Lippert Ground Control 3.0 Replacement Front Jacks

Question

Question:

In the previous email you gave me a part number for a Lippert Ground Control 3.0 front replacement jack tube. I am now looking for the part number for replacement rear jack tubes.

asked by: Evan S

0

Expert Reply:

For the Lippert Ground Control 3.0 system # LC358590 or # LC675817 the correct front jack replacements is the part # LC362485. This works on the front and left jacks so you'd need a quantity of two. The price is available down below at the link. This works on the 4 jack and 6 jack Ground Control configurations.

expert reply by: Jameson C

0

Evan J.

5/19/2022

In the previous email you gave me a part number for a Lippert Ground Control 3.0 front replacement jack tube. I am now looking for the part number for replacement rear jack tubes.

Jameson C.

5/19/2022

The replacement rear legs are part # LC342610 for the left rear and # LC428493 for the right rear.

Answer 1

Hey Patrick, thanks for reaching out. Yes, the Replacement Front Jack Leg #LC362485 should work for your 2021 Open Range 314RLS with the Lippert Ground Control 3.0 system. Since your weld stop “bump outs” measure 17-1/2" apart, that matches the…

view full answer...

Answer 2

The distance between the insides of the weld stops on the jack leg #LC362485 is 17-1/2 inches and the outer tube diameter is 2-1/2 inch by 2-1/2 inch.

view full answer...

Answer 3

Hey Feb, no there isn't a rebuild kit for the Replacement Jack part #LC362485. If yours is damaged only solution would be a replacement

view full answer...

Answer 4

Hello Jerry, thanks for reaching out. I am sorry to say we do not offer a replacement rod and nut for the Lippert Ground Control 3.0 jacks. The only solution I can offer would be a whole new leg such as part #LC362485 which replaced the front jack…

view full answer...

Answer 5

In order to determine what system you have, you'd need to be looking at the touch pad or control module. The touch pad for the 3.0 looks like part #LC421484. There is also a part number on the control module that can be referenced but there are…

view full answer...

Answer 6

We have exactly what you are looking for - heavy duty landing gear with a long extension, dual motors, and no cross member - with one set from Ultra-Fab: - Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010 This landing gear has a total capacity…

view full answer...

Answer 7

There is an easy way to tell in this situation. The Lippert Components 32" Lead 5th Wheel RV Landing Gear part #LC179013 has a weld stop measurement outside to outside of 17.5". You can simply measure yours and if it is the same these will…

view full answer...

Answer 8

No, the hall effect motor does not have to be greased, but per the service manual if the jacks are down for an extended period, it is recommended to spray the exposed leveling jack tubes with lubricant every 3 months for protection. If you live in a…

view full answer...

Answer 9

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…

view full answer...

Answer 10

According to our resident tire expert, the 215/60-8 is the modern equivalent of the 18.5 x 8.5-8 tire. I have included a link to a tire sizing FAQ for you that compares different tire sizes. If you just need the tire, we have some options. First is…

view full answer...

Answer 11

The overall height of the Replacement 5th Wheel RV Landing Gear Follow Leg #LC179014 is 32". Since landing gears should always be installed in sets (unless you are using an exact replacement) it isn't surprising that the follow leg…

view full answer...

Answer 12

The Replacement Front Jack for Lippert Components Ground Control 3.0 #LC362485 does not have an individual weight capacity but when used with the 4 point system part #LC358590 the overall system has a 20k capacity. When used with the 6 point system…

view full answer...

Lippert Ground Control 3.0 Replacement Front Jacks

Products Featured in This Question

Continue Researching