Mounting Hardware for Draw-Tite Hitch 76419 on Chevy Equinox

Question

Question:

I bought a Draw-tite max trailer hitch from etrailer for my 2019 Equinox and now I would like to transfer it to my 2021 Equinox. Can I buy just the bolt kit?

asked by: Rodney S

0

Expert Reply:

You can absolutely buy just the mounting hardware for the Draw-Tite Max-Frame Trailer Hitch Receiver # 76419 that fits your 2021 Chevy Equinox. It's a good idea as well, because mounting hardware is one-time use only so it is absolutely the safer option.

All you need is the is the Replacement Hardware Kit for Trailer Hitches # RHK.

So you'll just click # RHK, and once on the page enter "76419" in the "Hitch Item Number" box, select "Draw-Tite" from the drop-down menu, hit "Add to Cart" and you're set!

expert reply by: Kyle S

0

Answer 1

Hey Dayne, We do not offer any jacks that were made to be ramp door supports for toy haulers, but most of the time people will use stabilizing jacks #TJ01RT-HD mounted to the bottom of the ramp door. This will fold up pretty compactly when not in…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Mounting Hardware for Draw-Tite Hitch 76419 on Chevy Equinox

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching