Does MaxxAir MaxxFan Vent Repalcement Motor Have Replacement Brushes

Question

Question:

Do you know where I can find brushes for this motor? Or do you have a part number for them? Thank you.

asked by: Erik S

1

Helpful Expert Reply:

I checked with MaxxAir, and there are no brushes available for the replacement motor, which is the Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof Vents # MA10-20968.

So if there is an issue with the operation of the motor, you would need to replace the entire motor assembly.

I have added a link below to a video review for you as well of the Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof Vents # MA10-20968.

expert reply by: Kyle S

1

Jonas.

4/1/2025

Is this a brush motor, or brushless motor?

Jesse M.

4/1/2025

@Jonas According to the manufacturer, the motors in the MaxxAir MaxxFan such as the # MA10-20968 mentioned above have brushes and ball bearings in them.

Jonas

4/2/2025

@JesseM Thank you, I really appreciate the follow-up. I'm buying aftermarket controllers for our MaxxAir fans. We've lived full-time in this rig for over five years, and I'm constantly replacing the boards and switches. Too expensive. I love the fans, and wanted to make sure I'm getting a proper controller. Thanks again. PS eTrailer has been a long time favorite supplier since we purchase our 1979 Avion 34V, in 2019.

Jesse M.

4/2/2025

@Jonas Of course! Glad I could help. We are honored to be your favorite trailer parts supplier. That is a pretty sweet vintage camper by the way. Feel free to come back anytime you need anything. There will always be a real person here to help you find what you need :)

Chris

2/8/2026

If yoy know how to diaassembke and replace brushes. Replacement brush assortments contain brushes and brush springs for almost any electric motor. If there are no ther electric issues and the bearings are good do it your self.

Answer 1

Hey David, thanks for reaching out! The Replacement 12-Volt Variable Speed Fan Motor #MA10-20968 does not have a warranty. We have a returns policy, that I'm linking for you to check out, but that won't be the same as a warranty. Most…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Does MaxxAir MaxxFan Vent Repalcement Motor Have Replacement Brushes

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching