Does Draw Tite Hitch # 75085 Fit ZR2 Version of 2003 GMC Sonoma

Question

Question:

I have a 2003 GMC Sonoma ZR2 I was told the frame is wider then the base 4x4. I dont know if this is true or not. Will this hitch or which one fits?

asked by: Tony L

0

Expert Reply:

Draw Tite has confirmed for us that their hitch part # 75085 that you referenced is does fit the ZR2 models of the 2003 GMC Sonoma so this will work great for you.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact at Draw-Tite, who tells me that the Class III #75085 receiver will fit the 1999 S-10 Sportside with the non-towing bumper. He did not have any information regarding fit on the Extreme model, which means that some trimming of…

view full answer...

Answer 2

On a trailer hitch receiver, concealed means the crosstube does not show at the rear of the truck, just the receiver does; while exposed means the crosstube and the receiver show. A lot of people really like the concealed crosstube because it keeps…

view full answer...

Answer 3

For your 2000 GMC Sonoma 4x4, the Draw-Tite Max-Frame Trailer Hitch Receiver #75085 is a confirmed fit for the Sportside with non-towing bumper as well as the Factory Step bumper. It is not a fit for the ZR2 models or the Factory Roll Pan bumper. It…

view full answer...

Answer 4

If you have a factory step bumper or your 1996 S-10 is the ZR2 model, the trailer hitch I recommend is part #75051. If you have a Sportside with a non-towing bumper, the hitch I recommend is part #75085. These are Class lll hitches and they have…

view full answer...

Answer 5

Your 2003 GMC Sonoma and a 2002 Chevrolet S-10 do indeed use the same trailer hitch receivers due to them having the same trailer hitch mounting locations, but you will need to make sure the hitch matches the options of your truck. What I mean is…

view full answer...

Answer 6

For your 2001 Chevy S-10 with the factory step bumper what you would need is the Curt hitch part #C13021 which is a confirmed fit for your truck and it's configuration. The #C19031 that you referenced is a universal install hitch that isn't…

view full answer...

Answer 7

The Curt Class III hitch you'd looked at, part #C13021 is indeed a fit for the 2002 GMC Sonoma with the factory step bumper, as shown in the provide photo. If you'll be using the hitch for towing, you can install a 4-pole trailer connector…

view full answer...

Answer 8

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 9

The correct hitch will depend on which bumper your S-10 is equipped with. For a factory step bumper, I'd recommend the Curt #C13132. For a roll pan bumper, you'll want to use #13920, but you'll need to cut a hole in the license plate well…

view full answer...

Answer 10

Hey Jamie. Reese was bought out by Draw-Tite awhile back so their hitch for a 2002 Chevy S-10 is item #75085. It's a bit backordered but I do have an identical alternative. For your 2002 Chevy S-10, I recommend the Curt Hitch item #C13021. This…

view full answer...

Answer 11

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that…

view full answer...

Answer 12

Thank you for the photo; it looks like your 1997 Chevy S-10 is the Sportside with non-towing bumper and the trailer hitch that fits is the Draw-Tite #75085. This is a Class III hitch that is a complete bolt-on installation so no drilling into your…

view full answer...

Does Draw Tite Hitch # 75085 Fit ZR2 Version of 2003 GMC Sonoma

Continue Researching