Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces master cylinder for Titan and Dico Model 10 and Model 20 brake actuators for drum brakes.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be having a look at the Titan master cylinder for Titan model 10 and 20 actuators with drum brakes, part number T2374400. Here's what your master cylinder looks like. As you can see, we have a new push rod assembly for it too, and a new cap for our fluid reservoir. Now, the reason you want a new master cylinder is it saves you the hassle and expense of replacing your entire coupler assembly with your actuator. This will allow you to just unbolt a few items, undo one break line, and you'll be able to get your trailer on the road again with working brakes. All right, we have a coupler here sitting on our work bench for demonstration purposes to show you how this would go on. We'll start by prying off this cover with a flathead screwdriver, just go up underneath it and work it out.
Now you can see where your cap is for your master cylinder. We'll unscrew that, get it out of the way. Then we have four bolts to hold our master cylinder assembly in place, two on each side, going to remove all four of those. We'll slide it out with the bracket it's mounted on. We'll undo the four bolts that hold the master cylinder to the bracket.
Now, our master cylinder's held to our bracket with two bolts, and two nuts with star washers. We'll unbolt these real quick. The master cylinder removed from the bracket to place the new one on. We'll tighten down our bolts that hold it to the bracket. Now if you didn't purchase a new fitting that your brake line screws into in the back of your master cylinder, you'll need to swap that, so we'll just loosen that up.
Pop off the plug, and we'll screw that in. We do have these fittings available separately on our website if you'd like to purchase a new one. I'll just snug that back down, we'll remove our cap from the new master cylinder and we'll slide it into our actuator. We'll just push our master cylinder in so our holes line up again. Once you have one started it's a lot easier for the rest because the bolts holding the pressure off of the plunger. Okay, with all our bolts started we'll snug them down again.
Okay, with it bolted down we install our reservoir cap, pop back on our cover here. Once it snaps back in place, your install's complete. Okay, so that shows you how to replace the actual master cylinder itself inside the coupler. If you we're doing this on your trailer, you would have to make sure you replace your brake line here, screw it back in there, refill your reservoir brake fluid and then bleed the brakes on your trailer. It's a real simple process to do, just bleed it like you would any other hydraulic actuator for a master cylinder. There you have it. That completes our look at the Titan master cylinder for Titan model 10 and 20 actuators for drum brakes, part number T2374400.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
You should include the hose coupling fitting. Over time the manufacturer has changed the fitting size. The old one won't fit! I had to order a new fitting and now I have to wait another 6-8 days to complete this repair.
The actuator looks good I have assembled it in place.
Fits Good although Exit Port was not sized right, Which made me have to purchase
one more item which I had to have. Costing me extra shipping. I must learn to look
closer at the display and see if more was offered. Everyone wants to save or make more Money.
The product worked great the time i had the surge brakes installed. I later changed them to electric and that works way better.
Product was exactly what i expected and at a great price. Shipping was fast. My only regret was not ordering the special brass adapter sold along with this new brake cylinder. The tread size on the new master cylinder is 1/8 in and my original one was 1/4 in. Oops.
I looked everywhere and could not find the parts i needed, I came across etrailer.com and found every part i needed with a very good price. The site is very helpful with information and video's. Now I can get my trailer finest with the right parts and not jerryrig it.
This fit perfectly into my Titan Model 10 actuator for drum brakes. The filler cap is plastic but so I kept my old metal cap and used that instead. I'm keeping the plastic one as a spare.
Received product quickly and accurately. One important thing I didn’t realize was the back port size for the old Titan model 10 for drums is different this new model so you MUST buy the reccomemded fitting or you’ll very disappointed. You must have the correct size fitting otherwise your system will have to much pressure and cause your brakes to “shutter” or grip to hard when braking.
This Titan master cylinder for a hydraulic brake actuator was just as advertised. Fit and function were perfect. The machining was an exact match to the original 20 year old unit that I pulled from my Dico model 10 "Surge-O-Matic" actuator.
The only differences (unimportant) were the plastic fill cap, (as opposed to metal) and the smaller orifice connector requirement. Otherwise, the perfect replacement solution.
There isn't, a company out there, that can touch the price of this master cylinder !!!!
Excellent quality ! It is a replacement on a tow trailer. The video and tech report,<> right on ! >>> A +++++ <<< Direct to the point <> in a format, easy to understand . < { No > humbo --jumbo < } > Good old plain < ENGLISH > !
Thank you ____!
Excellent service! I tried looking for a master cylinder for my boat trailer here in town and wasn’t able to find anything. Then I googled the part number and found these guys! Great fast shipping! Great quality parts!
Definitely recommend them anytime!
I had an older trailer and was able to identify all the components I needed by looking at the pictures on the web sight. Found everything I needed, ordered and it was at my door 3 days after shipping. All parts where what I needed. Excelent.
Order arrived quickly. Charged shipping when I thought it was included since I was ordering an item not stocked.
Went to install master cylinder needed a T1209800 Orifice.
called Titan engineer said he told the E Trailer person calling on the needed cover that I would need the Orifice to connect brake line. Now I have 3 separate shipping charges to get what I need.
etrailer is great! They had exactly what I needed, great customer service and fast and free shipping on my order, they also sent emails to keep me updated on the one item they didn't have stocked. Thank you
Just what the doctor ordered. Shipping was great and on time.
the product seems to be a very good one. The shipping was quick, the whole deal went very smoothly. Thanks, Ernie
Ernie P.
3/18/2015
seems to be holding up well, it is nice to have brakes work as they should on a heavy trailer and machine.
I was unable to find this part locally and was hesitant to look on-line as I wasn't positive of what I needed. Etrailers customer service, selection and shipping was spot on; they will be my first choice in the future.
[...] wants $185 for the same master cly.And etrailer was less than $60 fits perfect glad I Check the internet
Walter E.
7/20/2017
Like it was supposed to no problem good products
master cylinder came just as described ; easy install and worked good.
trailer hitch repair coupler workedgood also.
Exact fit. Works good. Nice having brakes again. Etrailer was great. Fast shipping. Everything was top notch.
Brian
6/24/2015
Brakes still doing great. Awesome job guys.
I haven't installed this item yet but will do as soon as my boat is out of the shop plan too. I was going to replace the whole actuator unit until I saw a [online] video. these guys had the exact part for my trailer and purchased the electronic brake backup unit. shipping was fast and excellent prices as matter better than [online retailer]. I have some more parts to purchase to complete my trailer brake overhaul..
highly recommend these guys.
Lewis
3/16/2021
This was actually a fun project though I would say it looked very intimidating. The product works great and went in much easier than anticipated. my friend was so impressed we ordered one for his trailer overhaul
Discharge port size change. Orfice was 1/2-20. New master is 3/8-24. Had to make orfice match.
just like OEM works great!
Ordered a replacement master cylinder for my trailer, the part was the same as OEM bolted up fine. Exactly what I needed.
Alex
2/22/2020
Product still works fine use it a couple times a month holding in there
Replacement for Brent 644 grain wagon you will need the brass fittings also as the thread is different from original.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gl
7/24/2017
still working great, takes a lot of abuse but keeps on pumping!