How To Choose Between Dexter E-Z Flex Suspension Kits K71-652-00 and K71-653-00

Question

Question:

I have 2020 Crossroads camper with axles that are marked 5100# with 6 lugs and axle spacing is 34. Should i still use K71-652 kit?

asked by: Rick C

1

Helpful Expert Reply:

In order to choose between the Dexter E-Z Flex Suspension Kits, part # K71-652-00 and part # K71-653-00 you simply need to measure the existing equalizers. If they measure 5-1/2" or close then you'll use part # K71-652-00 but if they measure 7-3/4" or close then you'll use part # K71-653-00.

expert reply by: Conner L

1

Answer 1

Normally you would need to measure your equalizer so we could find the best fit for your travel trailer. Lucky for you, you have a Grand Design and they actually list their parts online. Your 2021 Grand Design Imagine 2400BH has 35" axle spacing…

view full answer...

Answer 2

Yes, the equalizer that is included with the Suspension Kit #e99ZR will come with nylon bushings installed. I prefer using bronze bushings with wet bolts myself as they will allow for smoother and quieter operation. The Dexter E-Z Flex Suspension Kit…

view full answer...

Answer 3

The Dexter E-Z Flex Equalizers #K71-655-00 are a great choice. I actually have them on my Jayco Jay Feather and they do a great job smoothing out the ride. These along with the SumoSprings will be a great combination. You currently have 7-3/4"…

view full answer...

Answer 4

I do have a couple options for you as the Equa-Flex Cushioned Equalizers #LC279688 are only recommended from Lippert to work with 6,000-8,000lb axles. I recommend the Dexter E-Z Flex Suspension Kit #K71-653-00 on your 2021 Grand Design Imagine 2910BH…

view full answer...

Answer 5

There is a really good chance the Lippert Road Armor cushioned equalizer part #LC696740 will fit your 2019 Coachmen Apex 300BHS but you will want to measure your current equalizers to be sure. If your current equalizers has 6 inches between the…

view full answer...

Answer 6

For your 2018 Grand Design Imagine 2600RB you will need to measure the axle spacing by finding 2 common points on your axles to measure between. Generally this is done by measuring from center of one axle to the center of the 2nd axle. I never like…

view full answer...

Answer 7

Hey Drue, The MORryde Shock Absorbing Suspension Equalizers #MR27ZR and MORryde AllTrek 4000 Equalizers #MR29DR both have the same 8" eyelet to eyelet measurement and only a 1/2" height measurement distance (not including the travel feature…

view full answer...

Answer 8

We do carry the MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers #MR29DR. This is going to be their 35" wheelbase version which is going to be 8" from center of front shackle mounting hole to the center of the rear shackle mounting…

view full answer...

Answer 9

The Lippert lift kit part #LC425750 that you referenced is a single axle lift so it would not work on your 2016 Coachman Apex Ultra Light 269RBSS as it is a tandem axle trailer. For a tandem axle lift kit the part number you'd need is the #RR23QX…

view full answer...

Answer 10

Thank you for the details! The Road Armor line doesn't really have anything that matches up so we'll want to look at the MORryde and Dexter Axle options. For the MORryde we have the kit #MR27ZR which is a little longer and lower but will…

view full answer...

Answer 11

The Dexter E-Z Flex Suspension Kit #K71-653-00 is designed for axles up to 8,000lbs with an equalizer that has bolt holes 7-1/4" to 8-1/4" wide and 2-7/8" tall. These are most commonly found on axles that have a 35" spread but…

view full answer...

Answer 12

There are a few things that can cause bounce with a bumper pull trailer. Generally, bias ply tires would not contribute to trailer bounce, unless they are excessively worn. Trailer bounce is can be caused by worn out suspension components. You will…

view full answer...