Replacement Hangers, Equalizer, U-Bolts, Springs For a 2015 Keystone Carbon 327 5TH Wheel Toy Hauler

Question

Question:

I submitted a question on my 2015 Keystone carbon 327 I need some more information. my trailer is a tandem axle so i need part #s for the upgrade shackle kit my shackles measure 3 1/4 inch to the eye. I also need hanger brackets which measure 3 1/8" to the bolt hole. also my springs measure 26" weighted. as for the crossmember i have a drain pipe that hangs down about 3" to the bottom of the pipe but about 1 1/4 inches above the hanger. also do you have u bolts for a 3" tube axle. Thanks for your help

asked by: Randy G

0

Expert Reply:

Thank you the pictures are a great help. I recommend using the MORryde AllTrek 4000 Equalizers # MR29DR with the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 3-1/8" # MR26ZR for your 2015 Keystone Carbon 327 5th wheel camper. These straps are much thicker than the thin straps you got from the factory so they will not elongate like your current straps which now measure 1/8" longer. We have the 3-1/4" Hanger # 28-5 which will work as a replacement for your front, center or rear hangers. It measures 3-1/4" from the top of the hanger to the center of the mounting hole. You will want to add the MORryde X-Factor Dropdown Crossmember # MR84AR to all your hangers to give them more added strength and clear your sewer line. Do not worry about them hanging down as your axles will sit much lower.

I recommend using 2 of the CE Smith U-Bolt Kits # CE23003 as these offer galvanized plates and zinc coated bolts and nuts for better corrosion resistance. Our 6-Leaf Double-Eye Spring # e64SR is our only 7,000lb leaf spring we currently carry. This spring is 24-7/8" long with no weight on the axles. If you were to flatten the spring the measurement would be 26-3/8" so if you springs are nearly flat these may be the correct replacement.

expert reply by: Bud M

0

Hanger Measurement
(click to enlarge)

Sewer Pipe Clearance
(click to enlarge)

Shackle Strap Length
(click to enlarge)

Answer 1

Hey Bekzod, So while we don't have a way of knowing the exact leaf springs for your Arctic Wolf 5th wheel trailer, I can help you determine the correct replacements. You do have to take a measurement, though it's pretty easy, as all you need…

view full answer...

Answer 2

Hello Steve. Thank you for emailing me the picture of your suspension, as they are always most helpful. Leaf springs have the tendency to stretch out over time which does not give us an accurate measurement, so with your leaf springs measuring at…

view full answer...

Answer 3

Hi Jeff; to find the right replacement leaf springs you will need to know your axle capacity and find their length. If you don't already know the capacity, check the axle tag to see if it is listed. If you only have a serial number the axle…

view full answer...

Answer 4

What's up, Chuck? You can definitely use higher-rated springs for your trailer, and for that I recommend checking out the 25-1/4" Long 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles #DX95CR. Be sure to change out the leaf springs on…

view full answer...

Answer 5

I recommend going with the MORryde AllTrek 4000 Equalizers #MR29DR over the Lippert Road Armor #LC696740 on your 2020 Coachmen Chaparral 33TSIK. With the Road Armor bolts only spread 6" on center and your current leaf spring sitting relatively…

view full answer...

Answer 6

Hey John, To determine the correct replacement leaf springs for your trailer you'll want to jack up one side to take the pressure off the leaf springs and then can measure from the center of one eyelet to the center of the other eyelet. From…

view full answer...

Answer 7

Hey Mike, To determine if the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR would be a compatible fit you'll first want to measure the bolt hole spacing on your current equalizers. The #MR87ZR has a 6-1/2" center to center…

view full answer...

Answer 8

Yes Robert, you are able to use the Standard #MR33WR MORryde X-Factor Crossmember on your center hanger with the CRE3000 Equalizer #MR34AR. And use the Dropdown #MR84AR crossmembers on the front and rear hangers since you have the plumbing clearance…

view full answer...

Answer 9

Hello Jacques, thanks for reaching out. Yes, you can put just one MORryde X-Factor Crossmember #MR33WR on the center hanger for starter. MORryde does recommend doing all 3 for optimal support, but it is perfectly acceptable to start with just one as…

view full answer...

Answer 10

Since you measured your springs with weight on them I am going to recommend a couple of different length springs as replacements. You will want to verify how long your springs are without weight on them before purchasing. The compression caused by…

view full answer...

Answer 11

If you want the best, it's the MORryde Rubber Equalizers for Tandem Axle Trailers part #MR87ZR. These are the best as they offer the most travel which is basically how much that rubber bushing compresses and the more it compresses, the better…

view full answer...

Answer 12

The Roadmaster Comfort Ride System part #RM-2450 will give you a smoother ride than the Lippert system part #LC281255 that you also mentioned. Our customers prefer the Roadmaster over the Lippert also because of the ease of install too. Some people…

view full answer...

Replacement Hangers, Equalizer, U-Bolts, Springs For a 2015 Keystone Carbon 327 5TH Wheel Toy Hauler

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching