How To Determine Which Bearing Kit Fits 2004 EZ Loader Trailer
Updated 06/18/2021 | Published 06/17/2021
Products Featured in This Question
Question:
Wondering if you could tell me what wheel bearing kit for 2004 EZ Loader. Thank you.
asked by: Jordan
Expert Reply:
I would be happy to help you find the correct bearing kit for your 2004 EZ Loader trailer, but unfortunately we do not have a break down of the specific bearings your trailer uses.
Instead you will need to remove one of your hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
If your bearing are worn to the point that you cannot read the bearing numbers then you will need to use digital calipers # PTW80157 to precisely measure your spindles in the locations shown in the included diagram.
If you can provide the above information I would be happy to help you find the correct bearing kit for your trailer.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: bearing kits trailer bearings races seals caps
- Q&A: How To Find Correct Bearing Kit for EZ Loader Boat Trailer
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Search Results: boat trailer wheel bearings
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: trailer wiring
- Search Results: trailer hitch
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Shop: 4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/8" Long
- Shop: Hydraulic Trailer Brake - Uni-Servo - Free Backing - Dacromet - 10" - Left Hand - 3,500 lbs
- Video: Draw-Tite Max-Frame Trailer Hitch Installation How-to Guide - 2024 Toyota Grand Highlander
- Video: Curt T-Connector Vehicle Wiring Harness Installation Guide - 2024 Toyota Grand Highlander
- Video: An In-Depth Look at the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package-C55245
- Video: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-C56RV: The Breakdown
- Video: A Closer Look at the Peterson Clearance and Side Marker Light
- Video: A Closer Look at the Clearance or Side Marker Trailer Light w/ Reflex Reflector
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
on Trailer Bearings Races Seals Caps
