Recommended Front Mount Trailer Hitch for a 2020 Ram 2500

Question

Question:

I am looking for a front receiver hitch or my 2020 Ram 2500 with a Cummins Turbodiesel. It appears that the EcoHitch part # EH37FR will fit. Is the hitch manufactured by CURT or similar manufacturer? Thank you in advance for your assistance.

asked by: Angelo B

0

Expert Reply:

I have some great front mount trailer hitch options for a 2020 Ram 2500. The best one is the EcoHitch Hidden Front Mount Trailer Hitch Receiver part # EH37FR (Made by TorkLift) as it provides the most ground clearance. There are however other options such as the Curt Front Mount Trailer Hitch Receiver part # C31089 which is also a great option and is more cost effective but sits lower to the ground therefore reducing ground clearance further.

expert reply by: Conner L

0

Answer 1

We sure do! The only front hitch that is compatible with the 2023 Ram 3500 with a diesel engine is the EcoHitch item #EH37FR. This hitch is custom fit and bolts to your Ram with included hardware. I have linked an installation video below to help you…

view full answer...

Answer 2

You will need the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR for your 2020 Ram 2500 Diesel with the parking sensors. The EcoHitch #306-X7900 only fit up to the 2010-2018 model years. This hitch will included a license plate bracket if…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Recommended Front Mount Trailer Hitch for a 2020 Ram 2500

Product Page this Question was Asked From

Continue Researching