle S