Curt VS Draw-Tite Hidden Cross Tube Trailer Hitch Receivers For a 2018 Subaru Outback

Question

Question:

Looking for a hitch for my 2018 Subaru Outback. I just got the Hollywood Rack SportRider SE2. Any big differences between the Curt and the Draw Tite? Thanks!

asked by: Matt

0

Expert Reply:

The Curt # C13410 and Draw-tite # 76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that will help give the 2" receiver additional strength.

I do recommend installing the 4-Way # C56040 when you install the receiver. This will be much easier to route outside your vehicle when you have the bumper cover removed so you do not have to run it outside the rear door when it is needed.

expert reply by: Bud M

0

Matt

4/15/2024

Is there a difference in the ground clearance between the Curt and the Draw Tite?

Reply

Bud M.

4/16/2024

@Matt They are going to be virtually identical on the ground clearance. We have installed both of these on several different years and we always ended up getting around 13" of ground clearance for both.

Reply

Answer 1

Hey Karston, the best hitch solution for your 2019 Subaru Outback Wagon would be the Curt hitch part #C13410 as it has great towing capacities, has best ground clearance, and only minimally modifies the rear fascia. For trailer wiring you'd then…

view full answer...

Answer 2

Hi John; I'd definitely get a frame-mounted hitch for your 2017 Subaru Outback to tow a small camper. I'm not aware of a bumper-mounted hitch for your Outback, but if there were one I definitely wouldn't trust it for towing purposes.…

view full answer...

Answer 3

The trailer hitch with the best receiver depth, or bumper clearance, for your 2019 Subaru Outback is the Draw-Tite Trailer Hitch #76227 which is about 2 inches from the hitch pin hole to the edge of the bumper. This is an inch more clearance than the…

view full answer...

Answer 4

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 5

For your 2011 Subaru Outback Wagon the best hitch for ground clearance is the Curt #C13410 which fits very tightly to the rear bumper of the vehicle but also doesn't have a crosstube that hangs below the bumper either which helps with ground…

view full answer...

Answer 6

The Flint Hill Goods Cargo Carrier #FHG49ZR is designed to be used with the threaded hitch pin that it comes with, so a standard, non-threaded hitch pin won't work. The threaded pin is used as an ant-rattle mechanism. If you're looking for a…

view full answer...

Answer 7

The Curt hitch receiver item #C13410 and the Draw-Tite hitch receiver item #76227 are identical hitches in almost every way. They both have the same capacities and installation methods and are hard to identify once they're installed on a Subaru.…

view full answer...

Answer 8

Both the Draw-Tite Max-Frame Trailer Hitch Receiver #75673 and the Curt Trailer Hitch Receiver #C13206 will require drilling to install on your 2017 Subaru Outback Wagon. It is only a 1-1/8" access hole though so it is pretty minimal. The reason…

view full answer...

Answer 9

The EcoHitch Trailer Hitch #306-X7601 and Draw-Tite Trailer Hitch #76227 are very good choices for your 2019 Subaru Outback and would be my top options as well. The one thing EcoHitch normally has going for it is that is usually the only option for a…

view full answer...

Answer 10

Hey Andy, thanks for reaching out. The EcoHitch #EH55SR is correct for the 2024 Mercedes-Benz GLE 450 SUV. The installation is a bit more complicated than most other trailer hitches. There is no drilling required but you do have to completely remove…

view full answer...

Answer 11

I do have a 2 inch hitch that is a no-drill installation for your 2016 Subaru Outback. It is the Curt #C13410. These hitches are getting very popular with Subaru owners. I have linked a video showing an example installation for you. Although the…

view full answer...

Answer 12

Draw-Tite and Curt are 2 of the leading brands when it comes to towing products so a lot of their hitches look pretty similar since they are in competition with each other. When it comes to the Draw-Tite #76227 and the Curt #C13410 I recommend going…

view full answer...

Curt VS Draw-Tite Hidden Cross Tube Trailer Hitch Receivers For a 2018 Subaru Outback

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching