Should I Add A Shock Kit To My 2018 Grand Design Reflection 150 Series Camper?

Question

Question:

I have a 2018 Grand Design model RK220 150 series 5th with Dexter Equalizers on it should I add a shock kit to the axles as well ?

asked by: Michael Y

0

Expert Reply:

There really are no drawbacks to adding a shock kit to your 2018 Grand Design Reflection 150 Series 220RK. I do like them as they will smooth out the ride and actually help with sway issues as well. There are a few options to choose from and though they are more expensive, I do prefer the Roadmaster options. These have a Lifetime Warranty and come as tandem axle kits as well. I was unable to find the capacity of the axles on your camper, so I do have all three options listed below.

Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 3,500-lb Axle # RM-2450
Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle # RM-2460
Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 8,000-lb Axle # RM-2470

expert reply by: Lazer S

0

Answer 1

Thanks for reaching out, Bret! If your axles shifted from being located above the equalizers to below your equalizers then it sounds like replacing your bushings, equalizers, and shackle straps will fix the issue. As long as your leaf springs are in…

view full answer...

Answer 2

Your 2020 Nitro Z20 has an average weight of 4,000lbs. For that weight I recommend using the 6,000lb Dexter E-Z Flex Suspension Kit #K71-652-00. You will want to verify this with the spacing or your current equalizer. This kit is designed to replace…

view full answer...

Answer 3

Since the MORryde AllTrek 4000 Equalizers #MR29DR sits inside the middle hanger like a standard equalizer you'd want to use the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR. This crossmember will use your wet bolt and come with…

view full answer...

Answer 4

I do have some direct equalizer upgrade options for you, but the Road Armor Shock Absorbing Equalizer Kit #LC696740 won't work unless you get longer shackle straps, but even then if you already have 3-1/8" long shackles you won't be able…

view full answer...

Answer 5

If everything is still in good shape there's no need to replace it. The springs sometimes last a very long time. But if you wore out the rubber rin the EZ Flex it's time for a new kit as the rubber is not replaceable. Based on your trailers…

view full answer...

Answer 6

Definitely looks like the springs are being overloaded and need to be replaced. You can use higher rated leaf springs but, the higher you go the stiffer the ride will be. Since we know the weight class with your axles the next step would be to…

view full answer...

Answer 7

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…

view full answer...

Answer 8

I recommend going with the MORryde AllTrek 4000 Equalizers #MR29DR over the Lippert Road Armor #LC696740 on your 2020 Coachmen Chaparral 33TSIK. With the Road Armor bolts only spread 6" on center and your current leaf spring sitting relatively…

view full answer...

Answer 9

When you replace or upgrade equalizers on your 2019 Grand Design Imagine 2250RK you want to make sure they have the same or very similar measurements. Unfortunately, the equalizers that came with the #K71-359-00 are way too short and will cause…

view full answer...

Answer 10

I would be happy to walk you through how to determine which replacement components you will need, but you will need to take a few measurements of the components on your trailer. First the #013-144-03 you were looking at measures 7-3/4" from…

view full answer...

Answer 11

Hey Ken, thanks for reaching out! The MORryde ALLTREK 4000 Shock Absorbing Equalizers, 33" Wheelbase #MR89DR or 35" Wheelbase #MR29DR, are a good upgrade to a standard leaf spring suspension and will help to provide a better ride quality…

view full answer...

Answer 12

I couldn't find any info on the Dexter equalizer part number you mentioned but if the dimensions of the part #K71-653-00 that you referenced match what you have on your trailer this would work well. I attached a picture that has the dimensions of…

view full answer...