Parts Included with Titan Replacement Master Cylinder DX66FR for Model 10 and 20 Actuators
Updated 10/07/2010 | Published 10/05/2010
Question:
Do these master cylinders come with seal boot and push rod.
asked by: Earl H
Expert Reply:
I spoke with my contact at Dexter, and the # DX66FR master cylinder does include the boot and push rod, but their design does not require the gasket. Please note that this master cylinder is a replacement part only for the Titan brand Model 10 and Model 20 actuators.
My contact also mentioned that the orifice size on this master cylinder has been changed to a 1/8 inch NPT (National Pipe Thread) in the past seven years, so if you have an older model actuator, the orifices would differ in diameter and you would need to install new ports/connectors.
Product Page this Question was Asked From
Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Master Cylinder
- Dexter
more information >
Continue Researching
- Video: Replacement Master Cylinder and Push Rod Assembly for Drum Brakes Spec Review
- Shop: Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators
- Q&A: Replacement Master Cylinder, Cap and Shock For Titan Model 10 Drum Brake Surge Actuator
- Video: Review of Dexter Brake Actuator - Solenoid Adapter Fitting - T4750200
- Video: Feature Review Replacement Master Cylinder for Dexter Model 10 and 20 Actuators
- Video: Titan Brake Actuator T4748800 Review
- Video: Feature Breakdown: Replacement Orifice Connector for Dexter Actuators
- Q&A: Replacement Master Cylinder For Dico Model 20 Surge Brake Actuator
- Q&A: Replacement Master Cylinder for A Cylinder Stamped 23744
- Shop: Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Drum
- Shop: Replacement Gasket for Older Orifice Fitting - Dexter Model 10 and Model 20 Brake Actuators
- Shop: Replacement Master Cylinder for Toledo Drum Brake Actuators
- Shop: Replacement Orifice Connector for Dexter Actuators
- Shop: Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Shop: Replacement Solenoid Adapter Fitting for Dexter Model 10 Brake Actuators Made Before 2010
- Q&A: What Adapter Do I Need For My Titan Model 10 Replacement Master Cylinder
- Q&A: How To Replace Master Cylinder For Titan 10 Brake Actuator
- Q&A: Replacement Master Cylinder for Titan Model 10 Actuator on 1999 Prestige Trailer
- Q&A: What Adapter Fitting for Master Cylinder 4747100 and 3/16 Inch Brake Line?