See what our Experts say about this Timken Trailer Bearings Races Seals Caps

• Timken Double Lip Grease Seal To Replace Grease Seal # GS-2250DL
  You can use the Timken Grease and Oil Seal # TMK98ZR in place of the Grease Seal # GS-2250DL. While they are not exactly the same seal construction it is still a double lip design and the dimensions are the same so they are going to fit correctly.
  view full answer...
• What is Difference Between TruRyde and Timken Grease Seals
  Hey George, honestly not much really. The Timken brand like the seal part # TMK98ZR used to be associated with being made in the USA and higher quality but they aren't made in USA any longer so between that and the part # RG06-070 there's not much of a difference.
  view full answer...
• Replacement Bearings For A 6,000 Pound Dexter Axle
  Hi Roger! I contacted Dexter with your axle information and you will need the # 25580 inner bearing and # 14125A outer bearing. If you want the races as well, you will need the # 25520 and # 14276 respectively. The seal will be the Double Lip - 2.250" ID - 3.376" OD # GS-2250DL. These are all our branded parts, but if you wanted American made Timken ones, you will want the following parts: Inner Bearing: # TMK44FR - Race: # TMK76FR Outer Bearing: # TMK54FR - Race: # TMK96FR Seal: # TMK98ZR Any...
  view full answer...
• What Bearings, Races, and Grease Seal do I Need to Replace My Timken 2785 and 1779 Bearings?
  Hello Nathan, I had to get some of the parts added to the site, so my apologies for the delay in getting an answer. You will need one of each per hub: -Timken 2785 Tapered Roller Bearing Single Cone - Imperial - 1.75" ID for Axles & Hubs # TMK78ZR, with race # TMK88ZR (this might not pop up on our site til tomorrow 5/9 as it was just added) - Timken Replacement Trailer Wheel Bearing - 1779 # TMK94FR with cup/race # TMK66FR - Cotter Pin - 1/8" Thick x 1-3/4" Long # 165649 - For the...
  view full answer...
• Grease Seals for Lippert 5,100 lb Axles
  Hi Robert; your Lippert axles use the # GS-2250DL grease seal or # RG06-070 for a pair. If you would prefer a Timken grease seal we also have the # TMK98ZR.
  view full answer...
• Replacement Timken Parts for 25580/15123 Bearings and 10-36 Seal
  Hey Jason, thanks for reaching out! We have the Bearing Kit # BK3-100 which comes with everything you're needing, but these are made overseas. In order to get a set of Timken you'll need to order the following: - 25580 # TMK44FR - 25520 # TMK76FR - 15123 # TMK34FR - 15245 # TMK46FR - Grease Seal # TMK98ZR Is there anything else you're needing to work on/replace?
  view full answer...
• Can The GS-2250DL Seal Be Used In An Oil Bath System?
  Hello Ray, thanks for reaching out. The # GS-2250DL are for grease only, and they are not intended to be used in an oil bath system. A better option for that is the Timken Grease Seal part # TMK98ZR. This is identical in size to the # GS-2250DL seal, only the Timken seal can be used with grease or oil.
  view full answer...
• Looking For A Bearing Kit For My 2025 Grand Design Momentum Mav 4
  Hey Brandon, Unfortunately we do not have a way of knowing exactly what bearings came on that Grand Design by just the model. I did however try and do some research on that trailer and it is so new that I cannot find any confirmed specs on it! With that said you are going to have to remove a wheel and hub and either get part numbers or measurements to determine what is needed. I have attached a photo for you that shows where to find bearing numbers or measure to get the correct size. Are...
  view full answer...
• Is The Timken TMK98ZR The Same As The National 452920/482920 Seal?
  Hello Nick. The # TMK98ZR seal is made by Timken. It has a 2.250" ID and 3.376" OD .This is one in the same as the National 452920/482920 seal so they are interchangeable. A lot of folks prefer the Timken brand since they are made here in the USA.
  view full answer...
• What Timken Bearing Kit Fits My 2024 GD Imagine 2600 with axle# LC152 - SBSA -86.5-68.5- NOSP-OS -L?
  Hi Shan, It is common for the 3.5K and 4.4K Lippert axles to use the same bearings and seals, so often the same kit is suggested for both. However, the axle serial number that you included, "LC152 - SBSA -86.5-68.5- NOSP-OS -L-65517-RED -ABS-7225-30SPT-CAP” breaks down to a Lippert 5.2K axle based off of the LC152 so the TMK52VR wouldn't work for 5.2K axles. Your axles should have the EZ-Lube spindles on them, so instead you'll need the Timken Bearing Kit LM67048/25580 Bearings, LM67010/25520...
  view full answer...
• Replacement Bearings & Seals For A 2025 Brinkley Z3300 With Curt TCS Axles
  Hi Jerry! We have your 2025 Brinkley Z3300 with those cool Curt TCS axles covered! I did some looking and the Z3300 comes with 8K axles, so you will need the following bearings: Timken Replacement Trailer Wheel Bearing - 25580 # TMK44FR Timken Replacement Trailer Wheel Bearing - 02475 # TMK75FR We don't carry National seals, but I do have what we have listed below (Timken, Dexter, and Lippert): Timken Grease and Oil Seal - Double Lip - I.D. 2.250" / O.D. 3.376" - 452920/482920 # TMK98ZR Dexter...
  view full answer...
• Replacement Bearing Kit For 2021 Grand Design 25G Toy Hauler With 6K Dexter Axles
  If you are looking for the bearing kit we have our etrailer Kit # BK3-100 or the Timken Kit # TMK42VR which is going to match the Dexter bearing 031-029-02, 031-030-02 and seal 010-036-00 numbers you were given. It would be best to just order the 4 sets you will need having a tandem axle trailer and if the bearings and races are safe to reuse you could simply order 4 of the seals # GS-2250DL or Timken Seals # TMK98ZR. Then you can keep the kits with the trailer in the event you ever have...
  view full answer...
• Tools Needed To Drive In A Trailer Hub Grease Seal
  Hi Steve, Yes, we offer the 7-Piece Installation Set for Bearings, Races, and Seals # PTW83020, which you can use to drive in your grease seal # TMK98ZR. If you're ever in a pinch you can also use a block of wood that's longer than the inner diameter of the hub bore hole to drive in the seal without pressing it too far in.
  view full answer...
• Is Timken Trailer Hub Grease Seal Better than 10-36
  Hey Con, welcome back! So most of the time you won't see a difference between running a seal like the 10-36 and the USA made Timken part # TMK98ZR but Timken is the premium brand for a reason and if you want peace of mind knowing you have the best seal that won't let go while on the highway at higher speeds this is the seal to get. They have the tightest quality control and overall are as well made as they can be so it's sure thing they will hold up. Have you had seals let go for you before? I...
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?